Shop By Product Matching "Mopar"
Choose a Model for your 1963 Chrysler
Image
Product
Price
- Dist Billet I3 Mopar 426-440 black cap
- CARB Executive Order D-57-23; Not for use with solid core spark plug wires; Black Male Cap; Vacuum Advance; 426-440
- FLAME-THROWER BILLET DISTRIBUTOR WITH IGNITOR III ELECTRONICS FOR MOPAR 413-400 INCLUDING 426 HEMI ENGINES. VACUUM ADVANCE WITH BLACK FEMALE STYLE CAP.
- Product Attributes:
- Emission Description: This Product Has Been Granted A California Air Resources Board (carb) "e.o" (executive Order) Exemption, Or Is Considered A Direct Replacement Or Consolidated Replacement Part. It Is 50 State Legal When Installed On The Appropriate Vehicle Per The Manufac
- Prop 65 (C, R or CR): Cr
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1963 - Chrysler Imperial | V | 6769 | 8 Cyl 6.7L | Base | 413 |
- Mopar Big Block Chrysler Electric Water Pump
- Mopar Big Block Chrysler Electric Water Pump Emblem: MOPAR Emblem Finish: Silver/Black
- Sold Individually
- Product Attributes:
- Emblem: Mopar Emblem
- Rotation: Clockwise
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Feature/Benefit: This All New Mopar Billet Electric Big Block Chrysler Water Pump Features The Durable Proform 12-volt Motor, Billet Mounting Plate For Added Strength, And Pumps Up To 35+ Gallons Of Water Per Minute.
- Flow Rate: 35 Gpm
- Engine: Chrysler Big Block
- Impeller Vane Quantity: 1
- Includes Back Housing: No
- Mounting Hole Quantity: 4
- Make: Chrysler
- Finish: Silver/black
- Outlet Quantity: 1
- Water Pump Drive Type: Electric
- Hub Height: 7
- Category: Electric Water Pump
- Thermostat And Housing Included: No
- Installation Warnings: No
- Applications: Chrysler Big Block Engines
- Hub Hole Quantity: 1
- Impeller Rotation: Standard
- Pulley Included: No
- Impeller Material: Aluminum
- This all new Mopar billet aluminum electric big block Chrysler water pump features a durable 12-volt motor, billet mounting plate for added strength, and pumps up to 35+ gallons of water per minute. The retro-style Mopar Emblem is prominently displayed on the smooth, dark, powdercoat finish of the motor. Depth from flange to motor's end is 3.250 inches. Fits B, RB and Hemi engines. Fits Chrysler B, RB, and HEMI Big Block Engines. Sold Individually.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Chrysler Newport | V | 6769 | 8 Cyl 6.7L | 413 |
- Mopar Big Block Chrysler Electric Water Pump
- Mopar Big Block Chrysler Electric Water Pump; Emblem:MOPAR Emblem; Finish:Silver/Black
- Sold Individually
- Product Attributes:
- Emblem: Mopar Emblem
- Rotation: Clockwise
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Feature/Benefit: This All New Mopar Billet Electric Big Block Chrysler Water Pump Features The Durable Proform 12-volt Motor, Billet Mounting Plate For Added Strength, And Pumps Up To 35+ Gallons Of Water Per Minute.
- Flow Rate: 35 Gpm
- Engine: Chrysler Big Block
- Impeller Vane Quantity: 1
- Includes Back Housing: No
- Mounting Hole Quantity: 4
- Make: Chrysler
- Finish: Silver/black
- Outlet Quantity: 1
- Water Pump Drive Type: Electric
- Hub Height: 7
- Category: Electric Water Pump
- Thermostat And Housing Included: No
- Installation Warnings: No
- Applications: Chrysler Big Block Engines
- Hub Hole Quantity: 1
- Impeller Rotation: Standard
- Pulley Included: No
- Impeller Material: Aluminum
- This all new Mopar billet aluminum electric big block Chrysler water pump features a durable 12-volt motor, billet mounting plate for added strength, and pumps up to 35+ gallons of water per minute. The retro-style Mopar Emblem is prominently displayed on the smooth, dark, powdercoat finish of the motor. Depth from flange to motor's end is 3.250 inches. Fits B, RB and Hemi engines. Fits Chrysler B, RB, and HEMI Big Block Engines. Sold Individually.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Chrysler Newport | V | 5917 | 8 Cyl 5.9L | 361 |
- Exhaust Gasket-MOPAR V8, 361-440
- "Suggested Torque: 20 Ft Lbs; 1-7/8"" x 1-3/8"" Square Port; 2pc Set"
- V8 - 361 ('57-'67), 383 ('59-'71)(Jensen '70-'71), 400 ('72-'80), 413 ('59-'65), 426 Wedge ('63-'65), 440 ('66-'80)(Jensen '72-'76) 1-7/8" x 1-3/8" Square Port, 2/Set
- Product Attributes:
- Prop 65 - Short Label: Prop65_warning.jpg
- Prop 65 (C, R or CR): Cr
- Material: Graphite
- Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees-day after day, week after week, year after year. Now, they're bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good! Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Additional Fitment Information:
| Vehicle |
|---|
| 1963 - Chrysler Newport |
- Street Pro: Clutch Kit: Mopar 1963-03: 10.5 x 1 x 23
- Street Pro: Clutch Kit: Mopar 1963-03: 10.5 x 1 x 23 Spline
- Product Attributes:
- Pilot Bushing Material: Bronze Oilite
- Counterweight Assist: No
- Quantity: Sold As A Kit.
