Image
Product
Price
- Dual Same Side Behind Passenger Rear Tire Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Length: 7.25
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Straight Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Dual Same Side Behind Passenger Rear Tire
- Muffler Body Width: 11
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Rectangle
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 3 X 3.75
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow 2003-2009 Toyota 4Runner Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.0L, 4.7L 2003-2009 Toyota 4Runner with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Behind Passenger Rear Tire exit with 3 x 3.75in. Polished Welded-On Double Wall Straight Cut Rolled Edge tips, this Toyota 4Runner exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota 4Runner's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15781 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15781 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Toyota 4Runner | V | 3956 | 6 Cyl 4.0L | 241 |
- Single Passenger Side Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Cut Edge
- Exhaust Tip Quantity: 1
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Single Passenger Side Rear
- Muffler Body Width: 11
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 3.5
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow 2000-2006 Toyota Tundra Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.4L, 4.7L 2000-2006 Toyota Tundra with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 3.5in. Polished Welded-On Single Wall Angle Cut Cut Edge tips, this Toyota Tundra exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tundra's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15809 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15809 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2003 - Toyota Tundra | V | 4663 | 8 Cyl 4.7L | 76.5 | Extended Cab Pickup | 285 |
- Single Straight Driver Side Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 1
- Muffler (Rear) Body Height: 5
- Muffler (Front) Body Height: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Clamps Included: Yes
- Exhaust Tip Length: 7.25
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Muffler (Front) Body Width: 4
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Single Straight Driver Side Rear
- Main Piping Diameter: 2.25
- Clamping Type: Band Clamp;u-bolt Clamp
- Exhaust Tip Resonated: Yes
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Muffler (Rear) Body Length: 18
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow Street Series Cat-Back Performance Exhaust System 15759 brings out the personality of your Car with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Single Straight Driver Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Car exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Car's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15759 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15759 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2003 - Toyota Matrix | L | 1795 | 4 Cyl 1.8L | FWD | - |
- HM Grade Manifold Catalytic Converter
- Magnaflow HM Grade Manifold Catalytic Converter
- Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Gasket Included: Yes
- Outlet Gasket Included: Yes
- Grade Type: Regular
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: Yes
- CARB Executive Order Number: Not Applicable
- Inlet Mounting Hardware Included: No
- Substrate Material: Ceramic
- Clamps Included: No
- Converter Tube Material: Stainless Steel
- Converter Body Material: Stainless Steel
- Sensor Port Count: 1
- Converter Body Length: 6.25
- California Air Resources Board (CARB) Certified: No
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50741. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2003-2004 Toyota 4Runner and 2003-2005 Lexus GX470, this direct-fit catalytic converter also interchanges with OE parts 17104-50180 and 17105-50170. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
17104-50180, 1710450180, 17105-50170, 1710550170
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2003 - Toyota 4Runner | V | 4663 | Right | 8 Cyl 4.7L | 285 |
- HM Grade Manifold Catalytic Converter
- Magnaflow HM Grade Manifold Catalytic Converter
- Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Gasket Included: Yes
- Outlet Gasket Included: Yes
- Grade Type: Regular
- Outlet Mounting Hardware Included: Yes
- Heat Shield Attached: No
- CARB Executive Order Number: Not Applicable
- Inlet Mounting Hardware Included: No
- Substrate Material: Ceramic
- Clamps Included: No
- Converter Tube Material: Stainless Steel
- Converter Body Material: Stainless Steel
- Sensor Port Count: 1
- California Air Resources Board (CARB) Certified: No
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50740. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2003-2004 Toyota 4Runner and 2003-2005 Lexus GX470, this direct-fit catalytic converter also interchanges with OE parts 17104-50180 and 17105-50170. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
