Image
Product
Price
- Dodge Ram 5.7L Baffled Oil Catch Can, 2009-2018
- Baffled Oil Catch Can, fits Dodge Ram 5.7L 2009-2018
- Product Attributes:
- SellingPoint04: Helps Maintain Proper Octane Levels To Reduce Potential Detonation
- SellingPoint05: Filters And Cans Are Fully Serviceable
- SellingPoint06: Internal Air Diverter Increases Air Turbulence To Improve Oil Separation
- SellingPoint07: 100-percent Billet 6061 Aluminum Sealed Cans
- SellingPoint01: Direct-fit Bracket Mounts Can In Serviceable Location
- SellingPoint02: Single Can Mounting In Line With The Pcv System Separates Oil Particles Using 50-micron Bronze Filter
- SellingPoint03: Larger 7.5 Oz Capacity Extends Time Between Checks
- TechSpec Chassis Codes: N/a
- SellingPoint08: Patent Pending
- SellingPoint09: Mishimoto Lifetime Warranty
- TechSpec Drain Plug Thread Size: N/a
- Finish: Powder Coat
- TechSpec Outlet: N/a
- TechSpec Catch Can Diameter (in): N/a
- Installation Difficulty: 2
- SellingPoint10: N/a
- TechSpec Note: N/a
- TechSpec Installation Notes: N/a
- Prop 65 (C, R or CR): Cr
- Material: 6061 Aluminum
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- TechSpec Height (in): N/a
- SellingPoint14: N/a
- Prop 65 - Short Label: Prop65_warning.jpg
- TechSpec Material: N/a
- TechSpec Applications: N/a
- TechSpec Includes: N/a
- TechSpec Inlet: N/a
-
Features:
- Direct fit for the 2009-2018 Dodge Ram 1500
- Single can mounts in line with the PCV system to separate oil from air
- Patent pending billet 6061 aluminum can sealed with Viton O-rings
- Mishimoto Lifetime Warranty
- Robust, application-specific bracket mounts the can in a serviceable location
- The classic Hemi from Dodge has always been a great engine. But even Dodge couldn't dodge the dangers of engine blow-by. Mishimoto has you covered with our direct-fit, baffled oil catch can kit for the 2009+ Dodge Ram 5.7L V8. This kit provides excellent protection for your engine, keeping the blow-by down to a minimum and lengthening your engine's need for valve servicing. During testing, we quickly discovered that our standard 2oz can was not enough. The amount of blow-by exceeded the can's capacity in under 1000 miles! We had to switch to a larger, 7.5 oz can, so the intervals between draining would last longer and you'd be able to effectively protect your Hemi. Our billet aluminum 7.5 oz can has internal baffling, air diverters, and a 50-micron bronze filter to keep oil out of your intake and carbon deposits off your valves. The bracket included in each kit is made of very strong and thick steel, so vibration will not be something to worry about. With it bolting directly to your radiator support, you'll have a clean OEM look. This kit installs in under 1 hour, is easily serviceable, and comes with our Mishimoto Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2012 - Ram 1500 | United States | Tradesman |
- Dodge Ram 5.7L Baffled Oil Catch Can, 2009-2018
- Baffled Oil Catch Can, fits Dodge Ram 5.7L 2009-2018
- Product Attributes:
- SellingPoint04: Helps Maintain Proper Octane Levels To Reduce Potential Detonation
- SellingPoint05: Filters And Cans Are Fully Serviceable
- SellingPoint06: Internal Air Diverter Increases Air Turbulence To Improve Oil Separation
- SellingPoint07: 100-percent Billet 6061 Aluminum Sealed Cans
- SellingPoint01: Direct-fit Bracket Mounts Can In Serviceable Location
- SellingPoint02: Single Can Mounting In Line With The Pcv System Separates Oil Particles Using 50-micron Bronze Filter
- SellingPoint03: Larger 7.5 Oz Capacity Extends Time Between Checks
- TechSpec Chassis Codes: N/a
- SellingPoint08: Patent Pending
- SellingPoint09: Mishimoto Lifetime Warranty
- TechSpec Drain Plug Thread Size: N/a
- Finish: Powder Coat
- TechSpec Outlet: N/a
- TechSpec Catch Can Diameter (in): N/a
- Installation Difficulty: 2
