Shop By Product Matching "Ram"
Choose a Model for your 2012 Ford
Image
Product
Price
- steel flywheel
- 0 Balance; 164 Teeth; 8 Bolt; 10.5 And 11 Ford Diaphragm; 11 long style
- Steel flywheel Ford 4.6L/96-07/0 bal./164T/8 bolt/10.5/11 Ford Diaphragm/11 long style
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - Ford Mustang | V | 4951 | 8 Cyl 5.0L | GT | 302 |
- Dodge; Ford; Ram Truck Tool Box
- L 72 in. x W 19.25 in. x H 13.5 in.; Single Lid; Low Profile; Matte Black
- UWS TBS-72-LP-MB Matte Black Aluminum 72in. Truck Tool Box with Low Profile (LTL Shipping Only)
- 72 in. Crossover Truck Tool Box
- Product Attributes:
- Sales Family Description: Work Boxes
- Profile: Low
- Tariff 301: No
- Tub Style: Standard
- WARNING CA Proposition 65: Yes
- Lid Type: Single
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Lead; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Rails Included: No
- Sales Group Description: Crossover Toolbox
- Latch Type: Paddle Handles
- Opening Type: Single Lid
-
Features:
- RigidCore Foam Filled Lid To Maximize Power And Prevent Binding
- Built Lower On The Bed Rail For Better View Out The Rear Window
- 0.058 in. Extra Thick / One Piece Aluminum Tub Holds Heavy Tools
- Stainless Steel Lock Handles For Corrosion Resistant Operation
- Connects Rod Allows For Convenient Operation From Driver Side
- Interior Rod Enclosure Prevents Bending Or Jamming Of Lock System
- Widespread Handles Are Easy To Reach From Either Side Of Truck
- MicroSeal Gasket Helps Seal Out Moisture / Dust And Dirt
- Lids Self Open For Convenient Operation And Loading
- Tool Trays And Built-In Screwdriver Holders For Easy Organization
- Three Compartment Sliding Tray For Convenient Small Item Storage
- Includes Box And Mounting Hardware
- UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. This particular truck tool box features a low profile, meaning the lid is built lower than our standard lid. This provides a better view out the rear cab window and additional clearance for other items in the truck bed, if needed. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability.
Additional Fitment Information:
| Vehicle | Bed |
|---|---|
| 2012 - Ford F-250 Super Duty | Fleetside |
- Dodge; Ford; Ram Truck Tool Box
- L 72 in. x W 19.25 in. x H 13.5 in.; Matte Black Dually Bed
- UWS TBS-72-LP-MB Matte Black Aluminum 72in. Truck Tool Box with Low Profile (LTL Shipping Only)
- Low Profile Series Single Lid Crossover Tool Box
- Product Attributes:
- Sales Family Description: Work Boxes
- Profile: Low
- Tariff 301: No
- Tub Style: Standard
- WARNING CA Proposition 65: Yes
- Lid Type: Single
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Lead; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Rails Included: No
- Sales Group Description: Crossover Toolbox
- Latch Type: Paddle Handles
- Opening Type: Single Lid
-
Features:
- RigidCore Foam Filled Lid To Maximize Power And Prevent Binding
- Built Lower On The Bed Rail For Better View Out The Rear Window
- 0.058 in. Extra Thick / One Piece Aluminum Tub Holds Heavy Tools
- Stainless Steel Lock Handles For Corrosion Resistant Operation
- Connects Rod Allows For Convenient Operation From Driver Side
- Interior Rod Enclosure Prevents Bending Or Jamming Of Lock System
- Widespread Handles Are Easy To Reach From Either Side Of Truck
- MicroSeal Gasket Helps Seal Out Moisture / Dust And Dirt
- Lids Self Open For Convenient Operation And Loading
- Tool Trays And Built-In Screwdriver Holders For Easy Organization
- Three Compartment Sliding Tray For Convenient Small Item Storage
- Includes Box And Mounting Hardware
- UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. This particular truck tool box features a low profile, meaning the lid is built lower than our standard lid. This provides a better view out the rear cab window and additional clearance for other items in the truck bed, if needed. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability.