17104-50180, 1710450180, 17105-50170, 1710550170
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2003 - Toyota 4Runner | V | 4663 | Left | 8 Cyl 4.7L | 285 |
- Single Passenger Side Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Cut Edge
- Exhaust Tip Quantity: 1
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 14
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Single Passenger Side Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 3
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow 2000-2004 Toyota Tacoma Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.7L, 3.4L 2000-2004 Toyota Tacoma with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 3in. Polished Welded-On Single Wall Angle Cut Cut Edge tips, this Toyota Tacoma exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tacoma's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15811 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15811 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|
| 2003 - Toyota Tacoma | L | 2694 | 4 Cyl 2.7L | Pre Runner | Extended Cab Pickup | - |
- Single Straight Passenger Side Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 1
- Muffler (Rear) Body Height: 5
- Muffler (Front) Body Height: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Clamps Included: Yes
- Exhaust Tip Length: 3.25
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Muffler (Front) Body Width: 4
- Exhaust Tip Cut: Straight Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Single Straight Passenger Side Rear
- Main Piping Diameter: 2.25
- Clamping Type: Band Clamp;u-bolt Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler (Front) Body Length: 14
- Muffler Body Material: Stainless Steel
- Muffler (Rear) Body Length: 18
- Exhaust Tip Diameter: 3
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow 2003-2006 Toyota Corolla Street Series Cat-Back Performance Exhaust System brings out the personality of your 1.8L 2003-2006 Toyota Corolla with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 3in. Polished Welded-On Single Wall Straight Cut Rolled Edge tips, this Toyota Corolla exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Corolla's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15807 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15807 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Toyota Corolla | L | 1794 | 4 Cyl 1.8L | - |
- Single Passenger Side Rear Exit
- Magnaflow Overland Series Stainless Cat-Back System
- Overland Series Stainless Cat-Back System
- Product Attributes:
- Muffler (Left) Body Width: 11
- Exhaust Tip Quantity: 0
- Hangers Included: Yes
- Muffler (Left) Type: Straight-through
- Exit Style: Single Passenger Side Rear
- Muffler Quantity: 2
- Clamps Included: Yes
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Muffler (Left) Body Height: 5
- Muffler (Right) Body Height: 4
- Muffler Finish: Brushed
- Valve Included: No
- Muffler (Right) Body Width: 4
- Muffler (Right) Type: Tuned Chamber
- Muffler Body Material: Stainless Steel
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Muffler (Right) Body Length: 6
-
Features:
- No-Drone-Technology (NDT) allows for a quiet cabin
- Dyno proven performance
- High clearance exit
- The MagnaFlow Toyota 4Runner Overland Series Cat-Back Performance Exhaust System #19546 will enhance your 4.0L V6 Toyota 4Runner (2003-2023) with MagnaFlow’s renowned deep rumble and dyno-proven performance. MagnaFlow #19546 is weight optimized for additional utility and designed such that its mandrel bent 2.5” diameter main piping is situated more closely to the body than the stock configuration. This combined with a single high-clearance no-tip, passenger-side rear exhaust exit allows for significantly improved ground clearance and departure angles. MagnaFlow exhaust system #19546 is compatible with the most popular bolt-on aftermarket modifications and features our No Drone Technology, which cancels out the natural droning frequencies of the V6 Toyota 4Runner at cruising speeds. This allows for a quiet ride on the highway while retaining the character of your rig’s exhaust note. CNC precision robotic manufacturing enables perfect fitment and hassle-free bolt-on installation. The 100% stainless steel construction of exhaust kit #19546 is covered by MagnaFlow’s limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Toyota 4Runner | V | 3956 | 6 Cyl 4.0L | 241 |
- OEM Grade Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required without Pre-Converter
- Magnaflow OEM Grade Universal Catalytic Converter - 2.25in.
- Universal OEM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Toyota Solara | V | 2995 | 6 Cyl 3.0L | - |
- OEM Grade Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 2.25in.
- Universal OEM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Toyota Highlander | V | 2995 | 6 Cyl 3.0L | - |
Showing 1 - 10 of 30 products
Loading...