Image
Product
Price
- w/Aluminum Carrier; Rubber Coated Sealing; No Requires Silicone Fits Ford C4
- Automatic Transmission Oil Pan Gasket; w/Aluminum Carrier; Rubber Coated Sealing; No Requires Silicone;
- Automatic Transmission Oil Pan Gasket
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Excellent Torque Retention Prevent Possible Leaks
- Positive Seal Under Severe Temperatures/Conditions
- Silicone Elastomer Beading Provides Un-Matched Gasket Strength
- Aluminum Carrier Provides Un-Matched Gasket Strength
- Premium Transmission Pan Gaskets Have You Covered
- Mr. Gasket Transmission Oil Pan Gaskets offer simple, no silicone installation. They use an aluminum carrier, silicone elastomer beading and a rubber coated binder to create a strong, long lasting seal perfect for the demands of high fluid temperatures created in transmissions. Whether you are sitting in heavy traffic, racing, off-roading or just want a clean garage floor, these premium transmission pan gaskets from Mr. Gasket have you covered.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1980 - Mercury Bobcat | L | - | 4 Cyl 2.3L | 140 |
- For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
- Electric Fuel Pump
- Product Attributes:
- Maximum PSI: 7
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Fuel System Type: Carbureted
- Free Flow GPH: 35
- Item Weight: 0.750 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Mercury Zephyr |
- For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
- Electric Fuel Pump
- Product Attributes:
- Maximum PSI: 7
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Fuel System Type: Carbureted
- Free Flow GPH: 35
- Item Weight: 0.750 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Mercury Zephyr |
- Automatic Transmission Oil Pan Gasket
- w/Aluminum Carrier; Rubber Coated Sealing; No Requires Silicone Fits Ford C4
- Automatic Transmission Oil Pan Gasket; w/Aluminum Carrier; Rubber Coated Sealing; No Requires Silicone;
- Transmission Pan Gasket
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Excellent Torque Retention Prevent Possible Leaks
- Positive Seal Under Severe Temperatures/Conditions
- Silicone Elastomer Beading Provides Un-Matched Gasket Strength
- Aluminum Carrier Provides Un-Matched Gasket Strength
- Premium Transmission Pan Gaskets Have You Covered
- Mr. Gasket Transmission Oil Pan Gaskets offer simple, no silicone installation. They use an aluminum carrier, silicone elastomer beading and a rubber coated binder to create a strong, long lasting seal perfect for the demands of high fluid temperatures created in transmissions. Whether you are sitting in heavy traffic, racing, off-roading or just want a clean garage floor, these premium transmission pan gaskets from Mr. Gasket have you covered.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1980 - Mercury Monarch | L | - | 6 Cyl 4.1L | 250 |
- Rectangle Port Shape; Port Dimensions W-1.12 in. x H-1.48 in.
- Ultra Seal Exhaust Gasket Set; Rectangle Port Shape; Port Dimensions W-1.12 in. x H-1.48 in.;
- Ultra Seal Exhaust Gasket Set
- Product Attributes:
- Gasket Line: Ultra-seal
- WARNING CA Proposition 65: No
- Port Shape: Rectangle
- Collector Gaskets Included: No
- Engine Make/Size: Ford Small Block Windsor
- Port Size: 1.120 In. X 1.480 In.
-
Features:
- Withstands Intense Exhaust Heat
- Graphite-Impregnated Facing
- Steel Expanded Metal Core
- Superior Tensile Strength
- Resists Deteriorating
- Anti-Stick Properties
- Easy Removal For Disassembly
- Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
This Part Fits the Following OEM/Substitute Numbers:
1415
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1980 - Mercury Marquis | V | - | 8 Cyl 5.0L | 302 |
- Rectangle Port Shape; Port Dimensions W-1.12 in. x H-1.48 in.
- Ultra Seal Exhaust Gasket Set; Rectangle Port Shape; Port Dimensions W-1.12 in. x H-1.48 in.;
- Ultra Seal Exhaust Gasket Set
- Product Attributes:
- Gasket Line: Ultra-seal
- WARNING CA Proposition 65: No
- Port Shape: Rectangle
- Collector Gaskets Included: No
- Engine Make/Size: Ford Small Block Windsor
- Port Size: 1.120 In. X 1.480 In.
-
Features:
- Withstands Intense Exhaust Heat
- Graphite-Impregnated Facing
- Steel Expanded Metal Core
- Superior Tensile Strength
- Resists Deteriorating
- Anti-Stick Properties
- Easy Removal For Disassembly
- Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine Version | CID |
|---|---|---|---|---|---|
| 1980 - Mercury Grand Marquis | V | 5753 | 8 Cyl 5.8L | Modified | 351 |
- 180 deg.; Race Only
- High Performance Thermostat; 180 deg.; Race Only;
- High Performance Thermostat
- Product Attributes:
- Temperature: 180° F
- WARNING CA Proposition 65: Yes
- Diameter (in.): 2.120 In.
-
Features:
- Rated To Open At 180 Degrees
- Opens At Right Temperature Regardless Of RPM
- Brass and Copper Construction
- Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1980 - Mercury Marquis | V | - | 8 Cyl 5.0L | 302 |
- 180 deg.; Race Only
- High Performance Thermostat; 180 deg.; Race Only;
- High Performance Thermostat
- Product Attributes:
- Temperature: 180° F
- WARNING CA Proposition 65: Yes
- Diameter (in.): 2.120 In.
-
Features:
- Rated To Open At 180 Degrees
- Opens At Right Temperature Regardless Of RPM
- Brass and Copper Construction
- Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Mercury Cougar |
- w/Bolts And O-Ring; 45 deg. Angled Neck
- Water Neck; w/Bolts And O-Ring; 45 deg. Angled Neck;
- Water Neck
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Chrome Plated
- This Is A 45 Degree Neck
- Comes With O-Ring And Bolts
- Has Small Hose Fitting On It
- Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine Version | CID |
|---|---|---|---|---|---|
| 1980 - Mercury Marquis | V | 5753 | 8 Cyl 5.8L | Modified | 351 |
- w/Bolts And O-Ring; 45 deg. Angled Neck
- Water Neck; w/Bolts And O-Ring; 45 deg. Angled Neck;
- Water Neck
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Chrome Plated
- This Is A 45 Degree Neck
- Comes With O-Ring And Bolts
- Has Small Hose Fitting On It
- Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine Version | CID |
|---|---|---|---|---|---|
| 1980 - Mercury Marquis | V | 5753 | 8 Cyl 5.8L | Modified | 351 |
Showing 1 - 10 of 12 products
Loading...