Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 26.3 x 32.3 x 1
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Subaru Impreza |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: -06/1996, 16 per Engine
- When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is also ideal if the engine is allowed to rest over night before starting the engine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
- Lash Adjuster
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID | Prod. Date Range |
|---|---|---|---|---|---|
| 1996 - Subaru Impreza | H | 1781 | 4 Cyl 1.8L | - | To:06-00-96 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 16 per Engine
- When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is also ideal if the engine is allowed to rest over night before starting the engine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
- Lash Adjuster
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1996 - Subaru Legacy | LS |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: 07/1995-06/1996, 16 per Engine
- When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is also ideal if the engine is allowed to rest over night before starting the engine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
- Lash Adjuster
Additional Fitment Information:
| Vehicle | Sub Model | Prod. Date Range |
|---|---|---|
| 1996 - Subaru Impreza | Outback | Fr:07-00-95 To:06-00-96 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: -05/1996, 16 per Engine
- When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is also ideal if the engine is allowed to rest over night before starting the engine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
- Lash Adjuster
Additional Fitment Information:
| Vehicle | Sub Model | Prod. Date Range |
|---|---|---|
| 1996 - Subaru Legacy | L | To:05-00-96 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: 06/1996-
- Includes (1) 13270 AA062 Valve Cover Gasket, (1) 13272 AA063 Valve Cover Gasket, (12) Valve Cover Sealing Washers (4) Spark Plug Tubes, and (4) Cam Plugs.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID | Prod. Date Range |
|---|---|---|---|---|---|
| 1996 - Subaru Legacy | H | 2458 | 4 Cyl 2.5L | - | Fr:06-00-96 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: 06/1995-05/1996, 16 per Engine
- When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is also ideal if the engine is allowed to rest over night before starting the engine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
- Lash Adjuster
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID | Prod. Date Range |
|---|---|---|---|---|---|---|
| 1996 - Subaru Legacy | H | 2212 | 4 Cyl 2.2L | Outback | - | Fr:06-00-95 To:05-00-96 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Subaru Impreza |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: 06/01/1995-05/31/1996, 4 per Engine
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID | Prod. Date Range |
|---|---|---|---|---|---|
| 1996 - Subaru Legacy | H | 2458 | 4 Cyl 2.5L | - | Fr:06-01-95 To:05-31-96 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- At Clutch Pedal
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Subaru Legacy |
Showing 1 - 10 of 15 products
Loading...