Image
Product
Price
- Keyed Alike Locking Fuel Cap
- Vented Black Cap Includes 1 cap, same key. Multiples available
- Keyed Alike
- Product Attributes:
- Freight Class: 85
- Shell Diameter (in): 2.938
- Fuel Cap Venting: Emission Control
- Tethercluded: No
- Locking: Yes
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
17591, 9MGC233KA, MGC233KA
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 1988 - Mazda B2600 | L | 2555 | 4 Cyl 2.6L | 4WD | 156 |
- PRO-TEC Spin-On Lube Filter
- Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.69
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 9-11 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Outlet: 0.00
- Burst Pressure: 363
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Media Material: Cellulose
- Anti-Drain Back Valve: Yes
- Inlet: 0.00
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
This Part Fits the Following OEM/Substitute Numbers:
1356, 1357, 164, 1717156, 21356, 21356MP, 31356, 5001200182, 51356, 51356XP, 51357, 61356, 61356BP, 618-51356, 618-51356MP, 8-51356, 84356HD, 85356...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 1988 - Mazda RX-7 | R | 1308 | United States | 2 Cyl 1.3L | Turbocharged | - |
- Champion Copper Plus- Boxed - RC9MC4
- Gap 0.044in OE Type ; Plug Type RC9MC4
- Champion Copper Plus 434 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Classification: Champion Copper Plus
- Resistor Type: Yes
- Plug Type: Rc9mc4
- Hex Size:
- 0.625
- 15.880
- Reach: 0.75
- Center Electrode Tip Material: Nickel
- Manufacturer Heat Range: 9
- Pre-Gap Size:
- 0.045
- 1.14
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.12
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
56027108, RC9MC4, ZFR6VG
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Mazda MX-6 | L | 2184 | 4 Cyl 2.2L | - |
- Champion Copper Plus- Boxed - RC9MC4
- Gap 0.044in OE Type ; Plug Type RC9MC4
- Champion Copper Plus 434 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Classification: Champion Copper Plus
- Resistor Type: Yes
- Plug Type: Rc9mc4
- Hex Size:
- 0.625
- 15.880
- Reach: 0.75
- Center Electrode Tip Material: Nickel
- Manufacturer Heat Range: 9
- Pre-Gap Size:
- 0.045
- 1.14
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.12
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Mazda 929 | V | 2954 | 6 Cyl 3.0L | 180 |
- Ductile Casting; 225mm; 22T/24.3mm Spline Clamp Load: 1574 lbs.~Clutch Torque: 304 ft./lbs.~Torque At Flywheel: 242ft./lbs.~Torque Capacity At Wheels: 196 ft./lbs.
- Stage 1 Organic Clutch Kit; Ductile Casting; 225mm; 22T/24.3mm Spline;
- Stage 1 Organic Clutch Kit
-
Features:
- Clutch Cover Has Clamp Load 40 Perc. Above Genuine
- Organic Disc Has High Heat Resistant Properties
- Disc Has High Strength Copper Weave Fibers
- Disc Provides Superior Half-Engagement Feeling
- Ideal For Street/Circuit Or Drifting
- SFI Certified
- Drivability Is Similar To Stock Clutch
- Sprung Center Dampers To Reduce Drive Train Shock
- EXEDY Stage 1 Organic Racing Clutches only use premium friction materials that are resistant to slippage and burst. Increased clamp loads give the necessary capacity to handle modified engines. This is the ideal clutch for street and light horsepower track use. Drivability is similar to the stock clutch. Pedal efforts will be slightly higher because of the higher clamp loads. All of our Stage 1 clutch discs have spring center dampers to reduce drivetrain shock and provide smooth clutch engagement.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|
| 1988 - Mazda RX-7 | R | 1308 | 2 Cyl 1.3L | GXL | Naturally Aspirated | - |
- Ductile Casting; 225mm; 22T/24.3mm Spline Clamp Load: 1574 lbs.~Clutch Torque: 304 ft./lbs.~Torque At Flywheel: 242ft./lbs.~Torque Capacity At Wheels: 196 ft./lbs.
