Shop By Product Matching "MagnaFlow Performance Exhaust"


Showing 1 - 10 of 20 products
Image
SKU
Product
Rating
Price

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 3.00in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 3.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 5.5
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 3
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Outlet Inside Diameter: 3
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94009 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Engine Drive Type CID
1995 - GMC Safari V - 6 Cyl 4.3L AWD 262

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 3.00in.
  • Under 15000 (lb) Gross Vehicle Weight (GVW) Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 3.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 5.5
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 3
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Outlet Inside Diameter: 3
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94009 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Engine CID
1995 - GMC K3500 V - 8 Cyl 5.7L 350

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 3.00in.
  • Under 9000 (lb) Gross Vehicle Weight (GVW) Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 3.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 5.5
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 3
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Outlet Inside Diameter: 3
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94009 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Engine CID
1995 - GMC G3500 V - 6 Cyl 4.3L 262

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.50in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.50in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 5.5
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2.5
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Outlet Inside Diameter: 2.5
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Engine CID
1995 - GMC Jimmy V - 6 Cyl 4.3L 262

MagnaFlow Performance Exhaust
  • California Universal Catalytic Converter - 2.50in.
  • CARB Executive Order D-193-100 Engine Family Number (EFN) S3G4.329GFGJ Cutting and Welding Required
  • Magnaflow California Universal Catalytic Converter - 2.50in.
  • 2.50in. Universal California Compliant OBDII Catalytic Converter
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 6.375
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: Yes
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: D-193-100
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2.5
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Outlet Inside Diameter: 2.5
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 445006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Additional Fitment Information:
Vehicle Block CC Engine CID
1995 - GMC Sonoma V - 6 Cyl 4.3L 262

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 3.00in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 3.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 6.5
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 3
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Outlet Inside Diameter: 3
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 95509 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Engine CID
1995 - GMC G3500 V - 8 Cyl 7.4L 454

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 3.00in.
  • Under 15000 (lb) Gross Vehicle Weight (GVW) Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 3.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 6.5
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 3
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Outlet Inside Diameter: 3
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 95509 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Engine CID
1995 - GMC P3500 V - 8 Cyl 7.4L 454

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.00in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 6.375
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Oxygen Sensor Location: Pre Converter
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 2
    • Outlet Inside Diameter: 3
    • Sensor Port Count: 1
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94047 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Doors Engine CID
1995 - GMC Yukon V - 4 8 Cyl 5.7L 350

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 3.00in.
  • Under 9000 (lb) Gross Vehicle Weight (GVW) Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 3.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 6.375
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 3
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Outlet Inside Diameter: 3
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 93509 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Engine CID
1995 - GMC G3500 V - 8 Cyl 5.7L 350

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.00in.
  • Under 8500 (lb) Gross Vehicle Weight (GVW) Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 6.375
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Oxygen Sensor Location: Pre Converter
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 2
    • Outlet Inside Diameter: 3
    • Sensor Port Count: 1
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94047 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Engine Wheel FeedBase CID
1995 - GMC K2500 V - 8 Cyl 5.7L 131.5 350
Showing 1 - 10 of 20 products

Loading...