Select a vehicle to find exact fit parts

Shop By Product Matching "MagnaFlow Performance Exhaust"

Choose a Make for your 1980 vehicle

Alfa Romeo American Motors Audi BMW Bentley Buick Cadillac Chevrolet Chrysler Dodge Ferrari Fiat Ford GMC Honda Jaguar Jeep Lincoln Lotus MG Maserati Mazda Mercedes-Benz Mercury Nissan Oldsmobile Peugeot Plymouth Pontiac Porsche Renault Rolls-Royce Saab Subaru Toyota Volkswagen Volvo

Showing 1 - 10 of 130 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1980 Ford Bronco Catalytic Converter 8 Cyl 5.0L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.25in.
Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1980 - Ford Bronco	V	-	8 Cyl 5.0L	302


Brand	MagnaFlow Performance Exhaust
Part #	94005
Condition	New
Warehouse	C

UPC: 841380012340

1980 Dodge Aspen Catalytic Converter - Rear 8 Cyl 5.2L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.25in.
Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1980 - Dodge Aspen	V	5211	Rear	8 Cyl 5.2L	318


Brand	MagnaFlow Performance Exhaust
Part #	94005
Condition	New
Warehouse	C

UPC: 841380012340

1980 Oldsmobile Custom Cruiser Catalytic Converter 8 Cyl 5.7L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.25in.
Universal Fit Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Fuel Type	Engine	CID
1980 - Oldsmobile Custom Cruiser	V	-	GAS	8 Cyl 5.7L	350


Brand	MagnaFlow Performance Exhaust
Part #	94005
Condition	New
Warehouse	C

UPC: 841380012340

1980 Ford F-250 Catalytic Converter 8 Cyl 5.0L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.25in.
with Federal Emissions System Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1980 - Ford F-250	V	-	8 Cyl 5.0L	302


Brand	MagnaFlow Performance Exhaust
Part #	94005
Condition	New
Warehouse	C

UPC: 841380012340

1980 Oldsmobile Cutlass Supreme Catalytic Converter 8 Cyl 4.3L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.25in.
without Air Tube Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1980 - Oldsmobile Cutlass Supreme	V	-	8 Cyl 4.3L	260


Brand	MagnaFlow Performance Exhaust
Part #	94005
Condition	New
Warehouse	C

UPC: 841380012340

1980 Ford F-150 Catalytic Converter - Rear 6 Cyl 4.9L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.25in.
with California Emissions System Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1980 - Ford F-150	L	4917	Rear	6 Cyl 4.9L	300


Brand	MagnaFlow Performance Exhaust
Part #	94005
Condition	New
Warehouse	C

UPC: 841380012340

1980 Chevrolet Corvette Catalytic Converter 8 Cyl 5.7L MagnaFlow Performance Exhaust

Standard Grade Direct-Fit Catalytic Converter
Magnaflow Standard Grade Direct-Fit Catalytic Converter
Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Air Tube Count: 1
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: Yes
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 0
- Air Tube Adaptable: Yes
- California Air Resources Board (CARB) Certified: No
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93426 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1976-1981 Chevrolet Corvette and 1977-1979 Chevrolet Camaro. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1980 - Chevrolet Corvette	V	-	8 Cyl 5.7L	350


Brand	MagnaFlow Performance Exhaust
Part #	93426
Condition	New
Warehouse	C

UPC: 841380011701

1980 Chevrolet Malibu Catalytic Converter 6 Cyl 3.8L MagnaFlow Performance Exhaust

Standard Grade Direct-Fit Catalytic Converter
Magnaflow Standard Grade Direct-Fit Catalytic Converter
Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Air Tube Count: 1
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: Yes
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 0
- Air Tube Adaptable: Yes
- California Air Resources Board (CARB) Certified: No
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93418 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1978-1983 Chevrolet Malibu, 1978-1983 Chevrolet El Camino, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Engine VIN	CID
1980 - Chevrolet Malibu	V	3800	6 Cyl 3.8L	A	231


Brand	MagnaFlow Performance Exhaust
Part #	93418
Condition	New
Warehouse	C

UPC: 841380011695

1980 Dodge Ramcharger Catalytic Converter 8 Cyl 5.2L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.50in.
Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.50in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.5
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1980 - Dodge Ramcharger	V	5211	8 Cyl 5.2L	318


Brand	MagnaFlow Performance Exhaust
Part #	94006
Condition	New
Warehouse	C

UPC: 841380012357

1980 Pontiac Catalina Catalytic Converter 6 Cyl 3.8L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.50in.
Universal Fit Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.50in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.5
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.