Image
Product
Price
- For Ford 9.75" (12 Bolt); 4.30 Ratio; 1997-1999.5 Models Require Additional Spacer For Pinion Bearing Preload
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- Differential Case Design Type: Ford 9.75
- Ring Gear Diameter: 9.75
- Gear Ratio: 4.30
- Ring & Pinion Gear Ratio: 4.30
- Pinion Shaft Diameter: 1.97
- Ring Gear Material: 8620 Steel
- Taxonomy C: Rear
- Ring Gear Outside Diameter: 9.75
- Taxonomy D: 4.30
- Ring Gear Rotation: Standard
- Taxonomy A: Ld Differential
- Taxonomy B: Ring And Pinion
- Pinion Spline Count: 31
- App/Model: Ford 9.75
- Ring Gear Tooth Quantity: 43
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
F975430
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - Lincoln Navigator | Rear |
- Differential Master Bearing Kit - Koyo
- For Dana 70HD; Inner Bearing HM807040/010, Carrier Bearing 469/453X; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
- Motive Gear - Differential Master Bearing Kit - Koyo
- Differential Bearing Kit
- Product Attributes:
- Differential Case Design Type: Dana 70 Hd
- Taxonomy C: Master Bearing Kits
- Taxonomy D: Rear
- Taxonomy A: Ld Differential
- Taxonomy B: Differential Rebuild Kits
- App/Model: Dana 70 Hd
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
331K, K35-2036, R70HRMKT, XL-1093-1, ZK D70-HD
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - GMC Savana 3500 | Rear |
- Differential Master Bearing Kit - Koyo
- For GM 9.5" (14 Bolt); Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
- Motive Gear - Differential Master Bearing Kit - Koyo
- Differential Bearing Kit
- Product Attributes:
- Differential Case Design Type: Gm 9.5
- Taxonomy C: Master Bearing Kits
- Taxonomy D: Rear
- Taxonomy A: Ld Differential
- Taxonomy B: Differential Rebuild Kits
- App/Model: Gm 9.5
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
83-1067-1, R9.5GRLMKT, XL-1067-1, ZK GM9.5-B
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - Chevrolet Silverado | Rear |
- Differential Master Bearing Kit - Koyo
- For GM 10.5" (14 Bolt); 4.10 Ratio and Lower Case; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
- Motive Gear - Differential Master Bearing Kit - Koyo
- Differential Bearing Kit
- Product Attributes:
- Differential Case Design Type: Gm 10.5
- Taxonomy C: Master Bearing Kits
- Taxonomy D: Rear
- Taxonomy A: Ld Differential
- Taxonomy B: Differential Rebuild Kits
- App/Model: Gm 10.5
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
388K, 83-1065-1, K35-2023B, R14RLAMKHT, XL-1065-1, ZK GM14T-C
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - Chevrolet C3500 | Rear |
- For Dana 70; 3.73 Ratio; Has 5/8" Offset Of Pinion; Requires a 4.10 and Numerically Lower Ratio Carrier
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- Differential Case Design Type:
- Dana 70
- Dana 70 Hd
- Dana 70 U
- Ring Gear Diameter: 10.5
- Gear Ratio: 3.73
- Ring & Pinion Gear Ratio: 3.73
- Pinion Shaft Diameter: 1.75
- Ring Gear Material: 8620 Steel
- Taxonomy C: Rear
- Ring Gear Outside Diameter: 10.5
- Taxonomy D: 3.73
- Ring Gear Rotation: Standard
- Taxonomy A: Ld Differential
- Taxonomy B: Ring And Pinion
- Differential Carrier Break: 4.10 Ratio And Lower
- Pinion Spline Count: 29
- App/Model:
- Dana 70
- Dana 70 Hd
- Dana 70 U
