Image
Product
Price
- California Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-148 Engine Family Number (EFN) GGMXT06.2374 Cutting and Welding Required Legal For Sale In All 50 States Including California, Colorado and New York (CARB Certified)
- Magnaflow California Universal Catalytic Converter - 2.50in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6.375
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: Yes
- Inlet Gasket Included: No
- Series: California
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: D-193-148
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.5
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow California Grade Carb Compliant Universal Catalytic Converter 5592306
-
Features:
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5592306 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Cadillac Escalade | V | 6162 | Rear | 8 Cyl 6.2L | 376 |
- California Manifold Catalytic Converter
- CARB Executive Order D-193-148 Engine Family Number (EFN) GGMXJ03.6165 Legal For Sale In All 50 States Including California, Colorado and New York (CARB Certified)
- Magnaflow California Manifold Catalytic Converter
- Product Attributes:
- Inlet Gasket Included: Yes
- Outlet Gasket Included: Yes
- Series: California
- Grade Type: Regular
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: D-193-148
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: Yes
- Converter Tube Material: Stainless Steel
- Converter Body Material: Stainless Steel
- Prop 65 Y/N: No
- Sensor Port Count: 2
- Title: Magnaflow 2012-2016 Cadillac Srx California Grade Carb Compliant Manifold Catalytic Converter
- Converter Body Length: 9.25
- Type: Two-piece
- California Air Resources Board (CARB) Certified: Yes
-
Features:
- Torca AccuSeal® Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5582647. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2012-2016 Cadillac SRX. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2016 - Cadillac SRX | V | 3564 | Front | 6 Cyl 3.6L | FWD | 217 |
- OEM Grade Universal Catalytic Converter - 2.50in.
- with California Emissions System Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 2.50in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5
- Body Height: 5
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- Body Length: 8.75
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Oem Grade
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.5
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Oem Grade Federal / Epa Compliant Universal Catalytic Converter 51656
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51656. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Cadillac Escalade | V | 6162 | Front | 8 Cyl 6.2L | 376 |
- OEM Grade Universal Catalytic Converter - 2.50in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 2.50in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5
- Body Height: 5
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- Body Length: 8.75
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Oem Grade
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.5
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Oem Grade Federal / Epa Compliant Universal Catalytic Converter 51656
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51656. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Cadillac CT6 | V | - | Left | 6 Cyl 3.0L | 182 |
- OEM Grade Universal Catalytic Converter - 3.00in.
- Ultra Low Emission Vehicle (ULEV) Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 3.00in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Oem Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 3
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 3
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Oem Grade Federal / Epa Compliant Universal Catalytic Converter 51209
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51209 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Cadillac ATS | L | 2457 | Rear | 4 Cyl 2.5L | 150 |
- OEM Grade Universal Catalytic Converter - 2.25in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Oem Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Oem Grade Federal / Epa Compliant Universal Catalytic Converter 51205
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2016 - Cadillac XTS | V | 3564 | Rear | 6 Cyl 3.6L | FWD | Naturally Aspirated | 217 |
- OEM Grade Universal Catalytic Converter - 2.25in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Oem Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Oem Grade Federal / Epa Compliant Universal Catalytic Converter 51205
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Cadillac CTS | V | - | Rear | 6 Cyl 3.6L | 222 |
- OEM Grade Direct-Fit Catalytic Converter
- Ultra Low Emission Vehicle (ULEV) Not legal for sale or installation in California, Colorado or New York.
- Magnaflow OEM Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Post Converter
- Outlet Gasket Included: Yes
- Series: Oem Grade
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: Yes
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Mounting Hardware Included: Yes
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 1
- Air Tube Adaptable: No
- Title: Magnaflow 2013-2016 Cadillac Ats Oem Grade Federal / Epa Compliant Direct-fit Catalytic Converter
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52954. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2013-2016 Cadillac ATS and interchanges with OE parts 12671956 and 12653066, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
12653066, 12656407, 12659100, 12671956
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Cadillac ATS | L | 2457 | Front | 4 Cyl 2.5L | 150 |
- Street Series Stainless Axle-Back System
- Dual Split Rear Exit
- Magnaflow Street Series Stainless Axle-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 18
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Length: 7.25
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Type: Axle-back
- Series: Street
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Dual Split Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: Yes
- Exhaust Tip Shape: Round
- Prop 65 Y/N: No
- Muffler Body Material: Stainless Steel
- Title: Magnaflow 2013-2018 Cadillac Ats Street Series Axle-back Performance Exhaust System
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Dyno-proven performance
- The MagnaFlow 2013-2018 Cadillac ATS Street Series Axle-Back Performance Exhaust System brings enhanced engine sound and dyno-proven performance to your 3.6L 2013-2018 Cadillac ATS with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Cadillac ATS exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Cadillac ATS's exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15196 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2016 - Cadillac ATS | V | - | 6 Cyl 3.6L | Sedan | 222 |
- Dual Split Rear Exit
- Magnaflow Street Series Stainless Axle-Back System
- Street Series Stainless Axle-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 18
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Length: 7.25
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Dual Split Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: Yes
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow 2013-2018 Cadillac ATS Street Series Axle-Back Performance Exhaust System 15196 brings enhanced engine sound and dyno-proven performance to your 3.6L 2013-2018 Cadillac ATS with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Cadillac ATS exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Cadillac ATS's exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15196 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2016 - Cadillac ATS | V | - | 6 Cyl 3.6L | Sedan | 222 |
Showing 1 - 10 of 15 products
Loading...