- SellingPoint10: N/a
- TechSpec Note: N/a
- TechSpec Installation Notes: N/a
- Prop 65 (C, R or CR): Cr
- Material: 6061 Aluminum
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- TechSpec Height (in): N/a
- SellingPoint14: N/a
- Prop 65 - Short Label: Prop65_warning.jpg
- TechSpec Material: N/a
- TechSpec Applications: N/a
- TechSpec Includes: N/a
- TechSpec Inlet: N/a
-
Features:
- Direct fit for the 2009-2018 Dodge Ram 1500
- Single can mounts in line with the PCV system to separate oil from air
- Patent pending billet 6061 aluminum can sealed with Viton O-rings
- Mishimoto Lifetime Warranty
- Robust, application-specific bracket mounts the can in a serviceable location
- The classic Hemi from Dodge has always been a great engine. But even Dodge couldn't dodge the dangers of engine blow-by. Mishimoto has you covered with our direct-fit, baffled oil catch can kit for the 2009+ Dodge Ram 5.7L V8. This kit provides excellent protection for your engine, keeping the blow-by down to a minimum and lengthening your engine's need for valve servicing. During testing, we quickly discovered that our standard 2oz can was not enough. The amount of blow-by exceeded the can's capacity in under 1000 miles! We had to switch to a larger, 7.5 oz can, so the intervals between draining would last longer and you'd be able to effectively protect your Hemi. Our billet aluminum 7.5 oz can has internal baffling, air diverters, and a 50-micron bronze filter to keep oil out of your intake and carbon deposits off your valves. The bracket included in each kit is made of very strong and thick steel, so vibration will not be something to worry about. With it bolting directly to your radiator support, you'll have a clean OEM look. This kit installs in under 1 hour, is easily serviceable, and comes with our Mishimoto Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2012 - Ram 1500 | Express |
- Dodge 6.7L Cummins Intercooler Kit
- Intercooler Kit, fits Dodge 6.7L Cummins 2010-2012
- Product Attributes:
- SellingPoint04: 3-in Core Is 100-percent Thicker Than Stock
- TechSpec Pipe Shape: N/a
- SellingPoint05: End Tanks Strategically Designed For Optimal Airflow
- SellingPoint06: Internal Fins Designed For Maximum Heat Transfer With Minimal Pressure Drop
- SellingPoint07: Aluminum Intercooler Pipes Replace Weak Factory Plastic Cold-side Pipe And Small Diameter Hot-side Pipe
- SellingPoint01: Direct Fit, Mounts In The Stock Location
- SellingPoint02: Bar-and-plate Construction With Cast Aluminum End Tanks
- TechSpec Maximum Recommended Horsepower: N/a
- TechSpec Overall Length (in): 38.75
- SellingPoint03: 52-percent Greater Internal Volume Than Stock
- TechSpec Centerline Radius: N/a
- TechSpec Chassis Codes: N/a
- TechSpec Pipe Length: N/a
- SellingPoint08: Provides Improved Airflow And Lowers Intake Air Temperatures
- SellingPoint09: Mandrel-bent Polished Aluminum Pipe Eliminates Restrictive Bends
- TechSpec Core Type: Bar-and-plate
- TechSpec Core Height (in): 26.7
- TechSpec Maximum Recommended Boost Pressure (PSI): N/a
- TechSpec Core Thickness (in): 3.15
- TechSpec Pipe Diameter: N/a
- SellingPoint10: Includes Mishimoto Silicone Boots With Duracore Technology And Mishimoto Constant Tension T-bolt Clamps
- TechSpec Note: Disconnecting The Ac Lines Is Necessary To Remove The Stock Intercooler. It Is Recommended That The Vehicle Is Taken To A Certified Ac Repair Shop To Have The Ac Refrigerant Properly Evacuated Before Removing Any Stock Intercooler Components.----relocatio
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- Install Difficulty: 4
- SellingPoint11: Sleek Silver Or Stealth Black Intercooler Options Available
- SellingPoint12: Mishimoto Lifetime Warranty
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 26.3
- TechSpec Overall Height (in): 28.75
