Image
Product
Price
- 11 x 1 1/8-10 Spline
- Replacement clutch set 1955-85 GM Diaphragm 11 x 1 1/8-10
- Replacement Clutch Set
-
Features:
- Replacement Clutch Set
- OEM Quality Replacement Components
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
- RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1981 - GMC Jimmy | V | - | 8 Cyl 5.7L | 350 |
- Powergrip clutch set
- 11 x 1 1/8-10 Spline
- Powergrip clutch set 1955-85 GM 11 Diaphragm 1 1/8-10
- Powergrip Clutch Set
-
Features:
- Effectively Increase The Clutch Capacity To The 550 HP Level
- 8 Spring Hub Is Equipped w/Ram Polycoil Damper Springs
- 900/300 Series Friction Material Has Great Drivability
- Meets SFI Specifications
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
- As power levels move up to and beyond 500 horsepower. RAM POWERGRIP meets the challenge with a combination of organic and metallic disc friction surfaces that effectively increase the clutch capacity to the 550 horsepower level. The 8-spring hub is equipped with RAM POLYCOIL damper springs encapsulated in polyurethane. This spring can handle three times the shock load of just the coil spring, and is standard in all RAM competition discs. The RAM Competition pressure plate in this kit provides 30% more clamp pressure than stock, and meets SFI specifications. At this high level of performance RAM POWERGRIP provides surprisingly good driving characteristics with smooth, comfortable driver control. Sets include pressure plate, disc, release bearing, and alignment tool unless otherwise noted.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1981 - GMC C2500 | V | - | 8 Cyl 5.7L | 350 |
- pilot bushing/bearing
- 0.592 in. ID; 1.094 in. OD; 0.75 in. Length
- Pilot bushing/bearing AMC; General Motors; Jeep
- Product Attributes:
- Inside Diameter: 0.592 In.
-
Features:
- Pilot Bushing/Bearing
- Strictly Factory Warranty Only
- Premium replacement pilot bearings and bushings complete your clutch install for a long, trouble free life of operation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1981 - GMC K3500 | V | - | 8 Cyl 7.4L | 454 |
- steel flywheel
- 168 Teeth; Zero Balance
- Steel flywheel Chevy 1955-85/262-427/0 bal./168T
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1981 - GMC C1500 | V | - | 8 Cyl 5.0L | 305 |
- Easy fit Cover, 4 Layer; Fits Standard Cab Trucks; Incl Lock, Cable, Bag
- Standard Cab Easy fit Truck Cover 4 Layer; Fits Standard Cab Trucks; Includes Lock, Cable, and Storage Bag
- Product Attributes:
- Configuration: One Piece
- Size: Fits Standard Cab Trucks
- Prop 65 Short Form Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Soft And Durable Diamond Bond Pattern
- Unique 4-Layer Breathable Material
- Ultraviolet Protection Against Sun And Heat
- Polypropylene Layers Repel Water
- Side Grommets For Tie Downs
- Includes Free Locking Cable And Storage Bag
- Indoor And Outdoor Usage
- The Standard Cab Easy fit truck cover is made of a 4-layer non-woven polypropylene material which is breathable and repels water without trapping moisture. The soft and durable backing pampers the paint finish and protects your truck from the sun's UV rays, dirt, dust, moisture and pollution. Double stitched elastic hem around the bottom of the covers along with pre-installed side eyelets are used to secure the cover with the lock and cable. Includes grommet kit for antenna allowances.
Additional Fitment Information:
| Vehicle | Body |
|---|---|
| 1981 - GMC C2500 | Standard Cab Pickup |
- Headlight Conversion Kit
- Headlight Conversion Kit
- Product Attributes:
- Shape: Rectangular
- Prop 65 Short Form Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Multi Surface Reflectors and Clear Glass Lens
- Die Cast Aluminum Housing Quickly Dissipates Heat
- Produces A Sixty Percent More Luminous Beam
- Complex Reflector For Wider/Longer Beam Pattern
- Sold In Pairs
- Compatible With Most Factory Harnesses
- SAE/DOT Approved
- Halogen conversion headlight kit with advanced multi surface reflector and clear glass lens. These headlights produce 60% more luminous beam than conventional OEM sealed beam headlamps. Made from a durable die cast aluminum reflector for more reliable quality and improved beam output. They are SAE/DOT approved for street legal use. Includes replaceable H4, 12V street legal 55/60 watt bulbs and will also accept off road bulbs up to 130 watts. Easy install for all replacement factory 7-inch round or 200mm rectangle headlamps. Also compatible with most factory harness and hardware for most street applications (50/60w). Lighting upgrade for most factory sealed beam applications -autos, trucks, SUV's, motorcycles, vintage vehicles and hot rods.
Additional Fitment Information:
| Vehicle |
|---|
| 1981 - GMC C2500 Suburban |
- HDX clutch set
- 11 x 1 1/8-10 Spline
- HDX clutch set 1955-85 GM Diaphragm 11 x 1 1/8-10
- HDX Clutch Set
-
Features:
- Built With 30 Percent More Clamp Pressure Than Stock
- Smooth
- Chatter Free Operation
- Premium Organic Composite Disc Friction Material
- Exclusive 8-Spring Hub Assembly Where Applicable
- Great Drivability
- Use For Power Levels To 450 HP
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
- The basic RAM concept of clutch performance is simple: Increased clamp pressure is the single most effective way to manage high horsepower or load, especially in street driven performance cars. We purpose build RAM HDX pressure plates with 30% more clamp pressure than stock. The second important feature is smooth, chatter free operation, which we achieve with premium organic composite disc friction material. Also, HDX discs feature our exclusive 8-spring hub assembly for added load capacity. HDX. Great driveability and control for power levels to 450 horsepower. Sets include pressure plate, disc, release bearing, and alignment tool unless otherwise noted.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1981 - GMC C2500 | V | - | 8 Cyl 5.7L | 350 |
Showing 1 - 7 of 7 products
Loading...