Image
Product
Price
- Front Rear Semi-Metallic Brake Pads Kit For Jeep Patriot Mitsubishi Lancer Dodg
- Positive Plus Front Rear Semi-Metallic Brake Pads Kit For Jeep Patriot Mitsubishi Lancer Dodge Compass Chrysler Caliber Sebring 200 Avenger KPF-100398
- Positive Plus
- Product Attributes:
- WebNameEbay4: For Jeep Patriot Mitsubishi Lancer Dodge Front Rear Semi-metallic Brake Pads Kit
- ComponentsSummaryRegularWithBrands: 2x Positive Plus Brake Pad Set
- ComponentsSummaryShort: 2x Brake Pad
- ComponentsSummaryLongWithBrands: 1x Front Semi-metallic Positive Plus Brake Pad Set (hardware Included) + 1x Rear Semi-metallic Positive Plus Brake Pad Set (hardware Included)
- WebNamePlain: Positive Plus Front Rear Semi-metallic Brake Pads Kit Kpf-100398
- ComponentsSummaryShortWithBrands: 2x Positive Plus Brake Pad
- NumberOfPieces: 2
- ComponentsSummaryLong: 1x Front Semi-metallic Brake Pad Set (hardware Included) + 1x Rear Semi-metallic Brake Pad Set (hardware Included)
- WebNameLong: Positive Plus Front Rear Semi-metallic Brake Pads Kit For Jeep Patriot Mitsubishi Lancer Dodge Compass Chrysler Caliber Sebring 200 Avenger Kpf-100398
- WebNameShort: Front Rear Semi-metallic Brake Pads Kit For Jeep Patriot Mitsubishi Lancer Dodge Compass Kpf-100398
- ComponentsSummaryRegular: 2x Brake Pad Set
- WebNameRegular: Positive Plus Front Rear Semi-metallic Brake Pads Kit For Jeep Patriot Mitsubishi Lancer Dodge Compass Chrysler Caliber Sebring 200 Avenger Kpf-100398
- WebNameEbay2: [front+rear] Semi-metallic Brake Pads Kit For Jeep Patriot Mitsubishi Lancer 200
- WebNameEbay3: Semi-metallic Brake Pads Front Rear Kit For Jeep Patriot Mitsubishi Lancer Dodge
- WebNameEbay: Front Rear Semi-metallic Brake Pads Kit For Jeep Patriot Mitsubishi Lancer Dodge
-
Features:
- Exclusive PowerGrip™ Semi-Metallic formula provides unmatched braking power (powerful friction, extreme temperature tolerance, aggressive initial bite) while maintaining low dust and noise
- Fiber-Reinforced Multi-Layer Shim with a rubber core minimize noise, vibration, and harshness for complete quietness
- Engineered with High Carbon SteelRX™ alloy (Pressure Resistant, Thermal Conductive) and dipped in an Anti-Rust Black Paint to improve durability
- Precise laser-cut channel cut provides superior thermal stability and prevent overheating
- Scorched for almost no break-in process required, raised initial cold effectiveness, and enhanced Pad-to-Rotor contact
- Chamfered for mooth and gradual initial engagement on the rotor surface to prevent edge shifting
- One-Piece Integral Molding Technology improves the durability of the pads and extends the service life
- Premium Stainless-Steel hardware included (when required by the application)
- Kit Includes: 1x Front Semi-Metallic Brake Pad Set (Hardware Included) + 1x Rear Semi-Metallic Brake Pad Set (Hardware Included)
- Part Reference Numbers : 8338 8402 9290 7741 SG7741X PF9290X AD7741 AD9290 PF7741M PF7741X QE7741X SS7741X SS9290X D866 866 7940 SG7940X PF7940X AD7940 QE7940X SS7940X D1037 1037
- PPF offers the utilmate semi-metallic brake pads on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by PPF certified engineers.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
1037, 7741, 7940, 8338, 8402, 866, 9290, AD7741, AD7940, D1037, D866, PF7741M, PF7741X, PF7940X, QE7741X, QE7940X, SS7741X, SS7940X...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2006 - Mitsubishi Lancer | Front and Rear | Ralliart |
- Front Rear Semi-Metallic Brake Pads Kit For Mitsubishi Chrysler Sebring Eclipse
- Positive Plus Front Rear Semi-Metallic Brake Pads Kit For Mitsubishi Chrysler Sebring Eclipse Galant Dodge Stratus KPF-100400
- Positive Plus
- Product Attributes:
