Image
Product
Price
- 4 Pcs
- Chrome with Red Bowtie Logo; SB Chevy
- Sold As One Set of 4 Pieces
- Product Attributes:
- Emblem: Chevy Bowtie Emblem
- Category: Hold-down Clamps
- Feature/Benefit: Premium Street Performance Chrome Hold-down Clamps With Distinctive Look And Boldly Striking Bowtie Emblems, Inlaid With Classic Chevrolet Red.
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986; Chevy V6 Engines; Chevy Big Block 396 To 454 Engines 1965 To 1996
- Emblem Style: Recessed Red & Black Emblem
- Material: Steel
- Finish: Chrome
- Premium Street Performance Chrome hold-down clamps with distinctive look and boldly striking Bowtie Emblems, inlaid with classic Chevrolet red. By spreading the load over a wider area, this clamp minimizes distortion of the valve cover flanges, thereby decreasing the possibility of oil leakage. Fits Chevrolet small-block V8 and V6/90 engines through 1986. 4 per package.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 2002 - Chevrolet LUV |
- 16 Pcs
- SB Chevy;Std Length; 16 Pcs; Finish:Black Oxide; Material:4130 Chromoly Steel;Stud Diameter (in.):5/16 in.
- Sold As Set Of 16 Pieces
- Product Attributes:
- Category: 1-piece Pushrod Set
- Feature/Benefit: Heat-treated .065 Wall Thickness 4130 Chrome Moly, For Use With Guide Plates.
- Applications: Chevy Small Block Engines
- Exhaust Overall Length: 7.800 In.
- Make: Chevrolet
- Material: 4130 Chromoly Steel
- Pushrod Style: 1-piece
- Stud Diameter (in.): 5/16 In.
- Finish: Black Oxide
- Intake Overall Length: 7.800 In.
- Heat-treated .065 wall thickness 4130 chrome moly, for use with guide plates. 25% thicker walls than a major competitor's brand. Gloss black finish. Premium one-piece pushrods for the price of competitors 3-piece! Each end is precision formed with specified radius for optimum wear characteristics with minimal metal-to-metal friction. 16 pieces per package.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - GMC Savana 1500 | V | - | 8 Cyl 5.7L | 350 |
- SB Chevy
- Mechanical Short Style; High Flow Model;SB Chevy; Material:Aluminum; Finish:Satin
- Sold Each
- Product Attributes:
- Rotation: Standard
- Category: Mech. Water Pump
- Feature/Benefit: Lightweight Aluminum
- Applications: Chevy Small Block Engines
- Flow Rate: 25 Gpm
- Tool Type: Piston Installation Tools
- Make: Chevrolet
- Material: Aluminum
- Finish: Satin
- PROFORM's new high flow mechanical water pumps feature heavy duty ball bearings for up to 40% more coolant flow giving you real performance value for your dollar. Aluminum construction reduces front end weight!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
- 1-Pair
- Emblem:Chevy Bowtie Emblem
- Sold As One Pair
- Product Attributes:
- Emblem: Chevy Bowtie Emblem
- Category: Wire Looms - Black
- Feature/Benefit: Using The Divisional Red Color, The Chevrolet Name And Bowtie Emblem Are Molded Onto The Black Nylon Head Of Each Wire Loom, Mounted On Chrome Stems.
- Using the divisional red color, the CHEVROLET name and Bowtie Emblem are molded onto the black nylon head of each wire loom, mounted on chrome stems. Fits Chevrolet small-block V8, 1959-86 and Chevrolet big-block V8 1965-91. 4-wire looms, 2 per package.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Chevrolet Sonora | V | - | 8 Cyl 5.7L | 350 |
- Chrysler SB&BB V8 Engines
- Mopar High-Torque Starter;Emblem:MOPAR Emblem; Compression Ratio:14 : 1; Finish:Natural; Gear Reduction Ratio:4.41:1; Material:Aluminum/Steel; Mounting Plate:2-Bolt
- Natural Finish
- Product Attributes:
- Emblem: Mopar Emblem
- Rotation: Standard
- Gear Reduction Ratio: 4.41:1
- Category: Starters
- Feature/Benefit: 4.41-to-1 Sealed Gear-reduction Drive And Full Ball Bearing Construction.