- TechSpec Applications: 2010-2012 Dodge Ram 2500 W/ 6.7l Cummins Engine--2010-2012 Dodge Ram 3500 W/ 6.7l Cummins Engine--2010-2012 Dodge Chassis Cab W/ 6.7l Cummins Engine
- TechSpec Includes: (1) Mishimoto Intercooler--(1) Air Diversion Panel--(4) Silicone Boots With Duracore Technology--(8) Constant-tension T-bolt Clamps--(2) Aluminum Pipes--(2) Aluminum Mishimoto M Logo Badges--mishimoto Lifetime Warranty
- TechSpec Weight (lbs): N/a
- TechSpec Inlet (in): 3.5
- TechSpec Overall Width (in): 11
- TechSpec Outlet (in): 3.5
-
Features:
- Direct fit, mounts in the stock location
- Bar-and-plate construction with cast aluminum end tanks
- 52% greater internal volume than stock
- 3" core is 100% thicker than stock
- End tanks strategically designed for optimal airflow
- Internal fins designed for maximum heat transfer with minimal pressure drop
- Aluminum intercooler pipes replace weak factory plastic cold-side pipe and small diameter hot-side pipe
- Provides improved airflow and lowers intake air temperatures
- Mandrel-bent polished aluminum pipe eliminates restrictive bends
- Includes Mishimoto Silicone Boots with DuraCore™ technology and Mishimoto Constant Tension T-bolt Clamps
- Sleek Silver or Stealth Black intercooler options available
- Mishimoto Lifetime Warranty
- our engineers have maximized airflow by eliminating restrictive bends, allowing for a smooth and unimpeded airflow. The piping is constructed of mandrel bent 3.5in aluminum polished to a mirror finish. This kit includes Mishimoto silicone boots with DuraCore technology and constant-tension T-bolt clamps for accurate and consistent holding force. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. This package is rounded out with the Mishimoto intercooler featuring extremely durable cast aluminum end tanks and a bar-and-plate core, all designed to provide cool, dense air to your engine. Our intercooler features an increase in core volume and reduces pressure drop, which results in an overall increase in engine efficiency. All the components in this kit are engineered to last, just like your truck. Offered with either a black or silver core, the Mishimoto 6.7L Cummins intercooler kit is protected by our signature lifetime warranty.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2012 - Ram 2500 | ST |
- Dodge 6.7L Cummins Intercooler
- Intercooler, fits Dodge 6.7L Cummins 2010-2012
- Product Attributes:
- SellingPoint04: 3-in Core Is 100-percent Thicker Than Stock
- TechSpec Pipe Shape: N/a
- SellingPoint05: End Tanks Strategically Designed For Optimal Airflow
- SellingPoint06: Internal Fins Designed For Maximum Heat Transfer With Minimal Pressure Drop
- SellingPoint07: Includes Transition Couplers For Use With Mishimoto 6.7l Cummins Intercooler Pipe And Boot Kit Or Factory Intercooler Pipes
- SellingPoint01: Direct Fit, Mounts In The Stock Location
- SellingPoint02: Bar-and-plate Construction With Cast Aluminum End Tanks
- TechSpec Maximum Recommended Horsepower: N/a
- TechSpec Overall Length (in): 38.75
- SellingPoint03: 52-percent Greater Internal Volume Than Stock
- TechSpec Centerline Radius: N/a
- TechSpec Chassis Codes: N/a
- TechSpec Pipe Length: N/a
- SellingPoint08: Sleek Silver Or Stealth Black Intercooler Options Available
- SellingPoint09: Provides Improved Airflow And Lowers Intake Air Temperatures
- TechSpec Core Type: Bar-and-plate
- TechSpec Core Height (in): 26.7
- TechSpec Maximum Recommended Boost Pressure (PSI): N/a
- TechSpec Core Thickness (in): N/a
- TechSpec Pipe Diameter: N/a
- SellingPoint10: Mishimoto Lifetime Warranty
- TechSpec Note: Disconnecting The Ac Lines Is Necessary To Remove The Stock Intercooler. It Is Recommended That The Vehicle Is Taken To A Certified Ac Repair Shop To Have The Ac Refrigerant Properly Evacuated Before Removing Any Stock Intercooler Components.----relocatio