- WebNameEbay4: For Mitsubishi Chrysler Sebring Eclipse Front Rear Semi-metallic Brake Pads Kit
- ComponentsSummaryRegularWithBrands: 2x Positive Plus Brake Pad Set
- ComponentsSummaryShort: 2x Brake Pad
- ComponentsSummaryLongWithBrands: 1x Front Semi-metallic Positive Plus Brake Pad Set (hardware Included) + 1x Rear Semi-metallic Positive Plus Brake Pad Set
- WebNamePlain: Positive Plus Front Rear Semi-metallic Brake Pads Kit Kpf-100400
- ComponentsSummaryShortWithBrands: 2x Positive Plus Brake Pad
- NumberOfPieces: 2
- ComponentsSummaryLong: 1x Front Semi-metallic Brake Pad Set (hardware Included) + 1x Rear Semi-metallic Brake Pad Set
- WebNameLong: Positive Plus Front Rear Semi-metallic Brake Pads Kit For Mitsubishi Chrysler Sebring Eclipse Galant Dodge Stratus Kpf-100400
- WebNameShort: Front Rear Semi-metallic Brake Pads Kit For Mitsubishi Chrysler Sebring Eclipse Galant Kpf-100400
- ComponentsSummaryRegular: 2x Brake Pad Set
- WebNameRegular: Positive Plus Front Rear Semi-metallic Brake Pads Kit For Mitsubishi Chrysler Sebring Eclipse Galant Dodge Stratus Kpf-100400
- WebNameEbay2: [front+rear] Semi-metallic Brake Pad Kit For Mitsubishi Chrysler Sebring Eclipse
- WebNameEbay3: Semi-metallic Brake Pads Front Rear Kit For Mitsubishi Chrysler Sebring Eclipse
- WebNameEbay: Front Rear Semi-metallic Brake Pads Kit For Mitsubishi Chrysler Sebring Eclipse
-
Features:
- Exclusive PowerGrip™ Semi-Metallic formula provides unmatched braking power (powerful friction, extreme temperature tolerance, aggressive initial bite) while maintaining low dust and noise
- Fiber-Reinforced Multi-Layer Shim with a rubber core minimize noise, vibration, and harshness for complete quietness
- Engineered with High Carbon SteelRX™ alloy (Pressure Resistant, Thermal Conductive) and dipped in an Anti-Rust Black Paint to improve durability
- Precise laser-cut channel cut provides superior thermal stability and prevent overheating
- Scorched for almost no break-in process required, raised initial cold effectiveness, and enhanced Pad-to-Rotor contact
- One-Piece Integral Molding Technology improves the durability of the pads and extends the service life
- Chamfered for mooth and gradual initial engagement on the rotor surface to prevent edge shifting
- Manufactured in ISO-certified facilities and 100% asbestos free
- Kit Includes: 1x Front Semi-Metallic Brake Pad Set (Hardware Included) + 1x Rear Semi-Metallic Brake Pad Set
- Part Reference Numbers : 8338 8402 9290 7741 SG7741X PF9290X AD7741 AD9290 PF7741M PF7741X QE7741X SS7741X SS9290X D866 866 7272 SG7272X PF7272X AD7272 QE7272X SS7272X UP7272X D383 383
- PPF offers the utilmate semi-metallic brake pads on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by PPF certified engineers.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
383, 7272, 7741, 8338, 8402, 866, 9290, AD7272, AD7741, D383, D866, PF7272X, PF7741M, PF7741X, QE7272X, QE7741X, SS7272X, SS7741X...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Mitsubishi Galant | Front and Rear |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 216
- 8.5
- End 1 Inside Diameter:
- .28
- 7
- Material: Epdm
- End 2 Inside Diameter:
- .28
- 7
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2006 - Mitsubishi Galant | V | 3828 | Throttle Body Inlet | GAS | 6 Cyl 3.8L | 230 |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 216
- 8.5
- End 1 Inside Diameter:
- .28
- 7
- Material: Epdm
- End 2 Inside Diameter:
- .28
- 7
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10100, 12804553, 1349380J00, 14008S, 18100, 19506P2A000, 19526P5AA10, 63338, 64226, 86824, B86824, F2G813282A, F2G813681, G60913681, G60913682, K80213682, KB6KP13681, KL0113682A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2006 - Mitsubishi Eclipse | V | 3828 | Throttle Body Outlet | GAS | 6 Cyl 3.8L | 230 |
