Select a vehicle to find exact fit parts

Back to vehicles list

Shop By Product Matching "MagnaFlow Performance Exhaust"

Choose a Model for your 2011 Lincoln

MKZ Navigator Town Car

Showing 1 - 9 of 9 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2011 Lincoln Town Car Catalytic Converter - Rear Right 8 Cyl 4.6L MagnaFlow Performance Exhaust

HM Grade Universal Catalytic Converter - 2.25in.
Cutting and Welding Required
Magnaflow HM Grade Universal Catalytic Converter - 2.25in.
Universal HM Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99205HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2011 - Lincoln Town Car	V	-	Rear Right	8 Cyl 4.6L	281


Brand	MagnaFlow Performance Exhaust
Part #	99205HM
Condition	New
Warehouse	C

UPC: 841380031433

2011 Lincoln Town Car Catalytic Converter - Rear Left 8 Cyl 4.6L MagnaFlow Performance Exhaust

HM Grade Universal Catalytic Converter - 2.25in.
Cutting and Welding Required
Magnaflow HM Grade Universal Catalytic Converter - 2.25in.
Universal HM Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99205HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2011 - Lincoln Town Car	V	-	Rear Left	8 Cyl 4.6L	281


Brand	MagnaFlow Performance Exhaust
Part #	99205HM
Condition	New
Warehouse	C

UPC: 841380031433

2011 Lincoln MKZ Catalytic Converter 4 Cyl 2.5L MagnaFlow Performance Exhaust

OEM Grade Universal Catalytic Converter - 2.25in.
Cutting and Welding Required
Magnaflow OEM Grade Universal Catalytic Converter - 2.25in.
Universal OEM Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2011 - Lincoln MKZ	L	2488	4 Cyl 2.5L	Hybrid	152


Brand	MagnaFlow Performance Exhaust
Part #	51205
Condition	New
Warehouse	C

UPC: 841380069252

2011 Lincoln Town Car Catalytic Converter - Rear Right 8 Cyl 4.6L MagnaFlow Performance Exhaust

OEM Grade Universal Catalytic Converter - 2.25in.
Cutting and Welding Required
Magnaflow OEM Grade Universal Catalytic Converter - 2.25in.
Universal OEM Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2011 - Lincoln Town Car	V	-	Rear Right	8 Cyl 4.6L	281


Brand	MagnaFlow Performance Exhaust
Part #	51205
Condition	New
Warehouse	C

UPC: 841380069252

2011 Lincoln Town Car Catalytic Converter - Rear Left 8 Cyl 4.6L MagnaFlow Performance Exhaust

OEM Grade Universal Catalytic Converter - 2.25in.
Cutting and Welding Required
Magnaflow OEM Grade Universal Catalytic Converter - 2.25in.
Universal OEM Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2011 - Lincoln Town Car	V	-	Rear Left	8 Cyl 4.6L	281


Brand	MagnaFlow Performance Exhaust
Part #	51205
Condition	New
Warehouse	C

UPC: 841380069252

2011 Lincoln Town Car Catalytic Converter - Right 8 Cyl 4.6L MagnaFlow Performance Exhaust

HM Grade Direct-Fit Catalytic Converter
Magnaflow HM Grade Direct-Fit Catalytic Converter
Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: Yes
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Inlet Mounting Hardware Included: Yes
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 2
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23332 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2003-2011 Ford Crown Victoria, 2003-2011 Mercury Grand Marquis, and more, this direct-fit catalytic converter also interchanges with OE part 3W7Z-5E212-AA. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

This Part Fits the Following OEM/Substitute Numbers:

3W1Z 5E212-FA, 3W1Z 5E212-GA, 3W7Z-5E212-AA, 5W1Z 5E212-BA, 6W1Z 5E212-A, 6W1Z 5E212-B, 6W1Z 5E212-D

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2011 - Lincoln Town Car	V	-	Right	8 Cyl 4.6L	281


Brand	MagnaFlow Performance Exhaust
Part #	23332
Condition	New
Warehouse	C

UPC: 841380020635

2011 Lincoln Town Car Catalytic Converter - Left 8 Cyl 4.6L MagnaFlow Performance Exhaust

HM Grade Direct-Fit Catalytic Converter
Magnaflow HM Grade Direct-Fit Catalytic Converter
Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Post Converter
- Outlet Gasket Included: Yes
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23331 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2003-2011 Ford Crown Victoria, 2003-2011 Mercury Grand Marquis, and more, this direct-fit catalytic converter also interchanges with OE part 3W1Z-5E212-GB. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

This Part Fits the Following OEM/Substitute Numbers:

3W1Z 5E212-FB, 3W1Z 5E212-GB, 3W1Z-5E212-GB, 5W1Z 5E212-BB, 5W1Z 5E212-CC, 6W1Z 5E212-E, 6W1Z 5E212-F, 6W1Z 5E212-H

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2011 - Lincoln Town Car	V	-	Left	8 Cyl 4.6L	281


Brand	MagnaFlow Performance Exhaust
Part #	23331
Condition	New
Warehouse	C

UPC: 841380020581

2011 Lincoln Navigator Catalytic Converter - Right 8 Cyl 5.4L MagnaFlow Performance Exhaust

OEM Grade Universal Catalytic Converter - 2.50in.
Cutting and Welding Required
Magnaflow OEM Grade Universal Catalytic Converter - 2.50in.
Universal OEM Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: Midbed
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.5
- Sensor Port Count: 1
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51356 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2011 - Lincoln Navigator	V	-	Right	8 Cyl 5.4L	330


Brand	MagnaFlow Performance Exhaust
Part #	51356
Condition	New
Warehouse	C

UPC: 841380065599

2011 Lincoln Navigator Catalytic Converter - Left 8 Cyl 5.4L MagnaFlow Performance Exhaust

OEM Grade Universal Catalytic Converter - 2.50in.
Cutting and Welding Required
Magnaflow OEM Grade Universal Catalytic Converter - 2.50in.
Universal OEM Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: Midbed
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.5
- Sensor Port Count: 1
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51356 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.