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- Install Difficulty: 4
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 26.3
- TechSpec Overall Height (in): 28.75
- TechSpec Applications: 2010-2012 Dodge Ram 2500 W/ 6.7l Cummins Engine--2010-2012 Dodge Ram 3500 W/ 6.7l Cummins Engine--2010-2012 Dodge Chassis Cab W/ 6.7l Cummins Engine
- TechSpec Includes: (1) Mishimoto Intercooler--air Diversion Panel--(2) Silicone Boots With Duracore Technology--(4) Constant-tension T-bolt Clamps--mishimoto Lifetime Warranty
- TechSpec Weight (lbs): N/a
- TechSpec Inlet (in): 3.5
- TechSpec Overall Width (in): 11
- TechSpec Outlet (in): 3.5
-
Features:
- Direct fit, mounts in the stock location
- Bar-and-plate construction with cast aluminum end tanks
- 52% greater internal volume than stock
- 3” core is 100% thicker than stock
- End tanks strategically designed for optimal airflow
- Internal fins designed for maximum heat transfer with minimal pressure drop
- Includes transition couplers for use with Mishimoto 6.7L Cummins intercooler pipe and boot kit or factory intercooler pipes
- Sleek Silver or Stealth Black intercooler options available
- Provides improved airflow and lowers intake air temperatures
- Mishimoto Lifetime Warranty
- The Dodge Cummins inline-6 is well known for its smooth power delivery and engine longevity. Mishimoto has released an intercooler for the 2010-2012 6.7L Cummins that is built to last, just like your truck. The Mishimoto intercooler is manufactured with robust cast aluminum end tanks and a dense bar-and-plate core. This intercooler provides decreased intake temperatures, improved airflow, and reduced pressure loss. Our engineers developed an intercooler with increased core volume that can support substantial boost pressures and lower EGTs in your stock or modified truck. The Mishimoto intercooler features larger than factory intercooler outlets for increased flow. Included with this intercooler are two silicone boots with DuraCore technology and our signature constant tension T-bolt clamps for consistent and reliable holding power. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel and oil. This effectively increases the life of our boots by preventing leaks and blow-outs. Offered in black or silver, the Mishimoto 6.7L Cummins intercooler is protected by our signature lifetime warranty
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2012 - Ram 2500 | SLT |
- Aluminum Transmission Pan, fits Dodge Ram 6.7L Cummins 2007.5+
- Aluminum Transmission Pan, fits Dodge Ram 6.7L Cummins 2007.5+
- Product Attributes:
- SellingPoint04: Bolt Retainers Hold Fasteners In Place For Easy Installation
- SellingPoint05: Internal Baffles Reduce Sloshing And Enhance Heat Dissipation For Smoother, More Efficient Transmission Operation
- SellingPoint06: 1/8-inch Npt Port Makes Adding A Temp Sensor Fast And Easy
- TechSpec Overall Length (in): N/a
- SellingPoint07: Precision-machined Sealing Surface Helps Prevent Leaks
- SellingPoint01: Direct Fit For 2007.5+ Dodge Ram 6.7l Cummins
- SellingPoint02: Durable Cast-aluminum Construction For Long-lasting Performance
- SellingPoint03: Increases Fluid Capacity By 2.6 Quarts Over The Stock Transmission Pan For More Cooling Capacity
- TechSpec Chassis Codes: N/a
- SellingPoint08: Magnetic Drain Plug Makes Servicing Your Transmission A Breeze
- SellingPoint09: Gunmetal Gray Powder Coat Finish Adds Style And Function To Your Truck’s Undercarriage
- TechSpec Outlet: N/a
- TechSpec Core Height (in): N/a
- TechSpec Core Thickness (in): N/a
- SellingPoint10:
- Mishimoto Lifetime Warranty
- Patent Number Pat001135
- TechSpec Note: N/a
- TechSpec Installation Notes: Drain Plug Torque Spec: 15 Lb-ft----a Pan Gasket Is Not Included With This Product. Mishimoto Recommends Replacing It With Oem Part #68425659aa To Ensure Leak-free Operation.