Additional Fitment Information:
| Vehicle | Bed |
|---|---|
| 2012 - Ford F-350 Super Duty | Fleetside |
- Dodge; Ford; Ram Truck Tool Box
- L 72 in. x W 19.25 in. x H 13.5 in.; Single Lid; Matte Black
- UWS TBS-72-MB Matte Black Aluminum 72in. Crossover Truck Tool Box (LTL Shipping Only)
- 72 in. Crossover Truck Tool Box
- Product Attributes:
- Sales Family Description: Work Boxes
- Profile: Standard
- Tariff 301: No
- Tub Style: Standard
- WARNING CA Proposition 65: Yes
- Lid Type: Single
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Lead; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Rails Included: No
- Sales Group Description: Crossover Toolbox
- Latch Type: Paddle Handles
- Opening Type: Single Lid
-
Features:
- RigidCore Foam Filled Lid To Maximize Power And Prevent Binding
- 0.058 in. Extra Thick / One Piece Aluminum Tub Holds Heavy Tools
- Stainless Steel Lock Handles For Corrosion Resistant Operation
- Connects Rod Allows For Convenient Operation From Driver Side
- Interior Rod Enclosure Prevent Bending Or Jamming Of Lock System
- Widespread Handles Are Easy To Reach From Either Side Of Truck
- MicroSeal Gasket Helps Seal Out Moisture / Dust And Dirt
- Lids Self Open For Convenient Operation And Loading
- Tool Trays And Built In Screwdriver Holders For Easy Organization
- Three Compartment Sliding Tray For Convenient Small Item Storage
- Multiple Box Sizes Available For Custom Fit On Each Truck Vehicle
- Includes Box And Mounting Hardware
- UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability.
Additional Fitment Information:
| Vehicle | Bed |
|---|---|
| 2012 - Ford F-250 Super Duty | Fleetside |
- Dodge; Ford; Ram Truck Tool Box
- L 72 in. x W 19.25 in. x H 13.5 in.; Single Lid; Matte Black Dually Bed
- UWS TBS-72-MB Matte Black Aluminum 72in. Crossover Truck Tool Box (LTL Shipping Only)
- 72 in. Crossover Truck Tool Box
- Product Attributes:
- Sales Family Description: Work Boxes
- Profile: Standard
- Tariff 301: No
- Tub Style: Standard
- WARNING CA Proposition 65: Yes
- Lid Type: Single
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Lead; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Rails Included: No
- Sales Group Description: Crossover Toolbox
- Latch Type: Paddle Handles
- Opening Type: Single Lid
-
Features:
- RigidCore Foam Filled Lid To Maximize Power And Prevent Binding
- 0.058 in. Extra Thick / One Piece Aluminum Tub Holds Heavy Tools
- Stainless Steel Lock Handles For Corrosion Resistant Operation
- Connects Rod Allows For Convenient Operation From Driver Side
- Interior Rod Enclosure Prevent Bending Or Jamming Of Lock System
- Widespread Handles Are Easy To Reach From Either Side Of Truck
- MicroSeal Gasket Helps Seal Out Moisture / Dust And Dirt
- Lids Self Open For Convenient Operation And Loading
- Tool Trays And Built In Screwdriver Holders For Easy Organization
- Three Compartment Sliding Tray For Convenient Small Item Storage
- Multiple Box Sizes Available For Custom Fit On Each Truck Vehicle
- Includes Box And Mounting Hardware
- UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability.
