Image
Product
Price
- Fuel Cap
- Non-Vented Black Cap
- Standard
- Product Attributes:
- Vented: No
- Lockable: No
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10352662, 10372246, 1078-290314, 10841, 10848, 11841, 12F64, 15225005, 15832215, 20852988, 20852993, 20882859, 20914961, 20915842, 25820825, 25827335, 31843, 31852...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Hummer H3T | L | 3654 | GAS | 5 Cyl 3.7L | 223 |
- Fuel Cap
- Non-Vented Yellow Cap for Flex Fuel Applications
- Standard
- Product Attributes:
- Vented: No
- Lockable: No
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
1078-290317, 10841Y, 11841Y, 12F66, 22802285, 31843Y, 40840, 6841, 703-1783, 9MGC841, G6841Y, GT295, MGC841, P6841
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Hummer H3T | V | 5328 | FLEX | 8 Cyl 5.3L | 325 |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 10-12 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 350
- BetaRatio: 2/20=6/20
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0410832, 0410852, 04884900AB, 04892339AA, 04892339BA, 05047769AA, 0FE00301, 0FE00317, 10-00-010, 1048, 107725, 115, 12626224, 12669842, 1502020, 16510-78J00, 16510-78J01, 19167894...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Hummer H3T | V | 5328 | Canada | 8 Cyl 5.3L | 325 |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 9-11 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 290
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: None
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0410824, 0FE00371, 1502008, 1522, 166, 1717114, 19210285, 2059, 21522, 25010276, 25014377, 25014748, 2522, 31522, 3240511, 3242397, 3423, 41522...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Hummer H3T | L | 3654 | Canada | 5 Cyl 3.7L | 223 |
- PRO-TEC Air Filter Panel
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Duty Type: Ld
- Length: 12.310
- Style: Air Filter Panel
- Media Material: Synthetic
- Class: C
- Protec Air Filters provide good engine protection for everyday normal driving conditions throughout a traditional air filter change interval. These filters are designed to match the OES in media area. Air filter Laboratory Tests per ISO 5011: 97.5% minimum efficiency (Based on PRO-TEC 362)
This Part Fits the Following OEM/Substitute Numbers:
29429, 482, 49429, 5000248839, 619-49429, 69429, 83429, 9-49429, 9429, A3095, A3095C, A55822, A5822, AF1397, AF3095, AF5822, CA10466, CAP10466...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Hummer H3T | V | 5328 | United States | 8 Cyl 5.3L | 325 |
- Champion Copper Plus- Boxed - RS12YC
- Gap 0.040in; Plug Type RS12YC
- Champion Copper Plus 401 Spark Plug (Carton of 6)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.625
- 15.880
- Reach: 0.689
- Center Electrode Tip Material: Nickel
- Seat Type: Tapered
- Electrical Terminal Type: Removable Nut
- Pre-Gap Size:
- 0.040
- 1.02
- Classification: Champion Copper Plus
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.06
- Resistor Type: Yes
- Plug Type: Rs12yc
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 10
- Most jobs typically require 10 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
3851857, 3854399, 3856759, 4318134, 7970, 7978, 7979, AGRF32, AGRF42, AGSF32C, AWRF42, AWSF32, AWSF32C, AWSF42, AWSF42C, AWSF52, AWSF52C, AWSFA32C...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Hummer H3T | V | 5328 | 8 Cyl 5.3L | 325 |
- Tethered Fuel Cap
- Non-Vented Black Cap
- Tethered
- Product Attributes:
- Vented: No
- Lockable: No
- Tethered: Yes
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10841T, 10848T, 290417, 6840T, 703-1897, 9MGC840T, MGC840T
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Hummer H3 | L | 3654 | GAS | 5 Cyl 3.7L | 223 |
- Locking Fuel Cap
- Non-Vented Black Cap
- Locking
- Product Attributes:
- Vented: No
- Lockable: Yes
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10511, 10518, 10523, 1078-290972, 11511, 12F40L, 31844, 31855, 31860, 40903, 5903, 703-1724, 9MGC903, GT264, MGC903, MGC903SK, P5903
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Hummer H3T | V | 5328 | GAS | 8 Cyl 5.3L | 325 |
- Locking Fuel Cap
- Non-Vented Yellow Cap
- Locking
- Product Attributes:
- Vented: No
- Lockable: Yes
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10511Y, 1078-290973, 11511Y, 12F41L, 31844Y, 40904, 5904, 703-1772, 9MGC904, MGC904, P5904
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Hummer H3T | V | 5328 | FLEX | 8 Cyl 5.3L | 325 |
- Greaseable Premium Universal Joint
- Premium
- MOOG Greaseable Premium 445 U-joint
- Product Attributes:
- Bearing Cap Type: 2 Grooved And 2 Plain Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.22
- 81.7
- Length Axis 2:
- 2.344
- 59.5
- Length A - Inch: 3.22
- OE Series: Combination 368 X 369
- Length A - mm: 81.7
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 2 Grooved And 2 Plain Round Bearings
- Image: Ujoint_2grooved_2plain.tif
- Length B - Inch: 2.344
- Length B - mm: 59.5
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 27.0
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- GREASABLE DESIGN -- Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
1-0350, 1-0445, 20184, 210-0350, 26008858, 26021107, 350, 45U0131, 5-350X, G5-350X, U445N
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Hummer H3T | Front Driveshaft at Front Axle |
Showing 1 - 10 of 16 products
Loading...