- SellingPoint15: N/a
- Install Difficulty: 1
- SellingPoint11: Mishimoto Lifetime Warranty
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): N/a
- TechSpec Overall Height (in): N/a
- TechSpec Fluid Capacity (qts): 2.6 (pan)/ 8.1 (total 4x2)/ 9.1 (total 4x4)
- TechSpec Caution: N/a
- TechSpec Applications: 2007.5+ Dodge Ram 6.7l Cummins 68rfe
- TechSpec Includes: (1) Cast Aluminum Transmission Pan--(1) Magnetic Drain Plug--(15) Silicone Bolt Retainers--(15) Socket Head Cap Screws W/ Washers--(1) 1/8-in Npt Plug--mishimoto Lifetime Warranty
- TechSpec Rows: N/a
- TechSpec Inlet: N/a
- TechSpec Core Construction: N/a
- TechSpec Overall Width (in): N/a
- This Mishimoto Aluminum Transmission Pan is a direct-fit, high-performance upgrade for your 2007.5+ Dodge Ram 6.7L Cummins. Cast from high-quality aluminum and powder coated Gunmetal Gray, our transmission pan is a robust and long-lasting upgrade for your vehicle's transmission. With a sleek design and bottom ribs, this pan not only adds to the overall aesthetic of your truck but also provides improved cooling performance.----This transmission pan features internal baffles that reduce sloshing and enhance heat dissipation, resulting in smoother transmission performance. Our casting features a precision-machined sealing surface, ready to accept either a factory-style gasket or sealant of your choice (not included). Additionally, the Mishimoto 2007.5+ Dodge Ram 6.7L Cummins Aluminum Transmission Pan adds an extra 2.6 quarts of ATF to help maintain optimal transmission operation.----Fed up with the frustration of trying to hold up a transmission pan with one hand while threading the fasteners in with the other? Mishimoto has you covered with pre-installed bolt retainers that hold the fasteners in the pan, allowing you to easily thread the bolts without dropping them on the ground, your head, or worse, that pan of nasty transmission fluid you just drained. Additionally, our pan comes equipped with a magnetic drain plug for easy draining and a 1/8-inch NPT port and plug for temperature sensors to make servicing your transmission and monitoring temperatures a breeze.----This direct-fit upgrade offers affordable durability and helps maintain smooth transmission operation, ensuring a long life for your transmission. Like all Mishimoto products, this transmission pan is backed by the Mishimoto Lifetime Warranty.
This Part Fits the Following OEM/Substitute Numbers:
5013681AA, MH68RFE-A
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Ram 3500 | L | - | DIESEL | 6 Cyl 6.7L | 408 |
- Dodge 6.7L Cummins Intercooler Kit
- Intercooler Kit, fits Dodge 6.7L Cummins 2010-2012
- Product Attributes:
- SellingPoint04: 3-in Core Is 100-percent Thicker Than Stock
- TechSpec Pipe Shape: N/a
- SellingPoint05: End Tanks Strategically Designed For Optimal Airflow
- SellingPoint06: Internal Fins Designed For Maximum Heat Transfer With Minimal Pressure Drop
- SellingPoint07: Aluminum Intercooler Pipes Replace Weak Factory Plastic Cold-side Pipe And Small Diameter Hot-side Pipe
- SellingPoint01: Direct Fit, Mounts In The Stock Location
- SellingPoint02: Bar-and-plate Construction With Cast Aluminum End Tanks
- TechSpec Maximum Recommended Horsepower: N/a
- TechSpec Overall Length (in): 38.75
- SellingPoint03: 52-percent Greater Internal Volume Than Stock
- TechSpec Centerline Radius: N/a
- TechSpec Chassis Codes: N/a
- TechSpec Pipe Length: N/a
- SellingPoint08: Provides Improved Airflow And Lowers Intake Air Temperatures
- SellingPoint09: Mandrel-bent Polished Aluminum Pipe Eliminates Restrictive Bends
- TechSpec Core Type: Bar-and-plate
- TechSpec Core Height (in): 26.7
- TechSpec Maximum Recommended Boost Pressure (PSI): N/a
- TechSpec Core Thickness (in): 3.15
- TechSpec Pipe Diameter: N/a
- SellingPoint10: Includes Mishimoto Silicone Boots With Duracore Technology And Mishimoto Constant Tension T-bolt Clamps
- TechSpec Note: Disconnecting The Ac Lines Is Necessary To Remove The Stock Intercooler. It Is Recommended That The Vehicle Is Taken To A Certified Ac Repair Shop To Have The Ac Refrigerant Properly Evacuated Before Removing Any Stock Intercooler Components.----relocatio
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- Install Difficulty: 4
