Image
Product
Price
- WIX Fuel Cartridge (Special Type) Filter
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 0.700
- Duty Type: Ld
- Micron: 26.00
- Style: Fuel Cartridge (special Type)
- Media Material: Cellulose
- Outer Diameter Bottom: 0.700
- Class: B
- Inner Diameter Bottom: 0.205
- WIX Fuel Filters provide excellent engine protection for normal and severe driving conditions such as dirt roads, construction sites, stop and go traffic, short trips, and interstate travel. WIX filters are recommended for OEM fuel filter change intervals. WIX offers high quality, high efficiency media specific to the application and fuel type being used. Superior materials, design and construction ensure WIX fuel filters provide excellent performance under all types of operating conditions.
This Part Fits the Following OEM/Substitute Numbers:
1137200, 1313924, 2224655, 23051, 3051, 33051, 3388, 3I1181, 45151, 506, 52056, 5651802, 5651809, 5651922, 61633051, 73051, 73337, 7457203...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1982 - American Motors Eagle | L | - | United States | 4 Cyl 2.5L | 151 |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 9-11 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 290
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: None
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0410824, 0FE00371, 1502008, 1522, 166, 1717114, 19210285, 2059, 21522, 25010276, 25014377, 25014748, 2522, 31522, 3240511, 3242397, 3423, 41522...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1982 - American Motors Concord | L | - | Canada | 6 Cyl 4.2L | 258 |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 325
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: None
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 079, 0 451 103 097, 0 451 103 204, 0 451 103 242, 0 451 103 242-30N, 0 986 AF0 057, 0410796, 0418063, 0418152, 0418173, 0650401, 0986627587, 0986TF0050, 0FE00199, 10-03-398, 100-OS, 1001691, 1040...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1982 - American Motors Eagle | L | - | Canada | 4 Cyl 2.5L | 151 |
- Autolite 666 Copper Resistor Spark Plug
- OE Style; Replaces 664 and 665 .060"/1.5mm
- Copper Resistor Spark Plug
- Product Attributes:
- Center Electrode Design: Standard / Regular
- Seat Type: Tapered
- Electrical Terminal Type: Stud
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Resistor Type: Yes
- Insulator Material: Ceramic
- Hex Size: 5/8"
- Reach:
- 0.433
- 11.0
- Center Electrode Tip Material: Nickel
- Ground Electrode Tip Design: Tapered
- Insulator Type: Mid Projection
- Pre-Gap Size:
- 0.060
- 1.50
- Resistance: 4000
- Ground Electrode Core Material: Nickel
- Autolite® Copper Spark Plugs are manufactured to deliver quick starts, improved fuel economy and smooth acceleration. Autolite® spark plugs are the best alternative to OE spark plugs, offering OE form, fit and function for all makes and models, both foreign and domestic, at a value price. Autolite provides the automotive aftermarket and Original Equipment manufacturers with the highest quality ignition products and is the leading supplier of spark plugs.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
17, 2096, 5021, ARF32-6, HS5E, R43CTS6
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1982 - American Motors Spirit | L | - | 4 Cyl 2.5L | 151 |
- Greaseable Premium Universal Joint
- with 4 Outside Lock Rings with Lube Fitting in Body Premium with Lube Fitting in Body
- MOOG Greaseable Premium 369 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.62
- 91.9
- Length Axis 2:
- 3.218
- 81.7
- Length A - Inch: 3.62
- OE Series: Spicer 1310
- Length A - mm: 91.9
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.218
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE -- Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN -- Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR -- Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE -- Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1982 - American Motors Concord | At Transmission |
- Greaseable Premium Universal Joint
- with Lube Fitting in Body Premium with Lube Fitting in Body
- MOOG Greaseable Premium 369 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.62
- 91.9
- Length Axis 2:
- 3.218
- 81.7
- Length A - Inch: 3.62
- OE Series: Spicer 1310
- Length A - mm: 91.9
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.218
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE -- Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN -- Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR -- Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE -- Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
1-0153, 1-1153, 10153, 114-3HD, 114-3HP, 114-513, 114-513R, 114-513X, 114-521HD, 153, 15617322, 20049, 20208, 20335, 210-0153, 212-0153, 215-0153, 26015249...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1982 - American Motors Spirit | At Rear Axle |
- Greaseable Premium Universal Joint
- with Lube Fitting in Body Premium with Lube Fitting in Body
- MOOG Greaseable Premium 369 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.62
- 91.9
- Length Axis 2:
- 3.218
- 81.7
- Length A - Inch: 3.62
- OE Series: Spicer 1310
- Length A - mm: 91.9
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.218
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE -- Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN -- Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR -- Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE -- Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1982 - American Motors Eagle | Rear Driveshaft at Rear Axle | Base |
- Greaseable Premium Universal Joint
- with Lube Fitting in Body Premium with Lube Fitting in Body
- MOOG Greaseable Premium 369 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.62
- 91.9
- Length Axis 2:
- 3.218
- 81.7
- Length A - Inch: 3.62
- OE Series: Spicer 1310
- Length A - mm: 91.9
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.218
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE -- Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN -- Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR -- Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE -- Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1982 - American Motors Eagle | Front Driveshaft at Front Axle | Kammback |
- Greaseable Premium Universal Joint
- with Lube Fitting in Body Premium with Lube Fitting in Body
- MOOG Greaseable Premium 369 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.62
- 91.9
- Length Axis 2:
- 3.218
- 81.7
- Length A - Inch: 3.62
- OE Series: Spicer 1310
- Length A - mm: 91.9
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.218
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE -- Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN -- Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR -- Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE -- Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1982 - American Motors Eagle | Front Driveshaft at Transfer Case | DL Kammback |
- Monro-Matic Plus Shock Absorber
- Monroe Shocks & Struts Monro-Matic Plus 33049 Shock Absorber
- Monroe Monro-Matic Plus Shock Absorber
- Monro-Matic Plus® shock absorbers are nitrogen gas charged and feature velocity sensitive valving and all weather fluid, which offers passenger cars improved comfort at an economical price.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
343135, 343136, 343149, 4851001010, 4851012460, 4851012461, 4851012520, 4851012590, 4851012650, 4851012651, 4851012660, 4851012661, 4851012720, 4851016190, 4851016230, 4851016240, 4851016250, 4851112310...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1982 - American Motors Eagle | Rear |
Showing 1 - 10 of 24 products
Loading...