Image
Product
Price
- 16 Pcs
- SB Chevy Std Length 16 Pcs Finish: Black Oxide Material: 4130 Chromoly Steel Stud Diameter (in.): 5/16 in.
- Sold As Set Of 16 Pieces
- Product Attributes:
- Category: 1-piece Pushrod Set
- Feature/Benefit: Heat-treated .065 Wall Thickness 4130 Chrome Moly, For Use With Guide Plates.
- Applications: Chevy Small Block Engines
- Exhaust Overall Length: 7.800 In.
- Make: Chevrolet
- Material: 4130 Chromoly Steel
- Pushrod Style: 1-piece
- Stud Diameter (in.): 5/16 In.
- Finish: Black Oxide
- Intake Overall Length: 7.800 In.
- Heat-treated .065 wall thickness 4130 chrome moly, for use with guide plates. 25% thicker walls than a major competitor's brand. Gloss black finish. Premium one-piece pushrods for the price of competitors 3-piece! Each end is precision formed with specified radius for optimum wear characteristics with minimal metal-to-metal friction. 16 pieces per package.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Chevrolet Biscayne | V | 4638 | 8 Cyl 4.6L | 283 |
- 100% New
- 80 AMP 1 Wire Style Machined Pulley Chrome Finish 100% New
- Sold Individually
- Product Attributes:
- Brushless: No
- Voltage: 12 Volt
- Ground Type: Positive
- Pulley Diameter: 2 1/2 Inch
- External Fan Included: Yes
- Case Material: Aluminum
- Case Color: Chrome
- Fan Type: Internal
- Amperage Rating: 80
- Amperage Output: 80 Amp
- Family: 10si Style
- Finish: Chrome
- Case Circumference: 17.5
- Drive End To Rotor Shaft End Distance: 6
- AC Service Tap: No
- Category: Alternators
- Applications: Chevy Small Block 305 To 350 Engines 1972 To 1987; Chevy Big Block 402 To 454 Engines 1970 To 1986; Pontiac 326 To 455 Engines 1962 To 1979; Oldsmobile 215 To 455 Engines 1963 To 1984; Buick 215 To 455 Engines 1963 To 1977
- External Regulator Included: Yes
- Case Style: 10si Style
- Regulator Type: Internal
- Decoupled Or Clutch Pulley: Yes
- Distance Between Mounting Feet: 6.133
- Drive End To Pulley 1st Groove Distance: 1.4
- Feature/Benefit: A Manufacturing Break-through Has Enabled Proform To Offer 100% New Alternators With The Same Affordability As Our Popular Re-built Models!
- One Wire Capable: Yes
- Outside Pulley Diameter: 2.621
- Pulley Cogged Quantity: 1
- Plug Clock Rear View Main Mounting Ear at 6 O Clock: 2
- Pulley Belt Type: V-belt
- Pulley Groove Quantity: 0
- Mounting Type: Standard
- Can you tell the difference? Most chrome alternators look nearly the same, and that's why what's on the inside is so critical. Reliability starts with how it's made. Choosing PROFORM means choosing alternators with components produced by highly specialized machines, assembled by highly trained personnel using dedicated jigs and equipment, with everything 100% new for maximum longevity and optimum performance. After assembly each alternator is individually tested at the factory. Finally, it's boxed with a quality assurance graph that documents the specific unit's output performance. We do the testing, not you! And PROFORM proves it!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Buick Wildcat | V | 6572 | 8 Cyl 6.6L | 401 |
- 100% New
- 80 AMP; 1 Wire Style; Machined Pulley; Chrome Finish; 100% New
- Sold Individually
- Product Attributes:
- Brushless: No
- Voltage: 12 Volt
- Ground Type: Positive
- Pulley Diameter: 2 1/2 Inch
- External Fan Included: Yes
- Case Material: Aluminum
- Case Color: Chrome
- Fan Type: Internal
- Amperage Rating: 80
- Amperage Output: 80 Amp
- Family: 10si Style
- Finish: Chrome
- Case Circumference: 17.5
- Drive End To Rotor Shaft End Distance: 6
- AC Service Tap: No
- Category: Alternators
- Applications: Chevy Small Block 305 To 350 Engines 1972 To 1987; Chevy Big Block 402 To 454 Engines 1970 To 1986; Pontiac 326 To 455 Engines 1962 To 1979; Oldsmobile 215 To 455 Engines 1963 To 1984; Buick 215 To 455 Engines 1963 To 1977
- External Regulator Included: Yes
- Case Style: 10si Style
- Regulator Type: Internal
- Decoupled Or Clutch Pulley: Yes
- Distance Between Mounting Feet: 6.133
- Drive End To Pulley 1st Groove Distance: 1.4
- Feature/Benefit: A Manufacturing Break-through Has Enabled Proform To Offer 100% New Alternators With The Same Affordability As Our Popular Re-built Models!