- SellingPoint11: Sleek Silver Or Stealth Black Intercooler Options Available
- SellingPoint12: Mishimoto Lifetime Warranty
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 26.3
- TechSpec Overall Height (in): 28.75
- TechSpec Applications: 2010-2012 Dodge Ram 2500 W/ 6.7l Cummins Engine--2010-2012 Dodge Ram 3500 W/ 6.7l Cummins Engine--2010-2012 Dodge Chassis Cab W/ 6.7l Cummins Engine
- TechSpec Includes: (1) Mishimoto Intercooler--(1) Air Diversion Panel--(4) Silicone Boots With Duracore Technology--(8) Constant-tension T-bolt Clamps--(2) Aluminum Pipes--(2) Aluminum Mishimoto M Logo Badges--mishimoto Lifetime Warranty
- TechSpec Weight (lbs): N/a
- TechSpec Inlet (in): 3.5
- TechSpec Overall Width (in): 11
- TechSpec Outlet (in): 3.5
-
Features:
- Direct fit, mounts in the stock location
- Bar-and-plate construction with cast aluminum end tanks
- 52% greater internal volume than stock
- 3" core is 100% thicker than stock
- End tanks strategically designed for optimal airflow
- Internal fins designed for maximum heat transfer with minimal pressure drop
- Aluminum intercooler pipes replace weak factory plastic cold-side pipe and small diameter hot-side pipe
- Provides improved airflow and lowers intake air temperatures
- Mandrel-bent polished aluminum pipe eliminates restrictive bends
- Includes Mishimoto Silicone Boots with DuraCore™ technology and Mishimoto Constant Tension T-bolt Clamps
- Sleek Silver or Stealth Black intercooler options available
- Mishimoto Lifetime Warranty
- our engineers have maximized airflow by eliminating restrictive bends, allowing for a smooth and unimpeded airflow. The piping is constructed of mandrel bent 3.5in aluminum polished to a mirror finish. This kit includes Mishimoto silicone boots with DuraCore technology and constant-tension T-bolt clamps for accurate and consistent holding force. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. This package is rounded out with the Mishimoto intercooler featuring extremely durable cast aluminum end tanks and a bar-and-plate core, all designed to provide cool, dense air to your engine. Our intercooler features an increase in core volume and reduces pressure drop, which results in an overall increase in engine efficiency. All the components in this kit are engineered to last, just like your truck. Offered with either a black or silver core, the Mishimoto 6.7L Cummins intercooler kit is protected by our signature lifetime warranty.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2012 - Ram 2500 | Outdoorsman |
- Dodge Ram 2500/3500 6.7L Cummins Transmission Cooler, Fits 2010-2012
- Dodge Ram 2500/3500 6.7L Cummins Transmission Cooler, Fits 2010-2012
- Product Attributes:
- SellingPoint04: Works With Stock And Mishimoto Transmission Coolers
- SellingPoint05: 86% Increase In External Fin Area For Improved Heat Dissipation
- SellingPoint06: Tube And Fin Design Perfect For Heavy Towing And Rapid Load Changes
- TechSpec Overall Length (in): 22.48
- SellingPoint07: Mishimoto Lifetime Warranty
- SellingPoint01: Direct Fit For The 2010-2012 Dodge 2500/3500 6.7l Cummins
- SellingPoint02: Available Optional Line Kit To Bypass Oem Cooler And Integrated A/c Condenser [hyperlink To Mmtc-ram-10lk]
- SellingPoint03: 60% Increase In Core Volume For Superior Cooling Capability
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Outlet: 1/2"
- TechSpec Core Height (in): 6.18
- TechSpec Core Thickness (in): 1.26
- SellingPoint10: N/a
- TechSpec Note: Available Optional Line Kit To Bypass Oem Cooler And Integrated A/c Condenser: Mmtc-ram-10lk
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 19.29
- TechSpec Overall Height (in): 7.87
- TechSpec Fluid Capacity (qts): 0.7
- TechSpec Caution: N/a
- TechSpec Applications: Dodge Ram 2500 5.7l V8 2010--dodge Ram 2500 6.7l L6 2010--dodge Ram 3500 6.7l L6 2010--ram 2500 6.7l L6 2011-2013--ram 2500 5.7l V8 2011-2012--ram 3500 6.7l L6 2011-2013--ram 3500 5.7l V8 2011-2012
- TechSpec Includes: (1) Mishimoto Transmission Cooler--(1) Mounting Bracket & Hardware Kit--(1) Line Kit--mishimoto Lifetime Warranty
- TechSpec Rows: 15
- TechSpec Inlet: 1/2"
- TechSpec Core Construction: Tube-and-fin
- TechSpec Overall Width (in): 1.54
