Image
Product
Price
- Performance Air Intake System
- Polished; Includes Air Filter/Tubing/Heat Shield; Estimated Horsepower Gain 10.3 HP At 4382 RPM;CARB E.O. D-269-100 77 Series - Metal Intake Kit For Truck or SUV; Polished
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Performance Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 8.000 In. (203mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 10.3 Hp @ 4382 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-1044
- Item Weight: 15.200 Lbs. (6.9 Kg)
- RPM: 4382
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 6.000 In. (152mm)
- Clamp Quantity: 5
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 10 Hp
- Intake Pipe Inlet Length: 14.000 In. (356mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 4.000 In. (102mm)
- Intake Pipe Outlet Length: 14.000 In. (356mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Intake Pipe Outlet Width: 4.000 In. (102mm)
-
Features:
- Guarantee To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Replaces Entire Factory Air Intake System
- Lasts Up To 100000 Miles Before Service Is Required
- Easy To Install Usually In 90 Minutes or Less
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2011 - Ram 1500 | V | - | 8 Cyl 5.7L | SLT | 345 |
- Performance Air Intake System
- Polished; Includes Air Filter/Tubing/Heat Shield; Estimated Horsepower Gain 10.3 HP At 4382 RPM;CARB E.O. D-269-100
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Performance Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 8.000 In. (203mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 10.3 Hp @ 4382 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-1044
- Item Weight: 15.200 Lbs. (6.9 Kg)
- RPM: 4382
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 6.000 In. (152mm)
- Clamp Quantity: 5
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 10 Hp
- Intake Pipe Inlet Length: 14.000 In. (356mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 4.000 In. (102mm)
- Intake Pipe Outlet Length: 14.000 In. (356mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Intake Pipe Outlet Width: 4.000 In. (102mm)
-
Features:
- Guarantee To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Replaces Entire Factory Air Intake System
- Lasts Up To 100000 Miles Before Service Is Required
- Easy To Install Usually In 90 Minutes or Less
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2011 - Ram 1500 | V | - | 8 Cyl 5.7L | SXT | 345 |
- Front Rear Semi-Metallic Brake Pad Kit For Ram 1500 Classic Dodge Chrysler Aspe
- Positive Plus Front Rear Semi-Metallic Brake Pads Kit For Ram 1500 Classic Dodge Chrysler Aspen Durango KPF-100045
- Positive Plus
- Product Attributes:
- WebNameEbay4: For Ram 1500 Classic Dodge Chrysler Aspen Front Rear Semi-metallic Brake Pad Kit
- ComponentsSummaryRegularWithBrands: 2x Positive Plus Brake Pad Set
- ComponentsSummaryShort: 2x Brake Pad
- ComponentsSummaryLongWithBrands: 1x Front Semi-metallic Positive Plus Brake Pad Set (hardware Included) + 1x Rear Semi-metallic Positive Plus Brake Pad Set (hardware Included)
- WebNamePlain: Positive Plus Front Rear Semi-metallic Brake Pads Kit Kpf-100045
- ComponentsSummaryShortWithBrands: 2x Positive Plus Brake Pad
- NumberOfPieces: 2
- ComponentsSummaryLong: 1x Front Semi-metallic Brake Pad Set (hardware Included) + 1x Rear Semi-metallic Brake Pad Set (hardware Included)
- WebNameLong: Positive Plus Front Rear Semi-metallic Brake Pads Kit For Ram 1500 Classic Dodge Chrysler Aspen Durango Kpf-100045
- WebNameShort: Front Rear Semi-metallic Brake Pads Kit For Ram 1500 Classic Dodge Chrysler Aspen Durango Kpf-100045
- ComponentsSummaryRegular: 2x Brake Pad Set
- WebNameRegular: Positive Plus Front Rear Semi-metallic Brake Pads Kit For Ram 1500 Classic Dodge Chrysler Aspen Durango Kpf-100045