- One Wire Capable: Yes
- Outside Pulley Diameter: 2.621
- Pulley Cogged Quantity: 1
- Plug Clock Rear View Main Mounting Ear at 6 O Clock: 2
- Pulley Belt Type: V-belt
- Pulley Groove Quantity: 0
- Mounting Type: Standard
- Can you tell the difference? Most chrome alternators look nearly the same, and that's why what's on the inside is so critical. Reliability starts with how it's made. Choosing PROFORM means choosing alternators with components produced by highly specialized machines, assembled by highly trained personnel using dedicated jigs and equipment, with everything 100% new for maximum longevity and optimum performance. After assembly each alternator is individually tested at the factory. Finally, it's boxed with a quality assurance graph that documents the specific unit's output performance. We do the testing, not you! And PROFORM proves it!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Oldsmobile Starfire | V | 6458 | 8 Cyl 6.5L | 394 |
- 100% New
- Amperage Output:100 AMP; Case Style:10SI Style; Finish:Chrome
- Sold Individually
- Product Attributes:
- Brushless: No
- Voltage: 12 Volt
- Ground Type: Positive
- Pulley Diameter: 2 1/2 Inch
- External Fan Included: Yes
- Case Material: Aluminum
- Case Color: Chrome
- Fan Type: Internal
- Amperage Rating: 100
- Amperage Output: 100 Amp
- Family: 10si Style
- Finish: Chrome
- Case Circumference: 17.5
- Drive End To Rotor Shaft End Distance: 6
- AC Service Tap: No
- Category: Alternators
- Applications: Chevy Small Block 305 To 350 Engines 1972 To 1987; Chevy Big Block 402 To 454 Engines 1970 To 1986; Pontiac 326 To 455 Engines 1962 To 1979; Oldsmobile 215 To 455 Engines 1963 To 1984; Buick 215 To 455 Engines 1963 To 1977
- External Regulator Included: Yes
- Case Style: 10si Style
- Regulator Type: Internal
- Decoupled Or Clutch Pulley: Yes
- Distance Between Mounting Feet: 6.133
- Drive End To Pulley 1st Groove Distance: 1.4
- Feature/Benefit: This Alternator Can Be Clocked To All Four Positions By The User.
- One Wire Capable: Yes
- Outside Pulley Diameter: 2.621
- Pulley Cogged Quantity: 1
- Plug Clock Rear View Main Mounting Ear at 6 O Clock: 2
- Pulley Belt Type: V-belt
- Pulley Groove Quantity: 0
- Mounting Type: Standard
- Can you tell the difference? Most chrome alternators look nearly the same, and that's why what's on the inside is so critical. Reliability starts with how it's made. Choosing PROFORM means choosing alternators with components produced by highly specialized machines, assembled by highly trained personnel using dedicated jigs and equipment, with everything 100% new for maximum longevity and optimum performance. After assembly each alternator is individually tested at the factory. Finally, it's boxed with a quality assurance graph that documents the specific unit's output performance. We do the testing, not you! And PROFORM proves it!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Pontiac Tempest | V | 5343 | 8 Cyl 5.3L | 326 |
- 100% New
- Amperage Output: 100 AMP Case Style: 10SI Style Finish: Chrome
- Sold Individually
- Product Attributes:
- Brushless: No
- Voltage: 12 Volt
- Ground Type: Positive
- Pulley Diameter: 2 1/2 Inch
- External Fan Included: Yes
- Case Material: Aluminum
- Case Color: Chrome
- Fan Type: Internal
- Amperage Rating: 100
- Amperage Output: 100 Amp
- Family: 10si Style
- Finish: Chrome
- Case Circumference: 17.5
- Drive End To Rotor Shaft End Distance: 6
- AC Service Tap: No
- Category: Alternators
- Applications: Chevy Small Block 305 To 350 Engines 1972 To 1987; Chevy Big Block 402 To 454 Engines 1970 To 1986; Pontiac 326 To 455 Engines 1962 To 1979; Oldsmobile 215 To 455 Engines 1963 To 1984; Buick 215 To 455 Engines 1963 To 1977
- External Regulator Included: Yes
- Case Style: 10si Style
- Regulator Type: Internal
- Decoupled Or Clutch Pulley: Yes
- Distance Between Mounting Feet: 6.133
- Drive End To Pulley 1st Groove Distance: 1.4
- Feature/Benefit: This Alternator Can Be Clocked To All Four Positions By The User.