- Stage 1 Organic Clutch Kit; Ductile Casting; 225mm; 22T/24.3mm Spline;
- Stage 1 Organic Clutch Kit
-
Features:
- Clutch Cover Has Clamp Load 40 Perc. Above Genuine
- Organic Disc Has High Heat Resistant Properties
- Disc Has High Strength Copper Weave Fibers
- Disc Provides Superior Half-Engagement Feeling
- Ideal For Street/Circuit Or Drifting
- SFI Certified
- Drivability Is Similar To Stock Clutch
- Sprung Center Dampers To Reduce Drive Train Shock
- EXEDY Stage 1 Organic Racing Clutches only use premium friction materials that are resistant to slippage and burst. Increased clamp loads give the necessary capacity to handle modified engines. This is the ideal clutch for street and light horsepower track use. Drivability is similar to the stock clutch. Pedal efforts will be slightly higher because of the higher clamp loads. All of our Stage 1 clutch discs have spring center dampers to reduce drivetrain shock and provide smooth clutch engagement.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|
| 1988 - Mazda RX-7 | R | 1308 | 2 Cyl 1.3L | GXL | Naturally Aspirated | - |
- Small Standard Mini Lamp
- OE Type; Miniature Lamp - Boxed
- Wagner Standard 194 Light Bulb - Multi-Purpose (Box of 10)
- Product Attributes:
- Bulb Color: Clear
- Filament Type: C-2f
- Average Rated Life: 2500
- Voltage: 14.000
- Wattage: 3.780
- Length:
- 1.052
- 27.000
- Amperage Rating: 0.270
- Brightness: 2.000
- Bulb Base Type: Wedge
- Bulb Type: T-3 1/4 Bulb 13/32 (10mm) Dia
- Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
194, 34351-657-921, 90981-00194, 96942-4Z000, C2AZ13466C
Additional Fitment Information:
| Vehicle |
|---|
| 1988 - Mazda MX-6 |
- Small Standard Mini Lamp
- OE Type; Miniature Lamp - Boxed
- Wagner Standard 194 Light Bulb - Multi-Purpose (Box of 10)
- Product Attributes:
- Bulb Color: Clear
- Filament Type: C-2f
- Average Rated Life: 2500
- Voltage: 14.000
- Wattage: 3.780
- Length:
- 1.052
- 27.000
- Amperage Rating: 0.270
- Brightness: 2.000
- Bulb Base Type: Wedge
- Bulb Type: T-3 1/4 Bulb 13/32 (10mm) Dia
- Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Mazda RX-7 | Rear |
- Front Floor Mats
- Black; 2 piece
- HD FRONT FLOOR MATS
- Heavy Duty Floor Mat
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Style: Molded
-
Features:
- Guaranteed Not To Crack Or Break
- 0.3750 in. High Ridges
- Up To 40 percent Taller Ridges
- Extra Thick Driver Heal Pad
- Nibs On Back-Prevent Slippage
- Easily Cleaned
- Made In USA
- Year Round Protection
- Available for virtually all of today's top selling vehicles, Husky Liners Heavy Duty Floor Mats are made ultra tough to take whatever abuse you throw at them. Other mats have met their match.
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 1988 - Mazda B2200 | Front | Extended Cab Pickup |
- Front Floor Mats
- Black; 2 piece
- HD FRONT FLOOR MATS
- Heavy Duty Floor Mat
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Style: Molded
-
Features:
- Guaranteed Not To Crack Or Break
- 0.3750 in. High Ridges
- Up To 40 percent Taller Ridges
- Extra Thick Driver Heal Pad
- Nibs On Back-Prevent Slippage
- Easily Cleaned
- Made In USA
- Year Round Protection
- Available for virtually all of today's top selling vehicles, Husky Liners Heavy Duty Floor Mats are made ultra tough to take whatever abuse you throw at them. Other mats have met their match.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Mazda 929 | Front |
Showing 1 - 10 of 31 products
Loading...