- Pinion Gear Tooth Quantity: 11
- Ring Gear Tooth Quantity: 41
- Differential Case Design Type:
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
2-2035-373, 24073, 706999-3X, 717A730B, 72160-5X, D70-373-NG, D70373, YG D70-373
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - GMC C3500 | Rear |
- For GM 9.5" (14 Bolt); 3.42 Ratio; Requires a 3.42 and Numerically Higher Ratio Carrier
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- Differential Case Design Type: Gm 9.5
- Ring Gear Diameter: 9.5
- Gear Ratio: 3.42
- Ring & Pinion Gear Ratio: 3.42
- Pinion Shaft Diameter: 1.876
- Ring Gear Material: 8620 Steel
- Taxonomy C: Rear
- Ring Gear Outside Diameter: 9.5
- Taxonomy D: 3.42
- Ring Gear Rotation: Standard
- Taxonomy A: Ld Differential
- Taxonomy B: Ring And Pinion
- Differential Carrier Break: 3.42 Ratio And Higher
- Pinion Spline Count: 30
- App/Model: Gm 9.5
- Cover Bolt Quantity: 14
- Ring Gear Tooth Quantity: 41
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
1-2010-342, 14038000, 20914868, 24502, 26015981, 26016526, 26058344, 26060559, 40051784, 40173817, 743B730, 84032508, G895342, GM9.5-342-NG, GM95342, SGM9501, YG GM9.5-342
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - GMC K2500 | Rear |
- For GM 10.5" (14 Bolt); 3.75 Ratio; Requires a 4.10 and Numerically Lower Ratio Carrier
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- Differential Case Design Type: Gm 10.5
- Ring Gear Diameter: 10.5
- Gear Ratio: 3.75
- Ring & Pinion Gear Ratio: 3.75
- Pinion Shaft Diameter: 1.75
- Ring Gear Material: 8620 Steel
- Taxonomy C: Rear
- Ring Gear Outside Diameter: 10.5
- Taxonomy D: 3.73
- Ring Gear Rotation: Standard
- Taxonomy A: Ld Differential
- Taxonomy B: Ring And Pinion
- Differential Carrier Break: 4.10 Ratio And Lower
- Pinion Spline Count: 30
- App/Model: Gm 10.5
- Cover Bolt Quantity: 14
- Ring Gear Tooth Quantity: 45
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
1-2023-373, 12471291, 2-2023-373, 24134, 26014192, 26054996, 327721, 40010707, 40058731, 471871, 744A730A, GM105373, GM14T-373-NG, SGM10501, YG GM14T-373
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - Chevrolet K2500 | Rear |
- For GM 10.5" (14 Bolt); 4.10 Ratio; Requires a 4.10 and Numerically Lower Ratio Carrier
- Motive Gear - Differential Ring and Pinion
- Differential Ring and Pinion
- Product Attributes:
- Differential Case Design Type: Gm 10.5
- Gear Ratio: 4.10
- Ring Gear Diameter: 10.5
- Ring & Pinion Gear Ratio: 4.10
- Pinion Shaft Diameter: 1.75
- Ring Gear Material: 8620 Steel
- Taxonomy C: Rear
- Ring Gear Outside Diameter: 10.5
- Taxonomy D: 4.10
- Ring Gear Rotation: Standard
- Taxonomy A: Ld Differential
- Taxonomy B: Ring And Pinion
- Differential Carrier Break: 4.10 Ratio And Lower
- Pinion Spline Count: 30
- App/Model: Gm 10.5
- Cover Bolt Quantity: 14
- Pinion Gear Tooth Quantity: 11
- Ring Gear Tooth Quantity: 45
- Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
This Part Fits the Following OEM/Substitute Numbers:
1-2023-410, 2-2023-410, 20920669, 24135, 26014193, 26029468, 26029846, 26054993, 40010712, 40070463, 471872, 744A730B, GM105410, GM14T-410-NG, SGM10502, YG GM14T-411
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - GMC P3500 | Rear |
Showing 1 - 8 of 8 products
Loading...