- Applications: Chrysler Engines And Chrysler V6 Engines
- Compression Ratio: 14 : 1
- Mounting Plate: 2-bolt
- Make: Chrysler
- Material: Aluminum/steel
- Finish: Natural
- Featuring the retro-style Mopar Emblem, this high-torque, gear-reduction design starter is made entirely of 100 percent NEW, not rebuilt components. Offset design results in more clearance between the oil pan and the starter. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50 percent more cranking power. 4.41-to-1 sealed gear-reduction drive and full ball bearing construction. Fits all Chrysler V6 and small and big block V8 engines. Sold individually.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Dodge Durango | V | - | 8 Cyl 5.9L | 360 |
- SB Chevy
- Center Bolt Style;Polish w/Bowtie Logo; SB Chevy; Mounting Bolt(s) Included:Yes; Emblem Style:Recessed Red and Black Emblem; Valve Cover Bolt Pattern:Center Bolt; Valve Cover Height:Tall; Material:Die Cast Aluminum
- Sold As One Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Grommets Included: Yes
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Center Bolt
- Hold Down Tabs Included: No
- Finish: Polished
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block Engines 1987 To Pre Ls
- Material:
- Aluminum
- Die Cast Aluminum
- PCV Grommet Included: Yes
- Feature/Benefit: New Larger Emblem.
- Engine: Chevy Sb Gen 2 Vortec
- Breather Grommet Included: Yes
- Valve Cover Gasket Included: No
- Valve Cover Height: Tall
- Mounting Location: Center
- Baffeled: Yes
- Surface Type: Logo
- Construction: Cast
- Material Thickness:
- 0.125
- 3
- Breather Cap Included: No
- Emblem Style: Recessed Red & Black Emblem
- Mounting Bolt(s) Included: Yes
- Inside Clearance Height:
- 3.875
- 99
- Sheen Level: Semi-gloss
- Valve Cover Type: Tall
- New Larger Emblem. Late-Model Die-Cast Aluminum Valve Covers, 1987-current. Center hold-down, tall. Supplied with mounting bolts, steel and rubber washers (also available separately as 141-133). All valve covers sold in pairs.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Chevrolet Express 3500 | V | - | 8 Cyl 5.7L | 350 |
- SB Chevy
- SB Chevy; Mounting Bolt(s) Included:No; Emblem:Chevy Bowtie Emblem; Valve Cover Bolt Pattern:Center Bolt; Valve Cover Height:Stock; Finish:Chrome; Material:Stamped Steel
- Sold As One Pair
- Product Attributes:
- Emblem: Chevy Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: No
- Grommets Included: Yes
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Center Bolt
- Hold Down Tabs Included: No
- Finish: Chrome
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block Engines 1987 To Pre Ls
- Material:
- Stamped Steel
- Steel
- PCV Grommet Included: Yes
- Feature/Benefit: These Chevrolet Bowtie Valve Covers Are Made Of Heavy-gauge Steel, 20% Thicker Than Typical Aftermarket Valve Covers, Greatly Reducing The Likelihood Of Leakage Around The Valve Cover Flange Area Caused By Fasteners Being Over-torqued.
- Engine: Chevy Sb Gen 2 Vortec
- Breather Grommet Included: Yes
- Valve Cover Gasket Included: No
- Valve Cover Height: Stock
- Technical Note: Chev Sm-blk Valve Covers & Valve Cover W/baffle Will Not Clear Most Stud Girdles
- Mounting Location: Center
- Baffeled: Yes
- Surface Type: Logo
- Construction: Stamped
- Material Thickness:
- 0.125
- 3
- Breather Cap Included: No
- Mounting Bolt(s) Included: No
- Inside Clearance Height:
- 2.125
- 54
- Sheen Level: High Gloss
- Valve Cover Type: Short
- These CHEVROLET Bowtie valve covers are made of heavy-gauge steel, 20% thicker than typical aftermarket valve covers, greatly reducing the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. The chrome plating meets GM quality specifications. All valve covers bear the powerful Bowtie and CHEVROLET Emblems. These stamped valve covers are offered in production height (short). Oil restricting baffles are offered in these valve covers for those who wish to maintain the PCV hookup. All valve covers are sold in pairs, equipped with air breather and PCV grommets, unless specified otherwise. Technical Note: Production height Chevy small-block valve covers and valve covers with baffles will not clear most stud girdle applications. Fits Chevy small-block engines 1987 to current.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Chevrolet Express 2500 | V | - | 8 Cyl 5.7L | 350 |
- Recessed Emblems
- SBC;Chrome; Recessed Emblems; Mounting Bolt(s) Included:Yes; Emblem Style:Recessed Red and Black Emblem; Valve Cover Bolt Pattern:Center Bolt; Valve Cover Height:Tall; Material:Die Cast Aluminum
- Sold As Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Grommets Included: Yes
