Image
Product
Price
- California Direct-Fit Catalytic Converter
- From 1/3/2012 CARB Executive Order D-193-144 Engine Family Number (EFN) CCRXD05.78V0 Engine Family Number (EFN) CCRXD05.78VY Legal For Sale In All 50 States Including California, Colorado and New York (CARB Certified)
- Magnaflow California Direct-Fit Catalytic Converter
- Product Attributes:
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: No
- Series: California
- Grade Type: Regular
- Outlet Mounting Hardware Included: No
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: D-193-144
- Inlet Mounting Hardware Included: No
- Substrate Material: Ceramic
- Finish:
- Stainless
- Stainless Steel
- Prop 65 Y/N: No
- Sensor Port Count: 5
- Title: Magnaflow 2012-2016 Ram 2500 California Grade Carb Compliant Direct-fit Catalytic Converter
- California Air Resources Board (CARB) Certified: Yes
-
Features:
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5551457. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed specifically for the 2012-2016 Ram 2500. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Body | CID |
|---|---|---|---|---|---|---|
| 2012 - Ram 2500 | V | - | GAS | 8 Cyl 5.7L | Standard Cab Pickup | 345 |
- Direct-Fit Muffler Replacement Kit With Muffler
- For Vehicles with Factory Dual Exhaust
- Magnaflow Direct-Fit Muffler Replacement Kit With Muffler
- With Muffler
- Product Attributes:
- Muffler Type: Straight-through
- Grade Type: Performance
- Muffler Quantity: 1
- Body Material: Stainless Steel
- Muffler 1 Body Height: 5
- Muffler Body Length: 18
- Clamps Included: Yes
- Muffler Body Height: 5
- Valve Included: No
- Type: With Muffler
- Heat Shield Attached: No
- Muffler 1 Body Length: 18
- Body Finish: Brushed
- Outlet Tip Quantity: 0
- Hanger Included: Yes
- Main Piping Diameter: 3
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Off Road Use Only: No
- Prop 65 Y/N: No
- Muffler Body Material: Stainless Steel
- Reversible: No
- Title: Magnaflow D-fit Performance Exhaust Muffler Replacement Kit With Muffler 19439
- Pipe Material: Stainless Steel
-
Features:
- Maintains the OEM piping and tailpipe
- Mandrel Bent Stainless Steel Tubing
- 409 Stainless Steel Construction
- Replace the restrictive factory muffler, while maintaining the OEM piping and tailpipe.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ram 1500 | V | - | 8 Cyl 5.7L | 345 |
- Direct-Fit Muffler Replacement Kit Without Muffler
- For Vehicles with Factory Dual Exhaust
- Magnaflow Direct-Fit Muffler Replacement Kit Without Muffler
- Without Muffler
- Product Attributes:
- Grade Type: Performance
- Heat Shield Attached: No
- Body Finish: Brushed
- Outlet Tip Quantity: 0
- Hanger Included: Yes
- Muffler Quantity: 0
- Body Material: Stainless Steel
- Clamps Included: Yes
- Main Piping Diameter: 3
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Valve Included: No
- Off Road Use Only: No
- Prop 65 Y/N: No
- Reversible: No
- Title: Magnaflow D-fit Performance Exhaust Muffler Replacement Kit Without Muffler 19440
- Pipe Material: Stainless Steel
- Type: Without Muffler
-
Features:
- Maintains the OEM piping and tailpipe
- Mandrel Bent Stainless Steel Tubing
- 409 Stainless Steel Construction
- The MagnaFlow D-Fit Performance Exhaust Muffler Replacement Kit Without Muffler 19440 19440 replaces the restrictive factory muffler of your Truck with fast-flowing mandrel bent 3in. tubing, while maintaining the OEM piping and tailpipe. Exhaust Muffler kit 19440 features a direct-fit, easy-to-install design and is produced using CNC precision robotic manufacturing techniques. This exhaust system's durable, corrosion resistant stainless steel construction is backed by MagnaFlow's limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ram 1500 | V | - | 8 Cyl 5.7L | 345 |
- PRO DPF Series Diesel 5in. Filter-Back
- Single Passenger Side Rear Exit
- MagnaFlow PRO DPF Series Diesel 5in. Filter-Back
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 1
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 0