Additional Fitment Information:
| Vehicle | Bed |
|---|---|
| 2012 - Ford F-350 Super Duty | Fleetside |
- Dodge; Ford; Ram Truck Tool Box
- L 72 in. x W 19.25 in. x H 13.5 in.; Matte Black Dually Bed
- UWS TBS-72-MB Matte Black Aluminum 72in. Crossover Truck Tool Box (LTL Shipping Only)
- Single Lid Series Tool Box
- Product Attributes:
- Sales Family Description: Work Boxes
- Profile: Standard
- Tariff 301: No
- Tub Style: Standard
- WARNING CA Proposition 65: Yes
- Lid Type: Single
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Lead; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Rails Included: No
- Sales Group Description: Crossover Toolbox
- Latch Type: Paddle Handles
- Opening Type: Single Lid
-
Features:
- RigidCore Foam Filled Lid To Maximize Power And Prevent Binding
- 0.058 in. Extra Thick / One Piece Aluminum Tub Holds Heavy Tools
- Stainless Steel Lock Handles For Corrosion Resistant Operation
- Connects Rod Allows For Convenient Operation From Driver Side
- Interior Rod Enclosure Prevent Bending Or Jamming Of Lock System
- Widespread Handles Are Easy To Reach From Either Side Of Truck
- MicroSeal Gasket Helps Seal Out Moisture / Dust And Dirt
- Lids Self Open For Convenient Operation And Loading
- Tool Trays And Built In Screwdriver Holders For Easy Organization
- Three Compartment Sliding Tray For Convenient Small Item Storage
- Multiple Box Sizes Available For Custom Fit On Each Truck Vehicle
- Includes Box And Mounting Hardware
- UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability.
Additional Fitment Information:
| Vehicle | Bed |
|---|---|
| 2012 - Ford F-350 Super Duty | Fleetside |
- Dodge; Ford; Ram Truck Tool Box
- L 72 in. x W 19.25 in. x H 13.5 in.; Black
- UWS TBS-72-LP-BLK Gloss Black Aluminum 72in. Truck Tool Box with Low Profile (LTL Shipping Only)
- Low Profile Series Single Lid Crossover Tool Box
- Product Attributes:
- Sales Family Description: Work Boxes
- Profile: Low
- Tariff 301: No
- Tub Style: Standard
- WARNING CA Proposition 65: Yes
- Lid Type: Single
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Lead; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Rails Included: No
- Sales Group Description: Crossover Toolbox
- Latch Type: Paddle Handles
- Opening Type: Single Lid
-
Features:
- RigidCore Foam Filled Lid To Maximize Power And Prevent Binding
- Built Lower On The Bed Rail For Better View Out The Rear Window
- 0.058 in. Extra Thick / One Piece Aluminum Tub Holds Heavy Tools
- Stainless Steel Lock Handles For Corrosion Resistant Operation
- Connects Rod Allows For Convenient Operation From Driver Side
- Interior Rod Enclosure Prevents Bending Or Jamming Of Lock System
- Widespread Handles Are Easy To Reach From Either Side Of Truck
- MicroSeal Gasket Helps Seal Out Moisture / Dust And Dirt
- Lids Self Open For Convenient Operation And Loading
- Tool Trays And Built-In Screwdriver Holders For Easy Organization
- Three Compartment Sliding Tray For Convenient Small Item Storage
- Includes Box And Mounting Hardware
- UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. This particular truck tool box features a low profile, meaning the lid is built lower than our standard lid. This provides a better view out the rear cab window and additional clearance for other items in the truck bed, if needed. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability.
Additional Fitment Information:
| Vehicle | Bed |
|---|---|
| 2012 - Ford F-250 Super Duty | Fleetside |
- Dodge; Ford; Ram Truck Tool Box
- L 72 in. x W 19.25 in. x H 13.5 in.; Black Dually Bed
- UWS TBS-72-LP-BLK Gloss Black Aluminum 72in. Truck Tool Box with Low Profile (LTL Shipping Only)
- Low Profile Series Single Lid Crossover Tool Box
- Product Attributes:
- Sales Family Description: Work Boxes
- Profile: Low
- Tariff 301: No
- Tub Style: Standard
- WARNING CA Proposition 65: Yes
- Lid Type: Single
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Lead; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Rails Included: No
- Sales Group Description: Crossover Toolbox
- Latch Type: Paddle Handles
- Opening Type: Single Lid
-
Features:
- RigidCore Foam Filled Lid To Maximize Power And Prevent Binding
- Built Lower On The Bed Rail For Better View Out The Rear Window
- 0.058 in. Extra Thick / One Piece Aluminum Tub Holds Heavy Tools
- Stainless Steel Lock Handles For Corrosion Resistant Operation
- Connects Rod Allows For Convenient Operation From Driver Side
- Interior Rod Enclosure Prevents Bending Or Jamming Of Lock System
- Widespread Handles Are Easy To Reach From Either Side Of Truck
- MicroSeal Gasket Helps Seal Out Moisture / Dust And Dirt
- Lids Self Open For Convenient Operation And Loading
- Tool Trays And Built-In Screwdriver Holders For Easy Organization
- Three Compartment Sliding Tray For Convenient Small Item Storage
- Includes Box And Mounting Hardware
- UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. This particular truck tool box features a low profile, meaning the lid is built lower than our standard lid. This provides a better view out the rear cab window and additional clearance for other items in the truck bed, if needed. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability.