- WebNameEbay2: [front+rear] Semi-metallic Brake Pads Kit For Ram 1500 Classic Dodge Chrysler
- WebNameEbay3: Semi-metallic Brake Pad Front Rear Kit For Ram 1500 Classic Dodge Chrysler Aspen
- WebNameEbay: Front Rear Semi-metallic Brake Pad Kit For Ram 1500 Classic Dodge Chrysler Aspen
-
Features:
- Exclusive PowerGrip™ Semi-Metallic formula provides unmatched braking power (powerful friction, extreme temperature tolerance, aggressive initial bite) while maintaining low dust and noise
- Fiber-Reinforced Multi-Layer Shim with a rubber core minimize noise, vibration, and harshness for complete quietness
- Engineered with High Carbon SteelRX™ alloy (Pressure Resistant, Thermal Conductive) and dipped in an Anti-Rust Black Paint to improve durability
- Precise laser-cut channel cut provides superior thermal stability and prevent overheating
- Scorched for almost no break-in process required, raised initial cold effectiveness, and enhanced Pad-to-Rotor contact
- Chamfered for mooth and gradual initial engagement on the rotor surface to prevent edge shifting
- One-Piece Integral Molding Technology improves the durability of the pads and extends the service life
- Premium Stainless-Steel hardware included (when required by the application)
- Kit Includes: 1x Front Semi-Metallic Brake Pad Set (Hardware Included) + 1x Rear Semi-Metallic Brake Pad Set (Hardware Included)
- Part Reference Numbers : 7991 SG7991M PF7991M AD7991 FT7991 QE7991M SS7991M D1084 1084 967A D967A 7867 7869 SG7867M PF7867M AD7867 FT7867 QE7867M SS7867M UP7867X D967 967
- PPF offers the utilmate semi-metallic brake pads on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by PPF certified engineers.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
1084, 7867, 7869, 7991, 967, 967A, AD7867, AD7991, D1084, D967, D967A, FT7867, FT7991, PF7867M, PF7991M, QE7867M, QE7991M, SS7867M...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Ram 1500 | Front and Rear |
- Warrior Roll Bar Kit
- Black Steel Box1-roof basket: dimensions: 52.95 X 50.39 X 8.85inch Gross Weight : 65.69 pounds W/ Set of 9" Black Round LED Light
-
Features:
- Warrior Roll Bar Kit WRB-001BK-PL69B by Black Horse Off Road - Patent Approved
- 3 - year manufacturer's limited warranty / Will not fit if hard or soft tonneau covers installed
- This Warrior Roll Bar is made from Black powder coat finish high-grade materials to adds structural strength to your truck and protect you and your passengers in the event of a roll over
- Free Shipping / Designed to carry loads up to 400 lbs.
- Extends along bed rail for extra tie-down points
- 3 inch diameter Mild Steel Cold-Rolled Tubing
- Rust resistant powder-coated top-coat with an E-coat undercoat / Bolt-on, no drill installation
- Comes with Set of 9" Inch Black round LED Lights
- Light brackets designed to hold lights up to 50" in length (LED Bar) / Includes rear brake light
- Quick release mechanism to remove and install basket / Includes step-by-step installation instructions and mounting hardware
- Black Horse Off Road Warrior Roll Bar Kit Black Steel Box1-roof basket: dimensions: 52.95 X 50.39 X 8.85inch Gross Weight : 65.69 pounds W/ Set of 9" Black Round LED Light Needs Slight modification for Trucks equipped with Factory Rail System
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2011 - Ram 2500 | ST |
- Warrior Roll Bar Kit
- Black Steel Box1-roof basket: dimensions: 52.95 X 50.39 X 8.85inch Gross Weight : 65.69 pounds Includes 2 pairs of 7.0"Diameter LED Lights with Black Trim Rings with Wiring Harness and Switch
-
Features:
- Warrior Roll Bar Kit WRB-001BK-PLB by Black Horse Off Road - Patent Approved
- This Warrior Roll Bar is made from Black powder coat finish high-grade materials to adds structural strength to your truck and protect you and your passengers in the event of a roll over
- Free Shipping / Designed to carry loads up to 400 lbs.