- Clamps Included: Yes
- Exhaust Tip Length: 13
- Exhaust Tip Intercooled: Yes
- Valve Included: No
- Type: Filter-back
- Series: Magnaflow Pro Dpf
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Single Passenger Side Rear
- Main Piping Diameter: 5
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Prop 65 Y/N: No
- Title: Magnaflow Pro Series Filter-back Performance Exhaust System 17874
- Exhaust Tip Diameter: 6
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Throaty, powerful performance sound Magnaflow is famous for
- Attention grabbing design thanks to an aggressive style
- Intercooled tips
- The MagnaFlow Ram PRO DPF Series 17874 utilizes it's weight-optimized, durable, corrosion resistant stainless steel design to enhance your truck with MagnaFlow’s signature sound and dyno-tested performance. 17874’s 5in. diameter mandrel bent main piping features a muffler delete and terminates in a Single Passenger Side Rear exit with 6in. Polished Welded-Single Wall-Angle Cut-Rolled Edge-Intercooled tips. This emissions-legal filter-back exhaust kit has been tuned to create Mild interior and Moderate exterior sound levels. Exhaust system 17874 is emissions-legal and produced using CNC precision robotic manufacturing techniques that result in a direct-fit design that you can install yourself, all backed by MagnaFlow’s limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2012 - Ram 2500 | L | - | 6 Cyl 6.7L | Extended Crew Cab Pickup | 408 |
- Dual Split Rear Exit For Vehicles with Factory Dual Exhaust
- Magnaflow Street Series Black Cat-Back System
- Street Series Black Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Length: 13
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Dual Split Rear
- Muffler Body Width: 11
- Main Piping Diameter: 3
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 5
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Black Coated
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The Street Series Black Performance Exhaust system delivers dyno proven power with a comfortable interior sound and performance exterior sound. Features Black coated tips.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2012 - Ram 1500 | V | - | 8 Cyl 5.7L | 76.3 | Extended Cab Pickup | 345 |
- Direct-Fit Diesel Oxidation Catalyst
- Legal for sale and use in the state of Colorado per regulation number 20, effective 12/15/2023 Not Legal For Sale In California or New York.
- MagnaFlow Direct-Fit Diesel Oxidation Catalyst
- Product Attributes:
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: Yes
- Series: Oem Grade
- Grade Type: Regular
- Hangers Included: Yes
- Outlet Mounting Hardware Included: No
- Body Width: 6
- Body Height: 6
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Metallic
- Inlet Attachment: Clamp-on
- Outlet Quantity: 1
- Heat Shield Included: No
- Inlet Quantity: 1
- Outlet Attachment: Bolt-on
- Prop 65 Y/N: No
- Sensor Port Count: 1
- Converter Quantity: 1
- Title: Magnaflow Oem Grade Federal / Epa Compliant Diesel Oxidation Catalyst 60507
- Clamp Included: No
-
Features:
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 60507. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2007-2010 Dodge Ram 2500, 2007-2010 Dodge Ram 3500, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2012 - Ram 3500 | L | - | 6 Cyl 6.7L | Standard Cab Pickup | 408 |
- Direct-Fit Diesel Oxidation Catalyst
- Legal for sale and use in the state of Colorado per regulation number 20, effective 12/15/2023
- MagnaFlow Direct-Fit Diesel Oxidation Catalyst
- Direct-Fit OEM Grade DOC Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: Yes
- Grade Type: Regular
- Hangers Included: Yes
- Outlet Mounting Hardware Included: No
- Body Width: 6
- Body Height: 6
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Metallic
- Inlet Attachment: Clamp-on
- Outlet Quantity: 1
- Heat Shield Included: No
- Inlet Quantity: 1
- Outlet Attachment: Bolt-on
- Sensor Port Count: 1
- Converter Quantity: 1
- Clamp Included: No
-