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Center Bolt
- Hold Down Tabs Included: No
- Finish: Chrome
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block Engines 1987 To Pre Ls
- Material:
- Aluminum
- Die Cast Aluminum
- PCV Grommet Included: Yes
- Feature/Benefit: Slant-edge Aluminum Design
- Engine: Chevy Sb Gen 2 Vortec
- Breather Grommet Included: Yes
- Valve Cover Gasket Included: No
- Valve Cover Height: Tall
- Mounting Location: Center
- Baffeled: Yes
- Surface Type: Logo
- Construction: Cast
- Material Thickness:
- 0.175
- 4.5
- Breather Cap Included: No
- Emblem Style: Recessed Red & Black Emblem
- Mounting Bolt(s) Included: Yes
- Inside Clearance Height:
- 2.825
- 71.5
- Sheen Level: High Gloss
- Valve Cover Type: Tall
- The center bolt family of valve covers now can enjoy the wildly popular Slant-Edge look that Gen 1 and LS enthusiasts have been enjoying. Generous internal clearance for larger valve train setups, and recessed emblems are the distinctive features of these new valve covers. Tall, with removable baffle. Grommets, and mounting bolts included. Sold in Pairs. U.S. Pat. D727,362.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Chevrolet Sonora | V | - | 8 Cyl 5.7L | 350 |
- GM LS V8
- High-Torque Starter; Gear Reduction Type; High Compression; Compression Ratio:14 : 1; Finish:Natural; Gear Reduction Ratio:4.41:1; Material:Aluminum/Steel; Mounting Plate:Straight Bolt Mounting Plate; Power Output:1.4 KW
- Natural Finish
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 4.41:1
- Category: Starters
- Power Output: 1.4 Kw
- Feature/Benefit: Clockable Mounting Plate
- Applications: Gm Ls1 Engines, Gm Ls2 Engines And Gm Ls6 Engines
- Compression Ratio: 14 : 1
- Mounting Plate: Straight Bolt Mounting Plate
- Make: Gm
- Material: Aluminum/steel
- Finish: Natural
- For engines with large cubic inches or compression ratios, these 100% NEW starters provide the gear reduction needed to get large engines turned over. Built from scratch with all-new components, the torque rating is a healthy 4.41:1 gear reduction, capable of cranking engines up to 14:1 compression. Mounting bolts and adjustment shims included.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
- LS Engines
- Chrome with Bowtie Logo; LS Engines; Mounting Bolt(s) Included:Yes; Emblem Style:Recessed Red and Black Emblem; Valve Cover Bolt Pattern:Center Bolt; Valve Cover Height:Tall; Material:Die Cast Aluminum
- Sold As One Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Grommets Included: Yes
- Oil Filler Cap Included: Yes
- Make: Gm
- Valve Cover Bolt Pattern: Center Bolt
- Hold Down Tabs Included: No
- Finish: Chrome
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Gm Ls Series Engines
- Cap Finish: Chrome
- Material:
- Aluminum
- Die Cast Aluminum
- Feature/Benefit: Hurray, The Wait Is Over!
- Engine: Chevy/gm Ls
- Breather Grommet Included: No
- Valve Cover Gasket Included: No
- Valve Cover Height: Tall
- Mounting Location: Center
- Baffeled: Yes
- Surface Type: Logo
- Construction: Cast
- Cap Type: Push-in
- Material Thickness:
- 0.175
- 4.5
- Breather Cap Included: No
- Emblem Style: Recessed Red & Black Emblem
- Mounting Bolt(s) Included: Yes
- Inside Clearance Height:
- 2.575
- 65.5
- Sheen Level: High Gloss
- Valve Cover Type: Tall
- Hurray, the wait is over! Through innovative engineering, PROFORM has developed a valve cover that will take your generic looking stock LS engine, and give it a totally personalized look. These new valve covers are taller than stock valve covers, and can accommodate a wide variety of large valve train applications. These valve covers are available in 5 different styles, which include raised and recessed emblems. Unique mounting studs, and oil restricting baffles are included. Threaded mounting holes for Integrated Ignition Coil Bracket included. The passenger side valve cover has an oil filler hole. Sold in pairs. U.S. Pat. D657,798. You will need to purchase rubber gaskets for these valve covers separately. We recommend Fel-Pro part no. VS 50504 R. Internal Clearance note. The following rocker configurations will require the valve cover to be slightly modified: Jesel part numbers: KSS-317070, KSS-317575, and KSS-318080. Attention LSX-DR cylinder head owners: these valve covers will fit LSX-DR heads and clear the shaft mounted valvetrain. The mounting bolts included with these LS covers are not compatible with the LSX-DR cylinder heads. LSX-DR owners will need to purchase a LSX-DR mounting bolt kit.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - GMC Yukon | V | 5328 | 8 Cyl 5.3L | 325 |
Showing 1 - 10 of 29 products
Loading...