- Mishimoto’s transmission cooler is designed to be a direct fit for the 2010-2012 Dodge 2500/3500 6.7L Cummins and features a tube and fin design optimal for heavy load towing and rapid load changes. This transmission cooler boasts a 60% increase in core volume and an 86% increase in external fin area for superior cooling and heat dissipation. It also pairs with an optional line kit that helps bypass the factory transmission cooler, as a transmission failure can contaminate that.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- Dodge Ram 2500/3500 6.7L Cummins Transmission Cooler, Bypass, Fits 2010-2012
- Dodge Ram 2500/3500 6.7L Cummins Transmission Cooler, Bypass, Fits 2010-2012
- Product Attributes:
- SellingPoint04: Bypasses The Stock Transmission Cooler And A/c Condenser
- SellingPoint05: No Dealing With Freon Or Vacuum Lines
- SellingPoint06: Mishimoto Lifetime Warranty
- TechSpec Overall Length (in): N/a
- SellingPoint07: N/a
- SellingPoint01: Direct Fit For The 2010-2012 Dodge 2500/3500 6.7l Cummins
- SellingPoint02: This Kit Is Meant To Be Used With Our Mmtc-ram-10 Transmission Cooler
- SellingPoint03: Hassle-free Installation
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Outlet: N/a
- TechSpec Core Height (in): N/a
- TechSpec Core Thickness (in): N/a
- SellingPoint10: N/a
- TechSpec Note: N/a
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): N/a
- TechSpec Overall Height (in): N/a
- TechSpec Fluid Capacity (qts): N/a
- TechSpec Caution: N/a
- TechSpec Applications: Dodge Ram 2500 5.7l V8 2010--dodge Ram 2500 6.7l L6 2010--dodge Ram 3500 6.7l L6 2010--ram 2500 6.7l L6 2011-2013--ram 2500 5.7l V8 2011-2012--ram 3500 6.7l L6 2011-2013--ram 3500 5.7l V8 2011-2012
- TechSpec Includes: (1) Line Kit--mishimoto Lifetime Warranty
- TechSpec Rows: N/a
- TechSpec Inlet: N/a
- TechSpec Core Construction: N/a
- TechSpec Overall Width (in): N/a
- Upgrade your 2010-2012 Dodge Ram 2500/3500 6.7L Cummins with the Mishimoto Transmission Cooler Bypass Kit. Designed for a direct fit, this line kit allows a customer to leave their factory transmission cooler in place, negating the need to discharge the refrigerant in the A/C system, but bypasses the factory transmission cooler in the event it is contaminated from a transmission failure. You don't need to worry about dealing with freon or vacuum lines, so you can get back on the road quickly. This kit is made to be used with the MMTC-RAM-10 Transmission Cooler, ensuring compatibility and ease of use. Plus, it comes with the Mishimoto lifetime warranty, giving you peace of mind and reliable performance.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- Dodge 6.7L Cummins Intercooler Kit
- Intercooler Kit, fits Dodge 6.7L Cummins 2010-2012
- Product Attributes:
- SellingPoint04: 3-in Core Is 100-percent Thicker Than Stock
- TechSpec Pipe Shape: N/a
- SellingPoint05: End Tanks Strategically Designed For Optimal Airflow
- SellingPoint06: Internal Fins Designed For Maximum Heat Transfer With Minimal Pressure Drop
- SellingPoint07: Aluminum Intercooler Pipes Replace Weak Factory Plastic Cold-side Pipe And Small Diameter Hot-side Pipe
- SellingPoint01: Direct Fit, Mounts In The Stock Location
- SellingPoint02: Bar-and-plate Construction With Cast Aluminum End Tanks
- TechSpec Maximum Recommended Horsepower: N/a
- TechSpec Overall Length (in): 38.75
- SellingPoint03: 52-percent Greater Internal Volume Than Stock
- TechSpec Centerline Radius: N/a
- TechSpec Chassis Codes: N/a
- TechSpec Pipe Length: N/a
- SellingPoint08: Provides Improved Airflow And Lowers Intake Air Temperatures
- SellingPoint09: Mandrel-bent Polished Aluminum Pipe Eliminates Restrictive Bends
- TechSpec Core Type: Bar-and-plate
- TechSpec Core Height (in): 26.7
- TechSpec Maximum Recommended Boost Pressure (PSI): N/a
- TechSpec Core Thickness (in): 3.15
- TechSpec Pipe Diameter: N/a
- Installation Difficulty: 4
- SellingPoint10: Includes Mishimoto Silicone Boots With Duracore Technology And Mishimoto Constant Tension T-bolt Clamps
- TechSpec Note: Disconnecting The Ac Lines Is Necessary To Remove The Stock Intercooler. It Is Recommended That The Vehicle Is Taken To A Certified Ac Repair Shop To Have The Ac Refrigerant Properly Evacuated Before Removing Any Stock Intercooler Components.----relocatio
- TechSpec Installation Notes: N/a