- One Wire Capable: Yes
- Outside Pulley Diameter: 2.621
- Pulley Cogged Quantity: 1
- Plug Clock Rear View Main Mounting Ear at 6 O Clock: 2
- Pulley Belt Type: V-belt
- Pulley Groove Quantity: 0
- Mounting Type: Standard
- Can you tell the difference? Most chrome alternators look nearly the same, and that's why what's on the inside is so critical. Reliability starts with how it's made. Choosing PROFORM means choosing alternators with components produced by highly specialized machines, assembled by highly trained personnel using dedicated jigs and equipment, with everything 100% new for maximum longevity and optimum performance. After assembly each alternator is individually tested at the factory. Finally, it's boxed with a quality assurance graph that documents the specific unit's output performance. We do the testing, not you! And PROFORM proves it!
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 1963 - GMC Suburban | V | 4638 | OHV | United States | 8 Cyl 4.6L | 283 |
- Fits Ford 289-302 Engine
- HEI Distributor; Street/Strip; Built-In Coil;Housing Finish:Natural; Cap Color:Blue
- Made From Billet Aluminum With Natural Finish
- Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Distributor Cap Included: Yes
- Grade Type: Performance
- Make: Ford
- Gear Material: Cast Iron
- Trigger Type: Magnetic
- Advance Type: Mechanical And Vacuum
- Category: Distributors
- Marine Approved: No
- Applications: Ford 289 To 302 5.0 Engines
- Vacuum Advance: 13 Degrees
- Ignition Box Required: No
- Feature/Benefit: Street/strip Distributor Has A Built-in Coil And Features A Blue Cap.
- Shaft Material: Aluminum
- Cap Color: Blue
- Rotor Rotation: Clockwise (right)
- Ignition Rotor Included: Yes
- Mechanical Advance: 22 Degrees
- Ignition Coil Included: Yes
- Coil Wire Included: Yes
- Terminal Type: Lead Wire
- Terminal Gender: Male
- Shaft Length: 9.65
-
Features:
- Street/strip distributor has a built-in coil and features a blue cap.
- This HEI distributor is a street/strip version. It has a built-in coil with a magnetic trigger and features a blue distributor cap. Designed to fit Ford 289-302 5.0 engines. Distributor comes with an iron gear. Not compatible with factory roller camshafts without gear change using the recommendation of the cam manufacturer. Unit is made from high quality billet aluminum material and features a natural finish. Made from 100% new components. Utilizing the durable and dependable high energy ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found high energy ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Backed by a limited 30 day factory warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Ford 300 | V | 4727 | 8 Cyl 4.7L | 289 |
- For Ford 289-302 Engine
- HEI Distributor; Street/Strip; Built-In Coil; Black Cap; Housing Finish:Natural
- Made From Billet Aluminum With Natural Finish
- Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Distributor Cap Included: Yes
- Grade Type: Performance
- Make: Ford
- Gear Material: Cast Iron
- Trigger Type: Magnetic
- Advance Type: Mechanical And Vacuum
- Category: Ford Hei Distributor
- Marine Approved: No
- Applications: Ford 289 To 302 5.0 Engines
- Vacuum Advance: 13 Degrees
- Ignition Box Required: No
- Feature/Benefit: Street/strip Distributor Has A Built-in Coil And Features A Black Cap.
- Shaft Material: Aluminum
- Cap Color: Black
- Rotor Rotation: Clockwise (right)
- Ignition Rotor Included: Yes
- Mechanical Advance: 22 Degrees
- Ignition Coil Included: Yes
- Coil Wire Included: Yes
- Terminal Type: Lead Wire
- Terminal Gender: Male
- Shaft Length: 9.65
-
Features:
- Street/strip distributor has a built-in coil and features a black cap.
- This HEI distributor is a street/strip version. It has a built-in coil with a magnetic trigger and features a black distributor cap. Designed to fit Ford 289-302 5.0 engines. Distributor comes with an iron gear. Not compatible with factory roller camshafts without gear change using the recommendation of the cam manufacturer. Unit is made from high quality billet aluminum material and features a natural finish. made from 100% new components. Utilizing the durable and dependable high energy ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found high energy ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Backed by a limited 30 day factory warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Ford 300 | V | 4727 | 8 Cyl 4.7L | 289 |
- For Ford 289-302 Engine
- HEI Distributor Street/Strip Built-In Coil Black Cap Housing Finish: Natural
- Made From Billet Aluminum With Natural Finish
- Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Distributor Cap Included: Yes
- Grade Type: Performance
- Make: Ford
- Gear Material: Cast Iron
- Trigger Type: Magnetic
- Advance Type: Mechanical And Vacuum
- Category: Ford Hei Distributor
- Marine Approved: No
- Applications: Ford 289 To 302 5.0 Engines
- Vacuum Advance: 13 Degrees
- Ignition Box Required: No
- Feature/Benefit: Street/strip Distributor Has A Built-in Coil And Features A Black Cap.
