Shop By Product Matching "MagnaFlow Performance Exhaust"
Choose a Model for your 2009 Mazda
Image
Product
Price
- HM Grade Universal Catalytic Converter - 2.50in.
- Cutting and Welding Required
- Magnaflow HM Grade Universal Catalytic Converter - 2.50in.
- Universal HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: Midbed
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.5
- Sensor Port Count: 1
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99356HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Mazda RX-8 | R | 1308 | 2 Cyl 1.3L | - |
- HM Grade Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required
- Magnaflow HM Grade Universal Catalytic Converter - 2.25in.
- Universal HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: Midbed
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 1
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99355HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Mazda B2300 | L | - | Rear | 4 Cyl 2.3L | 140 |
- Dual Split Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Folded Edge
- Exhaust Tip Quantity: 2
- Muffler (Rear) Body Height: 5
- Muffler (Front) Body Height: 5
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Clamps Included: Yes
- Exhaust Tip Length: 7.5
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Muffler (Front) Body Width: 5
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Dual Split Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp;u-bolt Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler (Front) Body Length: 14
- Muffler Body Material: Stainless Steel
- Muffler (Rear) Body Length: 18
- Exhaust Tip Diameter: 3.5
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow 2006-2014 Mazda MX-5 Miata Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.0L 2006-2014 Mazda MX-5 Miata with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Mazda MX-5 Miata exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Mazda MX-5 Miata's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16668 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16668 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Mazda MX-5 Miata | L | 2000 | 4 Cyl 2.0L | 122 |
- Dual Split Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Cut Edge
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 18
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Length: 18
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Clamp-on
- Hangers Included: Yes
- Exit Style: Dual Split Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 3
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow Street Series Cat-Back Performance Exhaust System 15773 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck's to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15773 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15773 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Mazda B4000 | V | - | 6 Cyl 4.0L | 245 |
- Single Passenger Side Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Cut Edge
- Exhaust Tip Quantity: 1
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 18
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Single Passenger Side Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 3.5
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow Street Series Cat-Back Performance Exhaust System 15679 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 3.5in. Polished Welded-On Single Wall Angle Cut Cut Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15679 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15679 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Mazda B4000 | V | - | 6 Cyl 4.0L | 245 |
- Off Road Pro Series Gas Stainless Cat-Back
- Turn Down In Front of Rear Tire Exit
- Magnaflow Off Road Pro Series Gas Stainless Cat-Back
- Off-Road Pro Series Gas Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Cut Edge
- Exhaust Tip Quantity: 1
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 14
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Length: 11
- Exhaust Tip Intercooled: No
- Muffler Finish: Satin
- Valve Included: No
- Exhaust Tip Cut: Turndown
- Exhaust Tip Connection: Clamp-on
- Hangers Included: Yes
- Exit Style: Turndown In Front Of Rear Tire
- Muffler Body Width: 5
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 3
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Satin
-
Features:
- Available for gas or diesel trucks and SUV's
- 100% Stainless Steel
- High flow straight through design
- The MagnaFlow Off-Road Pro Series Cat-Back Performance Exhaust System 17114 brings additional off-roading prowess and our deep signature exhaust note to your Truck with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17114 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Truck exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17114's emissions-legal cat-back design replaces all your truck's exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17114 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow's limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Mazda B4000 | V | - | 6 Cyl 4.0L | 245 |
- Single Straight Driver Side Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 1
- Muffler (Rear) Body Height: 6
- Muffler (Front) Body Height: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Clamps Included: Yes
- Muffler (Rear) Body Width: 6
- Exhaust Tip Length: 7.25
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Muffler (Front) Body Width: 4
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Single Straight Driver Side Rear
- Main Piping Diameter: 2.25
- Clamping Type: Band Clamp;u-bolt Clamp
- Exhaust Tip Resonated: Yes
- Exhaust Tip Shape: Round
- Muffler (Front) Body Length: 14
- Muffler Body Material: Stainless Steel
- Muffler (Rear) Body Length: 14
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow 2007-2009 Mazda 3 Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.0L, 2.3L 2007-2009 Mazda 3 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Single Straight Driver Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Mazda 3 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Mazda 3's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16786 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16786 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Mazda 3 | L | 1999 | 4 Cyl 2.0L | 122 |
- OEM Grade Universal Catalytic Converter - 2.00in.
- Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 2.00in.
- Universal OEM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2
- Sensor Port Count: 0
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51204 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Mazda 3 | L | 1999 | 4 Cyl 2.0L | 122 |
- OEM Grade Universal Catalytic Converter - 2.00in.
- Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 2.00in.
- Universal OEM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2
- Sensor Port Count: 0
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51204 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Mazda 3 | L | 2260 | Rear | 4 Cyl 2.3L | - |
- OEM Grade Direct-Fit Catalytic Converter
- Magnaflow OEM Grade Direct-Fit Catalytic Converter
- Direct-Fit OEM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre Converter And Midbed
- Outlet Gasket Included: No
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 2
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49677 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2007-2011 Ford Ranger and 2007-2010 Mazda B4000, this direct-fit catalytic converter also interchanges with OE part 1FED-20-55X. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
1FAB-20-55X, 1FAD-20-55X, 1FED-20-55X, 1FED2055X, 7L5Z 5E212-C, 8L5Z 5E212-C, AL5Z 5E212-A
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Mazda B4000 | V | - | Left | 6 Cyl 4.0L | 245 |
Showing 1 - 10 of 12 products
Loading...