Image
Product
Price
- Front Rear Semi-Metallic Brake Pads Kit For Jeep Patriot Mitsubishi Lancer Dodg
- Positive Plus Front Rear Semi-Metallic Brake Pads Kit For Jeep Patriot Mitsubishi Lancer Dodge Compass Chrysler Caliber Sebring 200 Avenger KPF-100398
- Positive Plus
- Product Attributes:
- WebNameEbay4: For Jeep Patriot Mitsubishi Lancer Dodge Front Rear Semi-metallic Brake Pads Kit
- ComponentsSummaryRegularWithBrands: 2x Positive Plus Brake Pad Set
- ComponentsSummaryShort: 2x Brake Pad
- ComponentsSummaryLongWithBrands: 1x Front Semi-metallic Positive Plus Brake Pad Set (hardware Included) + 1x Rear Semi-metallic Positive Plus Brake Pad Set (hardware Included)
- WebNamePlain: Positive Plus Front Rear Semi-metallic Brake Pads Kit Kpf-100398
- ComponentsSummaryShortWithBrands: 2x Positive Plus Brake Pad
- NumberOfPieces: 2
- ComponentsSummaryLong: 1x Front Semi-metallic Brake Pad Set (hardware Included) + 1x Rear Semi-metallic Brake Pad Set (hardware Included)
- WebNameLong: Positive Plus Front Rear Semi-metallic Brake Pads Kit For Jeep Patriot Mitsubishi Lancer Dodge Compass Chrysler Caliber Sebring 200 Avenger Kpf-100398
- WebNameShort: Front Rear Semi-metallic Brake Pads Kit For Jeep Patriot Mitsubishi Lancer Dodge Compass Kpf-100398
- ComponentsSummaryRegular: 2x Brake Pad Set
- WebNameRegular: Positive Plus Front Rear Semi-metallic Brake Pads Kit For Jeep Patriot Mitsubishi Lancer Dodge Compass Chrysler Caliber Sebring 200 Avenger Kpf-100398
- WebNameEbay2: [front+rear] Semi-metallic Brake Pads Kit For Jeep Patriot Mitsubishi Lancer 200
- WebNameEbay3: Semi-metallic Brake Pads Front Rear Kit For Jeep Patriot Mitsubishi Lancer Dodge
- WebNameEbay: Front Rear Semi-metallic Brake Pads Kit For Jeep Patriot Mitsubishi Lancer Dodge
-
Features:
- Exclusive PowerGrip™ Semi-Metallic formula provides unmatched braking power (powerful friction, extreme temperature tolerance, aggressive initial bite) while maintaining low dust and noise
- Fiber-Reinforced Multi-Layer Shim with a rubber core minimize noise, vibration, and harshness for complete quietness
- Engineered with High Carbon SteelRX™ alloy (Pressure Resistant, Thermal Conductive) and dipped in an Anti-Rust Black Paint to improve durability
- Precise laser-cut channel cut provides superior thermal stability and prevent overheating
- Scorched for almost no break-in process required, raised initial cold effectiveness, and enhanced Pad-to-Rotor contact
- Chamfered for mooth and gradual initial engagement on the rotor surface to prevent edge shifting
- One-Piece Integral Molding Technology improves the durability of the pads and extends the service life
- Premium Stainless-Steel hardware included (when required by the application)
- Kit Includes: 1x Front Semi-Metallic Brake Pad Set (Hardware Included) + 1x Rear Semi-Metallic Brake Pad Set (Hardware Included)
- Part Reference Numbers : 8338 8402 9290 7741 SG7741X PF9290X AD7741 AD9290 PF7741M PF7741X QE7741X SS7741X SS9290X D866 866 7940 SG7940X PF7940X AD7940 QE7940X SS7940X D1037 1037
- PPF offers the utilmate semi-metallic brake pads on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by PPF certified engineers.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
1037, 7741, 7940, 8338, 8402, 866, 9290, AD7741, AD7940, D1037, D866, PF7741M, PF7741X, PF7940X, QE7741X, QE7940X, SS7741X, SS7940X...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2011 - Mitsubishi Lancer | Front and Rear | ES Sportback |
- Front Rear Semi-Metallic Brake Pads Kit For Jeep Mitsubishi Patriot Lancer 200
- Positive Plus Front Rear Semi-Metallic Brake Pads Kit For Jeep Mitsubishi Patriot Lancer Compass Outlander Chrysler Sebring 200 Dodge Avenger Sport RVR KPF-100401
- Positive Plus
- Product Attributes:
- WebNameEbay4: For Jeep Mitsubishi Patriot Lancer 200 Front Rear Semi-metallic Brake Pads Kit