- Shaft Material: Aluminum
- Cap Color: Black
- Rotor Rotation: Clockwise (right)
- Ignition Rotor Included: Yes
- Mechanical Advance: 22 Degrees
- Ignition Coil Included: Yes
- Coil Wire Included: Yes
- Terminal Type: Lead Wire
- Terminal Gender: Male
- Shaft Length: 9.65
-
Features:
- Street/strip distributor has a built-in coil and features a black cap.
- This HEI distributor is a street/strip version. It has a built-in coil with a magnetic trigger and features a black distributor cap. Designed to fit Ford 289-302 5.0 engines. Distributor comes with an iron gear. Not compatible with factory roller camshafts without gear change using the recommendation of the cam manufacturer. Unit is made from high quality billet aluminum material and features a natural finish. made from 100% new components. Utilizing the durable and dependable high energy ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found high energy ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Backed by a limited 30 day factory warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Ford Galaxie | V | 4727 | 8 Cyl 4.7L | 289 |
- Fits Ford 289-302 Engine
- HEI Distributor Street/Strip Built-In Coil Housing Finish: Natural Cap Color: Blue
- Made From Billet Aluminum With Natural Finish
- Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Distributor Cap Included: Yes
- Grade Type: Performance
- Make: Ford
- Gear Material: Cast Iron
- Trigger Type: Magnetic
- Advance Type: Mechanical And Vacuum
- Category: Distributors
- Marine Approved: No
- Applications: Ford 289 To 302 5.0 Engines
- Vacuum Advance: 13 Degrees
- Ignition Box Required: No
- Feature/Benefit: Street/strip Distributor Has A Built-in Coil And Features A Blue Cap.
- Shaft Material: Aluminum
- Cap Color: Blue
- Rotor Rotation: Clockwise (right)
- Ignition Rotor Included: Yes
- Mechanical Advance: 22 Degrees
- Ignition Coil Included: Yes
- Coil Wire Included: Yes
- Terminal Type: Lead Wire
- Terminal Gender: Male
- Shaft Length: 9.65
-
Features:
- Street/strip distributor has a built-in coil and features a blue cap.
- This HEI distributor is a street/strip version. It has a built-in coil with a magnetic trigger and features a blue distributor cap. Designed to fit Ford 289-302 5.0 engines. Distributor comes with an iron gear. Not compatible with factory roller camshafts without gear change using the recommendation of the cam manufacturer. Unit is made from high quality billet aluminum material and features a natural finish. Made from 100% new components. Utilizing the durable and dependable high energy ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found high energy ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Backed by a limited 30 day factory warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Ford 300 | V | 4727 | 8 Cyl 4.7L | 289 |
- 100% New
- Amperage Output:100 AMP; Finish:Chrome; Case Style:10SI (Ford)
- Sold Individually
- Product Attributes:
- Brushless: No
- Voltage: 12 Volt
- Ground Type: Positive
- Pulley Diameter: 2 1/2 Inch
- External Fan Included: Yes
- Case Material: Aluminum
- Case Color: Chrome
- Fan Type: Internal
- Amperage Rating: 100
- Amperage Output: 100 Amp
- Family: 10si Style
- Finish: Chrome
- Case Circumference: 17.5
- Drive End To Rotor Shaft End Distance: 6
- AC Service Tap: No
- Category: Alternators
- External Regulator Included: Yes
- Case Style: 10si (ford)
- Regulator Type: Internal
- Decoupled Or Clutch Pulley: Yes
- Distance Between Mounting Feet: 6.133
- Drive End To Pulley 1st Groove Distance: 1.4
- Feature/Benefit: A Manufacturing Break-through Has Enabled Proform To Offer 100% New Alternators With The Same Affordability As Our Popular Re-built Models!
- One Wire Capable: Yes
- Outside Pulley Diameter: 2.621
- Pulley Cogged Quantity: 1
- Plug Clock Rear View Main Mounting Ear at 6 O Clock: 2
- Pulley Belt Type: V-belt
- Pulley Groove Quantity: 0
- Mounting Type: Standard
- PROFORM's 100 AMP Alternator, for Ford 260-460 engines, is a 1-wire, GM 10 SI Case Style complete with Internal Regulator. The External Fan Style Alternator features a Machined Pulley, Chrome Finish and is NOT made with re-man components. Each alternator is produced by highly specialized machines, assembled by highly trained personnel using dedicated jigs and equipment - 100% New. Sold individually.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Ford 300 | V | 4727 | 8 Cyl 4.7L | 289 |
Showing 1 - 10 of 113 products
Loading...