Image
Product
Price
- Standard Grade Universal Catalytic Converter - 2.00in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Standard Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Standard Grade Federal / Epa Compliant Universal Catalytic Converter 53004
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53004 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Honda Civic | L | 1588 | 4 Cyl 1.6L | 98 |
- Adj Fuel Press Reg
- Must use AEM Fuel Rail
- Adjustable Fuel Pressure Regulator, Black Anodized, Acura and Honda Inline Flange with Straight Return Line Fitting
- Adjustable Fuel Pressure Regulator;Black
- Adjustable Fuel Pressure Regulator. Black. Acura & Honda Inline Flange with Straight Return Line Fitting
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1991 - Honda Accord | L | 2156 | F22A6 | United States | 4 Cyl 2.2L | EX | - |
- Adj Fuel Press Reg
- Must use AEM Fuel Rail
- Adjustable Fuel Pressure Regulator, Black Anodized, Acura and Honda Inline Flange with Straight Return Line Fitting
- Adjustable Fuel Pressure Regulator;Black
- Adjustable Fuel Pressure Regulator. Black. Acura & Honda Inline Flange with Straight Return Line Fitting
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1991 - Honda Accord | L | 2156 | F22A6 | United States | 4 Cyl 2.2L | EX | - |
- Adj Fuel Press Reg
- Adjustable Fuel Pressure Regulator, Black Anodized, Acura and Honda Inline Flange with Straight Return Line Fitting
- Adjustable Fuel Pressure Regulator;Black
- Adjustable Fuel Pressure Regulator. Black. Acura & Honda Inline Flange with Straight Return Line Fitting
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1991 - Honda Prelude | L | 2056 | B21A1 | United States | 4 Cyl 2.1L | Si ALB | - |
- Adj Fuel Press Reg
- Adjustable Fuel Pressure Regulator, Black Anodized, Acura and Honda Inline Flange with Straight Return Line Fitting
- Adjustable Fuel Pressure Regulator;Black
- Adjustable Fuel Pressure Regulator. Black. Acura & Honda Inline Flange with Straight Return Line Fitting
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1991 - Honda Prelude | L | 2056 | B21A1 | United States | 4 Cyl 2.1L | Si ALB | - |
- w/o Anti-Flicker Harness; Bulb Type H3; Pair
- Silver-Lux LED Kit; w/o Anti-Flicker Harness; Bulb Type H3; Pair;
- Silver-Lux LED Kit
- Product Attributes:
- Industry/OE Number: H3
- WARNING CA Proposition 65: Yes
-
Features:
- Custom Designed Aluminum Tower
- Clockable Collar Which Allows You To Adjust The Light Beam
- Smaller And Fully Enclosed Driver And Harness Assembly
- 2 Year Warranty
- Silver-lux LED Kit
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - Honda Prelude |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- with TOYO Radiator
- w/o Fan Blade
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - Honda Prelude |
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1991 - Honda CRX | Rear Left | HF |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Rear Suspension - 1 per Arm
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - Honda Civic |
- Standard Grade Universal Catalytic Converter - 2.00in.
- Cutting and Welding Required
- Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
- Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2
- Sensor Port Count: 0
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53004 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Honda CRX | L | 1588 | 4 Cyl 1.6L | 98 |
Showing 1 - 10 of 146 products
Loading...