- Greaseable with 1 Piece Rear Drive Shaft 1 Piece Driveshaft 1.062in Bearing Cap Diameter with 3.219in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Greaseable: Y
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Grease Fitting Location: One Lube Fitting In Bearing
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2006 - Mitsubishi Raider | Front Driveshaft at Front Axle | 4WD |
- Universal Joint
- with 3.219in Outside Snap Ring Dimension 1 Piece Driveshaft 1.062in Bearing Cap Diameter Greaseable with 1 Piece Rear Drive Shaft
- HGVF
- Product Attributes:
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Osr
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1-0153, 1-0153G, 1-0154, 1-0200, 1-0278, 15-153X, 2-0785, 269, 280, 329, 369, 379, 380, 45U0107, 45U0111, 45U0121, 45U0145, 45U0150...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2006 - Mitsubishi Raider | Front Driveshaft at Front Axle | 4WD |
- Autolite AP3923 Platinum Spark Plug
- Gap .044 (in)
- Platinum Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.399
- 10.13
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.75
- 19.05
- Center Electrode Tip Material: Platinum
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.007
- 50.98
-
Features:
- Engineered with a platinum firing tip that prevents gap erosion for longer service life.
- Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- The multi-rib insulator prevents flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
- Autolite® Platinum spark plugs are engineered with a platinum center electrode firing tip that provides improved performance and increased durability, making it a reliable choice for all older engine applications and designs. Its platinum design delivers quicker firing, smoother starts, for better acceleration, and improved fuel efficiency.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
1257, 14 FGH-8 DPURX2, 14 FR-7 KPU, 14F-4DPU, 3007, 344, 3720, 4001, 5, 7002, 8002, 8013, 9195166, AGSP22C, BCP6EVX, BCPR6EVX-11, BKR5EVX-11, BKR6EGP...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Mitsubishi Galant | V | 3828 | 6 Cyl 3.8L | 230 |
- Performance Air Intake System
- Polished; Includes Air Filter/Tubing/Heat Shield; Estimated Horsepower Gain 7.28 HP At 4475 RPM;CARB E.O. D-269-37
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Performance Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.000 In. (152mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 7.28 Hp @ 4475 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Rf-1048
- Item Weight: 12.200 Lbs. (5.5 Kg)
- RPM: 4475
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 6.000 In. (152mm)
- Clamp Quantity: 5
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 7 Hp
- Intake Pipe Inlet Length: 21.000 In. (533mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.000 In. (76mm)
- Intake Pipe Outlet Length: 21.000 In. (533mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
- Intake Pipe Outlet Width: 3.000 In. (76mm)
-
Features:
- Guarantee To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Replaces Entire Factory Air Intake System
- Lasts Up To 100000 Miles Before Service Is Required
- Easy To Install Usually In 90 Minutes or Less
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2006 - Mitsubishi Raider | V | - | 8 Cyl 4.7L | DuroCross | 287 |
- Performance Air Intake System
- Polished; Includes Air Filter/Tubing/Heat Shield; Estimated Horsepower Gain 6.03 HP At 4943 RPM;CARB E.O. D-269-34
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N 10-Year/Million Mile Limited Warranty.