- Pressure Plate Style: Diaphragm
- Application: 1963-03 Mopar
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: Yes
- Clutch Disc Quantity: 1
- Input Shaft Diameter: 1.000
- Horsepower Rating: 400
- Make: Mopar
- Hub Style: Sprung
- Disc Diameter (in.):
- 10.5 In.
- 10.500
- Input Shaft Quantity: 23
- Clutch Usage: Performance
- Disc Style: Full Face
- Throwout Bearing Included: Yes
- Flywheel Included: No
-
Features:
- • High Performance Street Upgrade. • Organic Lined Sprung Hub Disc. • Excellent Street Drivability. • Smooth, Even Engagement.
- The Street Pro is the perfect choice for an entry level performance clutch for the street. We recommend it for cars up to 400hp (depending on part number) with mild engine mods and street tires. Included is a high clamp load pressure plate, an organic disc for smooth and even engagement with increased holding power over stock. Our kits are complete with Pressure Plate, Disc, throw out bearing (where applicable) pilot bushing (where applicable) and alignment tool. If you are looking for a clutch that's a great step up from your stock set up, the McLeod Street Pro is the clutch for you.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1963 - Chrysler Newport | V | 5917 | Manual | 8 Cyl 5.9L | Base | 361 |
- Exhaust Gasket-MOPAR V8, 361-440
- Suggested Torque: 20 Ft Lbs; 1-7/8" x 1-3/8" Square Port, 2/Set
- V8 - 361 ('57-'67), 383 ('59-'71)(Jensen '70-'71), 400 ('72-'80), 413 ('59-'65), 426 Wedge ('63-'65), 440 ('66-'80)(Jensen '72-'76) 1-7/8" x 1-3/8" Square Port, 2/Set
- Product Attributes:
- Prop 65 - Short Label: Prop65_warning.jpg
- Prop 65 (C, R or CR): Cr
- Material: Graphite
- Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees-day after day, week after week, year after year. Now, they're bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good! Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Chrysler Newport | V | 6769 | 8 Cyl 6.7L | 413 |
- Crank Bolts: 7/16in x 20: GM, Ford, Mopar: Set of 6
- Crank Bolts: 7/16in x 20: GM, Ford, Mopar: Set of 6
- Product Attributes:
- Material Finish: Black Oxide
- Washer Included: No
- Head Style: 6 Point
- Fastener Grade: Grade 8
- Quantity:
- Sold As A Set Of 6.
- Sold In Package Of 6 Bolts.
- Fastener Color: Black
- Bolt Location: Flywheel To Crankshaft
- Fastener Material: Steel
- Make: Gm, Ford, Mopar
-
Features:
- All McLeod Racing hardware is quality Grade 8 Hardware that is to made proprietary to McLeod Racings specs. We also are proud to use ARP the world wide leader in performance hardware in some parts numbers.
- Flywheel bolts play a very important role in the performance and safety of race cars and street machines alike. That's why McLeod offers flywheel bolt kits that are far superior to OEM hardware, so you can bolt in your flywheel with confidence. McLeqod steel bolt kits offer increased strength and improved flywheel register.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1963 - Chrysler 300 | V | 6286 | Manual | United States | 8 Cyl 6.3L | Base | 383 |
- Crank Bolts: 7/16in x 20: GM, Ford, Mopar: Set of 6
- Crank Bolts: 7/16in x 20: GM, Ford, Mopar: Set of 6
- Product Attributes:
- Washer Included: No
- Head Style: 6 Point
- Quantity: Sold As A Set Of 6.
- Fastener Color: Black
- Fastener Material: Steel
- Make: Gm, Ford, Mopar
-
Features:
- All McLeod Racing hardware is quality Grade 8 Hardware that is to made proprietary to McLeod Racings specs. We also are proud to use ARP the world wide leader in performance hardware in some parts numbers.
- Flywheel bolts play a very important role in the performance and safety of race cars and street machines alike. That's why McLeod offers flywheel bolt kits that are far superior to OEM hardware, so you can bolt in your flywheel with confidence. McLeqod steel bolt kits offer increased strength and improved flywheel register.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1963 - Chrysler 300 | V | 6286 | Manual | United States | 8 Cyl 6.3L | Base | 383 |
Showing 1 - 8 of 8 products
Loading...