- Extends along bed rail for extra tie-down points
- Rust resistant powder-coated top-coat with an E-coat undercoat / Bolt-on, no drill installation
- Light brackets designed to hold lights up to 50" in length (LED Bar) / Includes rear brake light
- Quick release mechanism to remove and install basket / Includes step-by-step installation instructions and mounting hardware
- 3 - year manufacturer's limited warranty / Will not fit if hard or soft tonneau covers installed
- Includes 4x 7 Round Auxiliary LED Lights and wiring harnesses and black trim ring
- Black Horse Off Road Warrior Roll Bar Kit Black Steel Box1-roof basket: dimensions: 52.95 X 50.39 X 8.85inch Gross Weight : 65.69 pounds Includes 2 pairs of 7.0"Diameter LED Lights with Black Trim Rings with Wiring Harness and Switch Needs Slight modification for Trucks equipped with Factory Rail System
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2011 - Ram 3500 | ST |
- Classic Roll Bar Kit
- Black Steel Includes 2 pairs of 7.0"Diameter LED Lights with Black Trim Rings with Wiring Harness and Switch
-
Features:
- Classic Roll Bar Kit RB001BK-PLB by Black Horse Off Road - Patent Approved
- This Classic Roll Bar is made from Black powder-coated 4 Inch steel round tubes
- Includes Third Brake Light Built in with Wiring
- Fabricated with OEM-grade precision and materials that meet or exceed the highest quality standards.
- The patented designs and attention to detail, ensures a long lasting and trouble-free service life.
- Auxiliary headlights can be mounted above the cab roofline and add heavy duty tie-down points along with the rugged styling to complement the off-road functionality and recreational activities
- Comes with Installation Instructions and Mounting Hardware
- Drilling on side tail lips of truck bed is required for installation
- Requires an additional Bracket for Tonneau Cover Compatibility
- Black Horse Off Road Classic Roll Bar Kit Black Steel Includes 2 pairs of 7.0"Diameter LED Lights with Black Trim Rings with Wiring Harness and Switch Not Compatible with Tonneau Cover
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2011 - Ram 1500 | Laramie Longhorn |
- Greaseable with 1 Piece Rear Drive Shaft 1 Piece Driveshaft 1.062in Bearing Cap Diameter with 3.219in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Greaseable: Y
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Grease Fitting Location: One Lube Fitting In Bearing
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1-0153, 1-0153G, 1-0154, 1-0200, 1-0278, 15-153X, 2-0785, 269, 280, 329, 369, 379, 380, 45U0107, 45U0111, 45U0121, 45U0145, 45U0150...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2011 - Ram Dakota | Front Driveshaft at Front Axle | 4WD |
- Performance Air Intake System
- Polished; Includes Air Filter/Tubing/Heat Shield; Estimated Horsepower Gain 6.8 HP At 4743 RPM;CARB E.O. D-269-54
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Performance Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 8.000 In. (203mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 6.8 Hp @ 4743 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Rc-5106
- Item Weight: 14.100 Lbs. (6.4 Kg)
- RPM: 4743
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 3.000 In. (76mm)
- Clamp Quantity: 4
- Air Filter Large End Diameter: 6.000 In. (152mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 3.000 In. (76mm)
- Horse Power Increase: 7 Hp
- Intake Pipe Inlet Length: 27.000 In. (686mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.000 In. (76mm)
- Intake Pipe Outlet Length: 27.000 In. (686mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
- Intake Pipe Outlet Width: 3.000 In. (76mm)
-
Features:
- Guarantee To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Replaces Entire Factory Air Intake System
- Lasts Up To 100000 Miles Before Service Is Required
- Easy To Install Usually In 90 Minutes or Less
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2011 - Ram 1500 | V | - | 8 Cyl 4.7L | ST | 287 |