Features:
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 60507. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2007-2010 Dodge Ram 2500, 2007-2010 Dodge Ram 3500, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2012 - Ram 3500 | L | - | 6 Cyl 6.7L | Extended Crew Cab Pickup | 408 |
- Direct-Fit Muffler Replacement Kit With Muffler
- For Vehicles with Factory Dual Exhaust
- Magnaflow Direct-Fit Muffler Replacement Kit With Muffler
- D-Fit Muffler Replacement Kit With Muffler
- Product Attributes:
- Muffler Type: Straight-through
- Grade Type: Performance
- Heat Shield Attached: No
- Muffler 1 Body Length: 18
- Body Finish: Brushed
- Outlet Tip Quantity: 0
- Hanger Included: Yes
- Muffler Quantity: 1
- Body Material: Stainless Steel
- Muffler 1 Body Height: 5
- Muffler Body Length: 18
- Clamps Included: Yes
- Main Piping Diameter: 3
- Clamping Type: Band Clamp
- Muffler Body Height: 5
- Valve Included: No
- Off Road Use Only: No
- Muffler Body Material: Stainless Steel
- Reversible: No
- Pipe Material: Stainless Steel
-
Features:
- 409 Stainless Steel Construction
- Mandrel Bent Stainless Steel Tubing
- Maintains the OEM piping and tailpipe
- Replace the restrictive factory muffler, while maintaining the OEM piping and tailpipe.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ram 1500 | V | - | 8 Cyl 5.7L | 345 |
- PRO DPF Series Diesel 5in. Filter-Back
- Single Passenger Side Rear Exit
- MagnaFlow PRO DPF Series Diesel 5in. Filter-Back
- MagnaFlow PRO DPF Series Diesel Filter-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Quantity: 1
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Single Passenger Side Rear
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 0
- Clamps Included: Yes
- Main Piping Diameter: 5
- Clamping Type: Band Clamp
- Exhaust Tip Intercooled: Yes
- Exhaust Tip Length: 13
- Exhaust Tip Resonated: No
- Valve Included: No
- Exhaust Tip Shape: Round
- Exhaust Tip Diameter: 6
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Throaty, powerful performance sound Magnaflow is famous for
- Attention grabbing design thanks to an aggressive style
- Intercooled tips
- The MagnaFlow Ram PRO DPF Series 17874 utilizes it's weight-optimized, durable, corrosion resistant stainless steel design to enhance your truck with MagnaFlow’s signature sound and dyno-tested performance. 17874’s 5in. diameter mandrel bent main piping features a muffler delete and terminates in a Single Passenger Side Rear exit with 6in. Polished Welded-Single Wall-Angle Cut-Rolled Edge-Intercooled tips. This emissions-legal filter-back exhaust kit has been tuned to create Mild interior and Moderate exterior sound levels. Exhaust system 17874 is emissions-legal and produced using CNC precision robotic manufacturing techniques that result in a direct-fit design that you can install yourself, all backed by MagnaFlow’s limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2012 - Ram 3500 | L | - | 6 Cyl 6.7L | Extended Crew Cab Pickup | 408 |
- Street Series Stainless Cat-Back System
- Dual Split Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Length: 18
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Type: Cat-back
- Series: Street
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Dual Split Rear
- Muffler Body Width: 11
- Main Piping Diameter: 3
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Prop 65 Y/N: No
- Muffler Body Material: Stainless Steel
- Title: Magnaflow Street Series Cat-back Performance Exhaust System 15249
- Exhaust Tip Diameter: 3.5
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Dyno-proven performance
- The MagnaFlow Street Series Cat-Back Performance Exhaust System 15249 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck's to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15249 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15249 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2012 - Ram 1500 | V | - | 6 Cyl 3.7L | 67.4 | Crew Cab Pickup | 226 |
Showing 1 - 10 of 25 products
Loading...