Image
Product
Price
- WIX Spin-On Lube Filter
- Original Equipment Part Number 15208-53J00; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.685
- Burst Pressure: 400
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 11-14
- Flow Rate: 7-9 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 276, 0060290915006, 02/630475, 0410758, 0410801, 0418066, 0418102, 070185E, 070185ES, 070185F, 078185E, 0892202001, 0892202002, 0FE00377, 1001626, 1111518, 1150101660, 1150101870...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1994 - Nissan Tsuru | L | 1998 | Mexico | 4 Cyl 2.0L | 122 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Kit contains the following: upper & lower timing chains, 2 cam sprockets, crank sprocket, LH and RH guides for lower chain, top guide for upper chain (top guide not used on some engines; LH guide for upper chain is no longer required), upper & lower chain tensioners, front crank seal, and 2 cam sprocket retaining bolts. Timing cover gaskets are not used on this appplication; use the appropriate liquid gasket sealant instead. Order idler sprocket 13077-1E400 (Altima) or 13077-53F00 (240SX) separately.
Additional Fitment Information:
| Vehicle |
|---|
| 1994 - Nissan 240SX |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Idler - Camshafts to Camshafts
- Kit contains the following: upper & lower timing chains, 2 cam sprockets, crank sprocket, LH and RH guides for lower chain, top guide for upper chain (top guide not used on some engines; LH guide for upper chain is no longer required), upper & lower chain tensioners, front crank seal, and 2 cam sprocket retaining bolts. Timing cover gaskets are not used on this appplication; use the appropriate liquid gasket sealant instead. Order idler sprocket 13077-1E400 (Altima) or 13077-53F00 (240SX) separately.
Additional Fitment Information:
| Vehicle |
|---|
| 1994 - Nissan 240SX |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Tensioner
- Kit contains the following: upper & lower timing chains, 2 cam sprockets, crank sprocket, LH and RH guides for lower chain, top guide for upper chain (top guide not used on some engines; LH guide for upper chain is no longer required), upper & lower chain tensioners, front crank seal, and 2 cam sprocket retaining bolts. Timing cover gaskets are not used on this appplication; use the appropriate liquid gasket sealant instead. Order idler sprocket 13077-1E400 (Altima) or 13077-53F00 (240SX) separately.
Additional Fitment Information:
| Vehicle |
|---|
| 1994 - Nissan 240SX |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Idler - Crankshaft to Intermediate Sprocket
- Kit contains the following: upper & lower timing chains, 2 cam sprockets, crank sprocket, LH and RH guides for lower chain, top guide for upper chain (top guide not used on some engines; LH guide for upper chain is no longer required), upper & lower chain tensioners, front crank seal, and 2 cam sprocket retaining bolts. Timing cover gaskets are not used on this appplication; use the appropriate liquid gasket sealant instead. Order idler sprocket 13077-1E400 (Altima) or 13077-53F00 (240SX) separately.
Additional Fitment Information:
| Vehicle |
|---|
| 1994 - Nissan 240SX |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Kit contains the following: upper & lower timing chains, 2 cam sprockets, crank sprocket, LH and RH guides for lower chain, top guide for upper chain (top guide not used on some engines; LH guide for upper chain is no longer required), upper & lower chain tensioners, front crank seal, and 2 cam sprocket retaining bolts. Timing cover gaskets are not used on this appplication; use the appropriate liquid gasket sealant instead. Order idler sprocket 13077-1E400 (Altima) or 13077-53F00 (240SX) separately.
Additional Fitment Information:
| Vehicle |
|---|
| 1994 - Nissan 240SX |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: -07/1993
- This kit contains the necessary chains, tensioner(s), and guides to repair the camshaft timing system on this engine application. The front crank seal is also included in the kit. Other timing cover seals and o-rings are not included in this kit and should be ordered separately. Sprockets are NOT included in this kit and should be reused or obtained from a local dealer as needed.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID | Prod. Date Range |
|---|---|---|---|---|---|
| 1994 - Nissan Sentra | L | 1597 | 4 Cyl 1.6L | 97 | To:07-00-93 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: 08/1993-10/1994, In 8/93, Nissan stopped using chain guide rails on the upper chain (idler gear to camshafts) in GA16DE engines. These two guides, which are included with this kit, can be disregarded for this application.
- This kit contains the necessary chains, tensioner(s), and guides to repair the camshaft timing system on this engine application. The front crank seal is also included in the kit. Other timing cover seals and o-rings are not included in this kit and should be ordered separately. Sprockets are NOT included in this kit and should be reused or obtained from a local dealer as needed.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID | Prod. Date Range |
|---|---|---|---|---|---|
| 1994 - Nissan Sentra | L | 1597 | 4 Cyl 1.6L | 97 | Fr:08-00-93 To:10-00-94 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- This kit contains the following: timing chain, cam sprocket, crank sprocket, LH and RH chain guides, tensioner, front crank seal, 2 guide retaining bolts (for use with late-design guide on earlier engines), and miscellaneous seal rings. The oil pump gasket is serviced separately. Timing cover gaskets are not used on this application; use the appropriate liquid gasket sealant instead.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Nissan D21 | L | 2389 | 4 Cyl 2.4L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: -10/1994, Lower to Upper Chain
- Lower to Upper Chain
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID | Prod. Date Range |
|---|---|---|---|---|---|
| 1994 - Nissan Sentra | L | 1597 | 4 Cyl 1.6L | 97 | To:10-00-94 |
Showing 1 - 10 of 16 products
Loading...