- Front Rear Semi-Metallic Brake Pads Kit For Ram 3500 2500 1500 Dodge KPF-100157
- Positive Plus Front Rear Semi-Metallic Brake Pads Kit For Ram 3500 2500 1500 Dodge KPF-100157
- Positive Plus
- Product Attributes:
- WebNameEbay4: For Ram 3500 2500 1500 Dodge Front Rear Semi-metallic Brake Pads Kit
- ComponentsSummaryRegularWithBrands: 2x Positive Plus Brake Pad Set
- ComponentsSummaryShort: 2x Brake Pad
- ComponentsSummaryLongWithBrands: 1x Front Semi-metallic Positive Plus Brake Pad Set (hardware Included) + 1x Rear Semi-metallic Positive Plus Brake Pad Set (hardware Included)
- WebNamePlain: Positive Plus Front Rear Semi-metallic Brake Pads Kit Kpf-100157
- ComponentsSummaryShortWithBrands: 2x Positive Plus Brake Pad
- NumberOfPieces: 2
- ComponentsSummaryLong: 1x Front Semi-metallic Brake Pad Set (hardware Included) + 1x Rear Semi-metallic Brake Pad Set (hardware Included)
- WebNameLong: Positive Plus Front Rear Semi-metallic Brake Pads Kit For Ram 3500 2500 1500 Dodge Kpf-100157
- WebNameShort: Front Rear Semi-metallic Brake Pads Kit For Ram 3500 2500 1500 Dodge Kpf-100157
- ComponentsSummaryRegular: 2x Brake Pad Set
- WebNameRegular: Positive Plus Front Rear Semi-metallic Brake Pads Kit For Ram 3500 2500 1500 Dodge Kpf-100157
- WebNameEbay2: [front+rear] Semi-metallic Brake Pads Kit For Ram 3500 2500 1500 Dodge
- WebNameEbay3: Semi-metallic Brake Pads Front Rear Kit For Ram 3500 2500 1500 Dodge
- WebNameEbay: Front Rear Semi-metallic Brake Pads Kit For Ram 3500 2500 1500 Dodge Kpf-100157
-
Features:
- Exclusive PowerGrip™ Semi-Metallic formula provides unmatched braking power (powerful friction, extreme temperature tolerance, aggressive initial bite) while maintaining low dust and noise
- Fiber-Reinforced Multi-Layer Shim with a rubber core minimize noise, vibration, and harshness for complete quietness
- Engineered with High Carbon SteelRX™ alloy (Pressure Resistant, Thermal Conductive) and dipped in an Anti-Rust Black Paint to improve durability
- Precise laser-cut channel cut provides superior thermal stability and prevent overheating
- Scorched for almost no break-in process required, raised initial cold effectiveness, and enhanced Pad-to-Rotor contact
- Chamfered for mooth and gradual initial engagement on the rotor surface to prevent edge shifting
- One-Piece Integral Molding Technology improves the durability of the pads and extends the service life
- Premium Stainless-Steel hardware included (when required by the application)
- Kit Includes: 1x Front Semi-Metallic Brake Pad Set (Hardware Included) + 1x Rear Semi-Metallic Brake Pad Set (Hardware Included)
- Part Reference Numbers : 8507 SG8507M PF8507M FT8507 FT8507F QE8507M SS8507M UP8507M D1399 1399 8508 SG8508M PF8508M FT8508 FT8508F QE8508M SS8508M UP8508M D1400 1400
- PPF offers the utilmate semi-metallic brake pads on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by PPF certified engineers.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
1399, 1400, 8507, 8508, D1399, D1400, FT8507, FT8507F, FT8508, FT8508F, PF8507M, PF8508M, QE8507M, QE8508M, SS8507M, SS8508M, UP8507M, UP8508M...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Ram 3500 | Front and Rear |
- Rear Adjustable Track Bar
- Whiteline Rear Adjustable Track Bar
- Rear Panhard Rod - Adjustable
- Product Attributes:
- Adjustable: Yes
- Grade Type: Performance
- Mounting Hardware Included: No
-
Features:
- Engineered to alter/ optimise lateral location of the axle as a result of lifting or lowering a vehicle.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Heavy duty adjustable panhard rod for serious 4x4 enthusiasts. Suitable for raised vehicles to reset axle location and wheel alignment rectification. Low compliance bushings are used to minimise NVH and maximise longevity. Note: Off car adjustable.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2011 - Ram 1500 | Rear | Outdoorsman |
Showing 1 - 10 of 41 products
Loading...