Image
Product
Price
- HM Grade Universal Catalytic Converter - 2.25in.
- Partial Zero Emissions Vehicle (PZEV) Cutting and Welding Required Not legal for sale or installation in California, Colorado or New York.
- Magnaflow HM Grade Universal Catalytic Converter - 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Hm Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 99205hm
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99205HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Mercedes-Benz C300 | V | 2996 | Rear Left | 6 Cyl 3.0L | 183 |
- HM Grade Universal Catalytic Converter - 2.25in.
- Partial Zero Emissions Vehicle (PZEV) Cutting and Welding Required Not legal for sale or installation in California, Colorado or New York.
- Magnaflow HM Grade Universal Catalytic Converter - 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Hm Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 99205hm
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99205HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Mercedes-Benz C300 | V | 2996 | Rear Right | 6 Cyl 3.0L | 183 |
- California Universal Catalytic Converter - 2.25in.
- CARB Executive Order D-193-141 Engine Family Number (EFN) AMBXV03.5U2A Cutting and Welding Required Legal For Sale In All 50 States Including California, Colorado and New York (CARB Certified)
- Magnaflow California Universal Catalytic Converter - 2.25in.
- 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4
- Body Height: 4
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- Body Length: 11.25
- California Air Resources Board (CARB) Certified: Yes
- Inlet Gasket Included: No
- Oxygen Sensor Location: Midbed
- Series: California
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: D-193-141
- Body Type: Spun
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 1
- Title: Magnaflow California Grade Carb Compliant Universal Catalytic Converter 5561355
-
Features:
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5561355. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Mercedes-Benz C300 | V | 2996 | Right | 6 Cyl 3.0L | - |
- California Universal Catalytic Converter - 2.25in.
- CARB Executive Order D-193-141 Engine Family Number (EFN) AMBXV03.5BN4 Engine Family Number (EFN) AMBXV03.5U2A Cutting and Welding Required Legal For Sale In All 50 States Including California, Colorado and New York (CARB Certified)
- Magnaflow California Universal Catalytic Converter - 2.25in.
- 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4
- Body Height: 4
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- Body Length: 11.25
- California Air Resources Board (CARB) Certified: Yes
- Inlet Gasket Included: No
- Oxygen Sensor Location: Midbed
- Series: California
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: D-193-141
- Body Type: Spun
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 1
- Title: Magnaflow California Grade Carb Compliant Universal Catalytic Converter 5561355
-
Features:
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5561355. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Mercedes-Benz SLK300 | V | 2996 | Left | 6 Cyl 3.0L | - |
- California Universal Catalytic Converter - 2.25in.
- CARB Executive Order D-193-141 Engine Family Number (EFN) AMBXJ05.5U2A Cutting and Welding Required Legal For Sale In All 50 States Including California, Colorado and New York (CARB Certified)
- Magnaflow California Universal Catalytic Converter - 2.25in.
- 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4
- Body Height: 4
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- Body Length: 11.25
- California Air Resources Board (CARB) Certified: Yes
- Inlet Gasket Included: No
- Oxygen Sensor Location: Midbed
- Series: California
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: D-193-141
- Body Type: Spun
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 1
- Title: Magnaflow California Grade Carb Compliant Universal Catalytic Converter 5561355
-
Features:
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5561355. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Mercedes-Benz CL550 | V | 5461 | Right | 8 Cyl 5.5L | 333 |
- California Universal Catalytic Converter - 2.25in.
- CARB Executive Order D-193-141 Engine Family Number (EFN) AMBXV03.5BN4 Cutting and Welding Required Legal For Sale In All 50 States Including California, Colorado and New York (CARB Certified)
- Magnaflow California Universal Catalytic Converter - 2.25in.
- 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4
- Body Height: 4
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- Body Length: 11.25
- California Air Resources Board (CARB) Certified: Yes
- Inlet Gasket Included: No
- Oxygen Sensor Location: Midbed
- Series: California
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: D-193-141
- Body Type: Spun
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 1
- Title: Magnaflow California Grade Carb Compliant Universal Catalytic Converter 5561355
-
Features:
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5561355. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Mercedes-Benz GLK350 | V | 3498 | Left | 6 Cyl 3.5L | - |
- California Universal Catalytic Converter - 2.25in.
- CARB Executive Order D-193-141 Engine Family Number (EFN) AMBXV03.5BN4 Cutting and Welding Required Legal For Sale In All 50 States Including California, Colorado and New York (CARB Certified)
- Magnaflow California Universal Catalytic Converter - 2.25in.
- 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4
- Body Height: 4
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- Body Length: 11.25
- California Air Resources Board (CARB) Certified: Yes
- Inlet Gasket Included: No
- Oxygen Sensor Location: Midbed
- Series: California
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: D-193-141
- Body Type: Spun
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 1
- Title: Magnaflow California Grade Carb Compliant Universal Catalytic Converter 5561355
-
Features:
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5561355. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Mercedes-Benz GLK350 | V | 3498 | Right | 6 Cyl 3.5L | - |
- California Universal Catalytic Converter - 2.25in.
- CARB Executive Order D-193-141 Engine Family Number (EFN) AMBXV03.5U2A Cutting and Welding Required Legal For Sale In All 50 States Including California, Colorado and New York (CARB Certified)
- Magnaflow California Universal Catalytic Converter - 2.25in.
- 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4
- Body Height: 4
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- Body Length: 11.25
- California Air Resources Board (CARB) Certified: Yes
- Inlet Gasket Included: No
- Oxygen Sensor Location: Midbed
- Series: California
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: D-193-141
- Body Type: Spun
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 1
- Title: Magnaflow California Grade Carb Compliant Universal Catalytic Converter 5561355
-
Features:
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5561355. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2010 - Mercedes-Benz C300 | V | 2996 | Left | 6 Cyl 3.0L | RWD | 183 |
- California Universal Catalytic Converter - 2.25in.
- CARB Executive Order D-193-141 Engine Family Number (EFN) AMBXV03.5BN4 Engine Family Number (EFN) AMBXV03.5U2A Cutting and Welding Required Legal For Sale In All 50 States Including California, Colorado and New York (CARB Certified)
- Magnaflow California Universal Catalytic Converter - 2.25in.
- 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4
- Body Height: 4
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- Body Length: 11.25
- California Air Resources Board (CARB) Certified: Yes
- Inlet Gasket Included: No
- Oxygen Sensor Location: Midbed
- Series: California
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: D-193-141
- Body Type: Spun
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 1
- Title: Magnaflow California Grade Carb Compliant Universal Catalytic Converter 5561355
-
Features:
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5561355. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Mercedes-Benz C350 | V | 3498 | Right | 6 Cyl 3.5L | - |
- California Universal Catalytic Converter - 2.25in.
- CARB Executive Order D-193-141 Engine Family Number (EFN) AMBXJ05.5U2A Cutting and Welding Required Legal For Sale In All 50 States Including California, Colorado and New York (CARB Certified)
- Magnaflow California Universal Catalytic Converter - 2.25in.
- 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4
- Body Height: 4
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- Body Length: 11.25
- California Air Resources Board (CARB) Certified: Yes
- Inlet Gasket Included: No
- Oxygen Sensor Location: Midbed
- Series: California
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: D-193-141
- Body Type: Spun
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 1
- Title: Magnaflow California Grade Carb Compliant Universal Catalytic Converter 5561355
-
Features:
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5561355. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Mercedes-Benz CL550 | V | 5461 | Left | 8 Cyl 5.5L | 333 |
Showing 1 - 10 of 43 products
Loading...