- ComponentsSummaryRegularWithBrands: 2x Positive Plus Brake Pad Set
- ComponentsSummaryShort: 2x Brake Pad
- ComponentsSummaryLongWithBrands: 1x Front Semi-metallic Positive Plus Brake Pad Set (hardware Included) + 1x Rear Semi-metallic Positive Plus Brake Pad Set (hardware Included)
- WebNamePlain: Positive Plus Front Rear Semi-metallic Brake Pads Kit Kpf-100401
- ComponentsSummaryShortWithBrands: 2x Positive Plus Brake Pad
- NumberOfPieces: 2
- ComponentsSummaryLong: 1x Front Semi-metallic Brake Pad Set (hardware Included) + 1x Rear Semi-metallic Brake Pad Set (hardware Included)
- WebNameLong: Positive Plus Front Rear Semi-metallic Brake Pads Kit For Jeep Mitsubishi Patriot Lancer Compass Outlander Chrysler Sebring 200 Dodge Avenger Sport Rvr Kpf-100401
- WebNameShort: Front Rear Semi-metallic Brake Pad Kit For Jeep Mitsubishi Patriot Lancer Compass Sebring Kpf-100401
- ComponentsSummaryRegular: 2x Brake Pad Set
- WebNameRegular: Positive Plus Front Rear Semi-metallic Brake Pads Kit For Jeep Mitsubishi Patriot Lancer Compass Outlander Chrysler Sebring 200 Dodge Avenger Sport Rvr Kpf-100401
- WebNameEbay2: [front+rear] Semi-metallic Brake Pads Kit For Jeep Mitsubishi Patriot Lancer 200
- WebNameEbay3: Semi-metallic Brake Pads Front Rear Kit For Jeep Mitsubishi Patriot Lancer 200
- WebNameEbay: Front Rear Semi-metallic Brake Pads Kit For Jeep Mitsubishi Patriot Lancer 200
-
Features:
- Exclusive PowerGrip™ Semi-Metallic formula provides unmatched braking power (powerful friction, extreme temperature tolerance, aggressive initial bite) while maintaining low dust and noise
- Fiber-Reinforced Multi-Layer Shim with a rubber core minimize noise, vibration, and harshness for complete quietness
- Engineered with High Carbon SteelRX™ alloy (Pressure Resistant, Thermal Conductive) and dipped in an Anti-Rust Black Paint to improve durability
- Precise laser-cut channel cut provides superior thermal stability and prevent overheating
- Scorched for almost no break-in process required, raised initial cold effectiveness, and enhanced Pad-to-Rotor contact
- One-Piece Integral Molding Technology improves the durability of the pads and extends the service life
- Chamfered for mooth and gradual initial engagement on the rotor surface to prevent edge shifting
- Premium Stainless-Steel hardware included (when required by the application)
- Kit Includes: 1x Front Semi-Metallic Brake Pad Set (Hardware Included) + 1x Rear Semi-Metallic Brake Pad Set (Hardware Included)
- Part Reference Numbers : 8338 8402 9290 7741 SG7741X PF9290X AD7741 AD9290 PF7741M PF7741X QE7741X SS7741X SS9290X D866 866 7743 SG7743X PF7743X AD7743 QE7743X SS7743X UP7743X D868 868
- PPF offers the utilmate semi-metallic brake pads on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by PPF certified engineers.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
7741, 7743, 8338, 8402, 866, 868, 9290, AD7741, AD7743, D866, D868, PF7741M, PF7741X, PF7743X, QE7741X, QE7743X, SS7741X, SS7743X...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2011 - Mitsubishi Lancer | Front and Rear | GTS |
- Front Rear Semi-Metallic Brake Pads Kit For Mitsubishi Chrysler Sebring Eclipse
- Positive Plus Front Rear Semi-Metallic Brake Pads Kit For Mitsubishi Chrysler Sebring Eclipse Galant Dodge Stratus KPF-100400
- Positive Plus
- Product Attributes:
- WebNameEbay4: For Mitsubishi Chrysler Sebring Eclipse Front Rear Semi-metallic Brake Pads Kit
- ComponentsSummaryRegularWithBrands: 2x Positive Plus Brake Pad Set
- ComponentsSummaryShort: 2x Brake Pad
- ComponentsSummaryLongWithBrands: 1x Front Semi-metallic Positive Plus Brake Pad Set (hardware Included) + 1x Rear Semi-metallic Positive Plus Brake Pad Set
- WebNamePlain: Positive Plus Front Rear Semi-metallic Brake Pads Kit Kpf-100400