Additional Fitment Information:
| Vehicle | Bed |
|---|---|
| 2012 - Ford F-350 Super Duty | Fleetside |
- Dodge; Ford; Ram Truck Tool Box
- L 72 in. x W 19.25 in. x H 13.5 in.; Single Lid; Low Profile; Black
- UWS TBS-72-LP-BLK Gloss Black Aluminum 72in. Truck Tool Box with Low Profile (LTL Shipping Only)
- 72 in. Crossover Truck Tool Box
- Product Attributes:
- Sales Family Description: Work Boxes
- Profile: Low
- Tariff 301: No
- Tub Style: Standard
- WARNING CA Proposition 65: Yes
- Lid Type: Single
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Lead; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Rails Included: No
- Sales Group Description: Crossover Toolbox
- Latch Type: Paddle Handles
- Opening Type: Single Lid
-
Features:
- RigidCore Foam Filled Lid To Maximize Power And Prevent Binding
- Built Lower On The Bed Rail For Better View Out The Rear Window
- 0.058 in. Extra Thick / One Piece Aluminum Tub Holds Heavy Tools
- Stainless Steel Lock Handles For Corrosion Resistant Operation
- Connects Rod Allows For Convenient Operation From Driver Side
- Interior Rod Enclosure Prevents Bending Or Jamming Of Lock System
- Widespread Handles Are Easy To Reach From Either Side Of Truck
- MicroSeal Gasket Helps Seal Out Moisture / Dust And Dirt
- Lids Self Open For Convenient Operation And Loading
- Tool Trays And Built-In Screwdriver Holders For Easy Organization
- Three Compartment Sliding Tray For Convenient Small Item Storage
- Includes Box And Mounting Hardware
- UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. This particular truck tool box features a low profile, meaning the lid is built lower than our standard lid. This provides a better view out the rear cab window and additional clearance for other items in the truck bed, if needed. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability.
Additional Fitment Information:
| Vehicle | Bed |
|---|---|
| 2012 - Ford F-250 Super Duty | Fleetside |
- Dodge; Ford; Ram Truck Tool Box
- L 72 in. x W 19.25 in. x H 13.5 in.; Matte Black
- UWS TBS-72-MB Matte Black Aluminum 72in. Crossover Truck Tool Box (LTL Shipping Only)
- Single Lid Series Tool Box
- Product Attributes:
- Sales Family Description: Work Boxes
- Profile: Standard
- Tariff 301: No
- Tub Style: Standard
- WARNING CA Proposition 65: Yes
- Lid Type: Single
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Lead; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Rails Included: No
- Sales Group Description: Crossover Toolbox
- Latch Type: Paddle Handles
- Opening Type: Single Lid
-
Features:
- RigidCore Foam Filled Lid To Maximize Power And Prevent Binding
- 0.058 in. Extra Thick / One Piece Aluminum Tub Holds Heavy Tools
- Stainless Steel Lock Handles For Corrosion Resistant Operation
- Connects Rod Allows For Convenient Operation From Driver Side
- Interior Rod Enclosure Prevent Bending Or Jamming Of Lock System
- Widespread Handles Are Easy To Reach From Either Side Of Truck
- MicroSeal Gasket Helps Seal Out Moisture / Dust And Dirt
- Lids Self Open For Convenient Operation And Loading
- Tool Trays And Built In Screwdriver Holders For Easy Organization
- Three Compartment Sliding Tray For Convenient Small Item Storage
- Multiple Box Sizes Available For Custom Fit On Each Truck Vehicle
- Includes Box And Mounting Hardware
- UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability.
Additional Fitment Information:
| Vehicle | Bed |
|---|---|
| 2012 - Ford F-250 Super Duty | Fleetside |
Showing 1 - 10 of 119 products
Loading...