- Performance Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.000 In. (152mm)
- Clamp Style: Regular
- Estimated Horse Power Gain: 6.03 Hp @ 4943 Rpm
- Air Filter Outlet Width: 6.000 In. (152mm)
- Replacement Filter: Rf-1048
- Item Weight: 12.000 Lbs. (5.4 Kg)
- Intake Pipe Inlet Length: 19.500 In. (495mm)
- RPM: 4943
- Air Filter Outlet Length: 6.000 In. (152mm)
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.000 In. (76mm)
- Intake Pipe Outlet Length: 19.500 In. (495mm)
- Clamp Quantity: 5
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Package Type: Box
- Prop 65 (C, R or CR): Cr
- Intake Pipe Outlet Width: 3.000 In. (76mm)
-
Features:
- Guarantee To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Replaces Entire Factory Air Intake System
- Lasts Up To 100000 Miles Before Service Is Required
- Easy To Install Usually In 90 Minutes or Less
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2006 - Mitsubishi Raider | V | - | 6 Cyl 3.7L | DuroCross | 226 |
- Front Rear Semi-Metallic Brake Pads Kit For Subaru Impreza Mitsubishi Lancer WR
- Positive Plus Front Rear Semi-Metallic Brake Pads Kit For Subaru Impreza Mitsubishi Lancer WRX STI BRZ Toyota 86 KPF-100011
- Positive Plus
- Product Attributes:
- WebNameEbay4: For Subaru Impreza Mitsubishi Lancer Wrx Front Rear Semi-metallic Brake Pads Kit
- ComponentsSummaryRegularWithBrands: 2x Positive Plus Brake Pad Set
- ComponentsSummaryShort: 2x Brake Pad
- ComponentsSummaryLongWithBrands: 1x Front Semi-metallic Positive Plus Brake Pad Set + 1x Rear Semi-metallic Positive Plus Brake Pad Set (hardware Included)
- WebNamePlain: Positive Plus Front Rear Semi-metallic Brake Pads Kit Kpf-100011
- ComponentsSummaryShortWithBrands: 2x Positive Plus Brake Pad
- NumberOfPieces: 2
- ComponentsSummaryLong: 1x Front Semi-metallic Brake Pad Set + 1x Rear Semi-metallic Brake Pad Set (hardware Included)
- WebNameLong: Positive Plus Front Rear Semi-metallic Brake Pads Kit For Subaru Impreza Mitsubishi Lancer Wrx Sti Brz Toyota 86 Kpf-100011
- WebNameShort: Front Rear Semi-metallic Brake Pads Kit For Subaru Impreza Mitsubishi Lancer Wrx Sti Brz Kpf-100011
- ComponentsSummaryRegular: 2x Brake Pad Set
- WebNameRegular: Positive Plus Front Rear Semi-metallic Brake Pads Kit For Subaru Impreza Mitsubishi Lancer Wrx Sti Brz Toyota 86 Kpf-100011
- WebNameEbay2: [front+rear] Semi-metallic Brake Pad Kit For Subaru Impreza Mitsubishi Lancer 86
- WebNameEbay3: Semi-metallic Brake Pads Front Rear Kit For Subaru Impreza Mitsubishi Lancer Wrx
- WebNameEbay: Front Rear Semi-metallic Brake Pads Kit For Subaru Impreza Mitsubishi Lancer Wrx
-
Features:
- Exclusive PowerGrip™ Semi-Metallic formula provides unmatched braking power (powerful friction, extreme temperature tolerance, aggressive initial bite) while maintaining low dust and noise
- Fiber-Reinforced Multi-Layer Shim with a rubber core minimize noise, vibration, and harshness for complete quietness
- Engineered with High Carbon SteelRX™ alloy (Pressure Resistant, Thermal Conductive) and dipped in an Anti-Rust Black Paint to improve durability
- Scorched for almost no break-in process required, raised initial cold effectiveness, and enhanced Pad-to-Rotor contact
- Chamfered for mooth and gradual initial engagement on the rotor surface to prevent edge shifting
- One-Piece Integral Molding Technology improves the durability of the pads and extends the service life
- Manufactured in ISO-certified facilities and 100% asbestos free
- Premium Stainless-Steel hardware included (when required by the application)
- Kit Includes: 1x Front Semi-Metallic Brake Pad Set + 1x Rear Semi-Metallic Brake Pad Set (Hardware Included)
- Part Reference Numbers : 1001A 1050B D1001A D1050B 7902 7942 7953 8526 8967 8968 9065 9078 7919 SG7953M SS7919M SS7953M SS8526M UP7902M UP7919M UP7953M UP8526M D1001 1001 7859 PF7859M SS7859M AD7859 UP7859M D961 961
- PPF offers the utilmate semi-metallic brake pads on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by PPF certified engineers.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
1001, 1001A, 1050B, 7859, 7902, 7919, 7942, 7953, 8526, 8967, 8968, 9065, 9078, 961, AD7859, D1001, D1001A, D1050B...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2006 - Mitsubishi Lancer | Front and Rear | Evolution MR |
Showing 1 - 10 of 23 products
Loading...