- ComponentsSummaryShortWithBrands: 2x Positive Plus Brake Pad
- NumberOfPieces: 2
- ComponentsSummaryLong: 1x Front Semi-metallic Brake Pad Set (hardware Included) + 1x Rear Semi-metallic Brake Pad Set
- WebNameLong: Positive Plus Front Rear Semi-metallic Brake Pads Kit For Mitsubishi Chrysler Sebring Eclipse Galant Dodge Stratus Kpf-100400
- WebNameShort: Front Rear Semi-metallic Brake Pads Kit For Mitsubishi Chrysler Sebring Eclipse Galant Kpf-100400
- ComponentsSummaryRegular: 2x Brake Pad Set
- WebNameRegular: Positive Plus Front Rear Semi-metallic Brake Pads Kit For Mitsubishi Chrysler Sebring Eclipse Galant Dodge Stratus Kpf-100400
- WebNameEbay2: [front+rear] Semi-metallic Brake Pad Kit For Mitsubishi Chrysler Sebring Eclipse
- WebNameEbay3: Semi-metallic Brake Pads Front Rear Kit For Mitsubishi Chrysler Sebring Eclipse
- WebNameEbay: Front Rear Semi-metallic Brake Pads Kit For Mitsubishi Chrysler Sebring Eclipse
-
Features:
- Exclusive PowerGrip™ Semi-Metallic formula provides unmatched braking power (powerful friction, extreme temperature tolerance, aggressive initial bite) while maintaining low dust and noise
- Fiber-Reinforced Multi-Layer Shim with a rubber core minimize noise, vibration, and harshness for complete quietness
- Engineered with High Carbon SteelRX™ alloy (Pressure Resistant, Thermal Conductive) and dipped in an Anti-Rust Black Paint to improve durability
- Precise laser-cut channel cut provides superior thermal stability and prevent overheating
- Scorched for almost no break-in process required, raised initial cold effectiveness, and enhanced Pad-to-Rotor contact
- One-Piece Integral Molding Technology improves the durability of the pads and extends the service life
- Chamfered for mooth and gradual initial engagement on the rotor surface to prevent edge shifting
- Manufactured in ISO-certified facilities and 100% asbestos free
- Kit Includes: 1x Front Semi-Metallic Brake Pad Set (Hardware Included) + 1x Rear Semi-Metallic Brake Pad Set
- Part Reference Numbers : 8338 8402 9290 7741 SG7741X PF9290X AD7741 AD9290 PF7741M PF7741X QE7741X SS7741X SS9290X D866 866 7272 SG7272X PF7272X AD7272 QE7272X SS7272X UP7272X D383 383
- PPF offers the utilmate semi-metallic brake pads on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by PPF certified engineers.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
383, 7272, 7741, 8338, 8402, 866, 9290, AD7272, AD7741, D383, D866, PF7272X, PF7741M, PF7741X, QE7272X, QE7741X, SS7272X, SS7741X...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Mitsubishi Galant | Front and Rear |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 216
- 8.5
- End 1 Inside Diameter:
- .28
- 7
- Material: Epdm
- End 2 Inside Diameter:
- .28
- 7
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10100, 12804553, 1349380J00, 14008S, 18100, 19506P2A000, 19526P5AA10, 63338, 64226, 86824, B86824, F2G813282A, F2G813681, G60913681, G60913682, K80213682, KB6KP13681, KL0113682A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2011 - Mitsubishi Eclipse | V | 3828 | Throttle Body Outlet | GAS | 6 Cyl 3.8L | 230 |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 216
- 8.5
- End 1 Inside Diameter:
- .28
- 7
- Material: Epdm
- End 2 Inside Diameter:
- .28
- 7
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2011 - Mitsubishi Eclipse | V | 3828 | Throttle Body Inlet | GAS | 6 Cyl 3.8L | 230 |
- Autolite AP3924 Platinum Spark Plug
- Gap .044 (in)
- Platinum Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.526
- 13.36
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.75
- 19.05
- Center Electrode Tip Material: Platinum
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.007
- 50.98
-
Features:
- Engineered with a platinum firing tip that prevents gap erosion for longer service life.
- Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- The multi-rib insulator prevents flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
- Autolite® Platinum spark plugs are engineered with a platinum center electrode firing tip that provides improved performance and increased durability, making it a reliable choice for all older engine applications and designs. Its platinum design delivers quicker firing, smoother starts, for better acceleration, and improved fuel efficiency.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
1148, 14 FGH-8 DPURX2, 14 FR-7 KPUV, 1W4312405AB, 2U7E12405BA, 3005, 3071, 3071S, 413F, 413FSM, 4202, 6111, 71, 8001, 8007, 9, AGSP32C, AGSP32F...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Mitsubishi Outlander | L | 2360 | 4 Cyl 2.4L | 144 |
- Autolite AP3923 Platinum Spark Plug
- Gap .044 (in)
- Platinum Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.399
- 10.13
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.75
- 19.05
- Center Electrode Tip Material: Platinum
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.007
- 50.98
-
Features:
- Engineered with a platinum firing tip that prevents gap erosion for longer service life.
- Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- The multi-rib insulator prevents flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
- Autolite® Platinum spark plugs are engineered with a platinum center electrode firing tip that provides improved performance and increased durability, making it a reliable choice for all older engine applications and designs. Its platinum design delivers quicker firing, smoother starts, for better acceleration, and improved fuel efficiency.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Mitsubishi RVR | L | 1998 | 4 Cyl 2.0L | 122 |
- Autolite AP3924 Platinum Spark Plug
- Gap .043 (in)
- Platinum Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.526
- 13.36
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.75
- 19.05
- Center Electrode Tip Material: Platinum
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.007
- 50.98
-
Features:
- Engineered with a platinum firing tip that prevents gap erosion for longer service life.
- Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- The multi-rib insulator prevents flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
- Autolite® Platinum spark plugs are engineered with a platinum center electrode firing tip that provides improved performance and increased durability, making it a reliable choice for all older engine applications and designs. Its platinum design delivers quicker firing, smoother starts, for better acceleration, and improved fuel efficiency.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2011 - Mitsubishi Lancer | L | 1999 | 4 Cyl 2.0L | Naturally Aspirated | 122 |
- Autolite AP3923 Platinum Spark Plug
- Gap .044 (in)
- Platinum Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.399
- 10.13
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.75
- 19.05
- Center Electrode Tip Material: Platinum
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.007
- 50.98
-
Features:
- Engineered with a platinum firing tip that prevents gap erosion for longer service life.
- Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- The multi-rib insulator prevents flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
- Autolite® Platinum spark plugs are engineered with a platinum center electrode firing tip that provides improved performance and increased durability, making it a reliable choice for all older engine applications and designs. Its platinum design delivers quicker firing, smoother starts, for better acceleration, and improved fuel efficiency.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
1257, 14 FGH-8 DPURX2, 14 FR-7 KPU, 14F-4DPU, 3007, 344, 3720, 4001, 5, 7002, 8002, 8013, 9195166, AGSP22C, BCP6EVX, BCPR6EVX-11, BKR5EVX-11, BKR6EGP...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Mitsubishi Eclipse | V | 3828 | 6 Cyl 3.8L | 230 |
- Standard Multi-Purpose Light Bulb Box of 10
- Boxed Product; Miniature Lamp
- Wagner Standard 17916 Standard Multi-Purpose Light Bulb Box of 10
- Product Attributes:
- Bulb Color: Clear
- Average Rated Life: 150
- Voltage: 12.000
- Wattage: 21.000
- Secondary Filament Type: C-6
- Amperage Rating: 1.750
- Secondary Average Rated Life: 1500
- Filament Type: C-6
- Secondary Voltage: 12.000
- Secondary Amperage Rating: 0.420
- Filament Quantity: 2
- Secondary Brightness: 1.200
- Secondary Wattage: 5.000
- Bulb Type: Miniature Lamp S-8
- Bulb Base Type: Bay15d
- Brightness: 35.000
-
Features:
- MULTIPURPOSE LIGHTING -- Designed for wide range of interior and exterior automotive lighting applications like turn signals, taillights, brake lights and cargo lights
- BUILT TO LAST -- Continuous coil filament resists shock and vibration and improves the life of the bulb
- HIGH QUALITY -- High-grade filament and natural amber glass (application-specific) for dependable long-lasting performance
- DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
- COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture and industrial, marine and powersport applications
- Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- This item must be purchased in quantities of 10
This Part Fits the Following OEM/Substitute Numbers:
12423401000, 12499, 12499B2, 129953, 13503342, 13503437, 13505767, 14144690, 153623, 17916, 182061, 1864421058L, 1A2847144100, 1A2847145000, 21019520, 2198000, 219800122, 264590...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Mitsubishi L200 | Rear |
Showing 1 - 10 of 24 products
Loading...