Select a vehicle to find exact fit parts

Back to vehicles list

Shop By Product Matching "MagnaFlow Performance Exhaust"

Choose a Model for your 1993 Mazda

323 626 929 B2200 B2600 MPV MX-3 MX-6 Miata Navajo Protege RX-7

Showing 1 - 10 of 22 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1993 Mazda RX-7 Catalytic Converter - Rear 2 Cyl 1.3L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.00in.
Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 3
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94004 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1993 - Mazda RX-7	R	1308	Rear	2 Cyl 1.3L	-


Brand	MagnaFlow Performance Exhaust
Part #	94004
Condition	New
Warehouse	C

UPC: 841380012333

1993 Mazda RX-7 Catalytic Converter 2 Cyl 1.3L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.00in.
Cutting and Welding Required Main and Pre-Converter
Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 1
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6.375
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: Yes
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 3
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 93514 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1993 - Mazda RX-7	R	1308	2 Cyl 1.3L	-


Brand	MagnaFlow Performance Exhaust
Part #	93514
Condition	New
Warehouse	C

UPC: 841380011961

1993 Mazda MPV Catalytic Converter 4 Cyl 2.6L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.25in.
Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 91005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1993 - Mazda MPV	L	2606	4 Cyl 2.6L	-


Brand	MagnaFlow Performance Exhaust
Part #	91005
Condition	New
Warehouse	C

UPC: 841380011107

1993 Mazda 626 Catalytic Converter 4 Cyl 2.0L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.25in.
with Federal Emissions System Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 91005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Transmission	Engine	CID
1993 - Mazda 626	L	1991	Manual	4 Cyl 2.0L	-


Brand	MagnaFlow Performance Exhaust
Part #	91005
Condition	New
Warehouse	C

UPC: 841380011107

1993 Mazda Navajo Catalytic Converter 6 Cyl 4.0L MagnaFlow Performance Exhaust

Standard Grade Direct-Fit Catalytic Converter
Magnaflow Standard Grade Direct-Fit Catalytic Converter
Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 0
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23388 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1989-1994 Ford Ranger, 1991-1994 Ford Explorer, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1993 - Mazda Navajo	V	-	6 Cyl 4.0L	245


Brand	MagnaFlow Performance Exhaust
Part #	23388
Condition	New
Warehouse	C

UPC: 841380007797

1993 Mazda B2200 Catalytic Converter - Rear 4 Cyl 2.2L MagnaFlow Performance Exhaust

Standard Grade Direct-Fit Catalytic Converter
Magnaflow Standard Grade Direct-Fit Catalytic Converter
Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: No
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 4
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22757. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1987-1993 Mazda B2200, 1983-1986 Nissan 720, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Fuel Delivery Type	CID
1993 - Mazda B2200	L	2184	Rear	4 Cyl 2.2L	CARB	-


Brand	MagnaFlow Performance Exhaust
Part #	22757
Condition	New
Warehouse	C

UPC: 841380006363

1993 Mazda MX-3 Catalytic Converter 6 Cyl 1.8L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.00in.
Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53004 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1993 - Mazda MX-3	V	1845	6 Cyl 1.8L	-


Brand	MagnaFlow Performance Exhaust
Part #	53004
Condition	New
Warehouse	C

UPC: 841380010827

1993 Mazda Protege Catalytic Converter 4 Cyl 1.8L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.00in.
Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 91004 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1993 - Mazda Protege	L	1839	4 Cyl 1.8L	-


Brand	MagnaFlow Performance Exhaust
Part #	91004
Condition	New
Warehouse	C

UPC: 841380011091

1993 Mazda B2200 Catalytic Converter - Rear 4 Cyl 2.2L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.00in.
Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53004 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Fuel Delivery Type	CID
1993 - Mazda B2200	L	2184	Rear	4 Cyl 2.2L	CARB	-


Brand	MagnaFlow Performance Exhaust
Part #	53004
Condition	New
Warehouse	C

UPC: 841380010827

1993 Mazda Protege Catalytic Converter 4 Cyl 1.8L MagnaFlow Performance Exhaust

HM Grade Direct-Fit Catalytic Converter
Magnaflow HM Grade Direct-Fit Catalytic Converter
Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Grade Type: Regular
- Hangers Included: Yes
- Heat Shield Attached: Yes
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 0
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23685 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1992-1994 Mazda Protege, 1991-1996 Ford Escort, and more, this direct-fit catalytic converter also interchanges with OE part F5CZ-5E212-AA. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.