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- Install Difficulty: 4
- SellingPoint11: Sleek Silver Or Stealth Black Intercooler Options Available
- SellingPoint12: Mishimoto Lifetime Warranty
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 26.3
- TechSpec Overall Height (in): 28.75
- TechSpec Applications: 2010-2012 Dodge Ram 2500 W/ 6.7l Cummins Engine--2010-2012 Dodge Ram 3500 W/ 6.7l Cummins Engine--2010-2012 Dodge Chassis Cab W/ 6.7l Cummins Engine
- TechSpec Includes: (1) Mishimoto Intercooler--(1) Air Diversion Panel--(4) Silicone Boots With Duracore Technology--(8) Constant-tension T-bolt Clamps--(2) Aluminum Pipes--(2) Aluminum Mishimoto M Logo Badges--mishimoto Lifetime Warranty
- TechSpec Weight (lbs): N/a
- TechSpec Inlet (in): 3.5
- TechSpec Overall Width (in): 11
- TechSpec Outlet (in): 3.5
-
Features:
- Direct fit, mounts in the stock location
- Bar-and-plate construction with cast aluminum end tanks
- 52% greater internal volume than stock
- 3" core is 100% thicker than stock
- End tanks strategically designed for optimal airflow
- Internal fins designed for maximum heat transfer with minimal pressure drop
- Aluminum intercooler pipes replace weak factory plastic cold-side pipe and small diameter hot-side pipe
- Provides improved airflow and lowers intake air temperatures
- Mandrel-bent polished aluminum pipe eliminates restrictive bends
- Includes Mishimoto Silicone Boots with DuraCore™ technology and Mishimoto Constant Tension T-bolt Clamps
- Sleek Silver or Stealth Black intercooler options available
- Mishimoto Lifetime Warranty
- our engineers have maximized airflow by eliminating restrictive bends, allowing for a smooth and unimpeded airflow. The piping is constructed of mandrel bent 3.5in aluminum polished to a mirror finish. This kit includes Mishimoto silicone boots with DuraCore technology and constant-tension T-bolt clamps for accurate and consistent holding force. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. This package is rounded out with the Mishimoto intercooler featuring extremely durable cast aluminum end tanks and a bar-and-plate core, all designed to provide cool, dense air to your engine. Our intercooler features an increase in core volume and reduces pressure drop, which results in an overall increase in engine efficiency. All the components in this kit are engineered to last, just like your truck. Offered with either a black or silver core, the Mishimoto 6.7L Cummins intercooler kit is protected by our signature lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Region | Fuel Type | Engine | Aspiration | Engine Version | Engine Designation | Valves | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2012 - Ram 2500 | L | - | OHV | Canada | DIESEL | 6 Cyl 6.7L | Turbocharged | N/R | ETJ | 24 | ST | L | 408 |
- Dodge 6.7L Cummins Intercooler
- Intercooler, fits Dodge 6.7L Cummins 2010-2012
- Product Attributes:
- SellingPoint04: 3-in Core Is 100-percent Thicker Than Stock
- TechSpec Pipe Shape: N/a
- SellingPoint05: End Tanks Strategically Designed For Optimal Airflow
- SellingPoint06: Internal Fins Designed For Maximum Heat Transfer With Minimal Pressure Drop
- SellingPoint07: Includes Transition Couplers For Use With Mishimoto 6.7l Cummins Intercooler Pipe And Boot Kit Or Factory Intercooler Pipes
- SellingPoint01: Direct Fit, Mounts In The Stock Location
- SellingPoint02: Bar-and-plate Construction With Cast Aluminum End Tanks
- TechSpec Maximum Recommended Horsepower: N/a
- TechSpec Overall Length (in): 38.75
- SellingPoint03: 52-percent Greater Internal Volume Than Stock
- TechSpec Centerline Radius: N/a
- TechSpec Chassis Codes: N/a
- TechSpec Pipe Length: N/a
- SellingPoint08: Sleek Silver Or Stealth Black Intercooler Options Available
- SellingPoint09: Provides Improved Airflow And Lowers Intake Air Temperatures
- TechSpec Core Type: Bar-and-plate
- TechSpec Core Height (in): 26.7
- TechSpec Maximum Recommended Boost Pressure (PSI): N/a
- TechSpec Core Thickness (in): N/a
- TechSpec Pipe Diameter: N/a
- SellingPoint10: Mishimoto Lifetime Warranty
- TechSpec Note: Disconnecting The Ac Lines Is Necessary To Remove The Stock Intercooler. It Is Recommended That The Vehicle Is Taken To A Certified Ac Repair Shop To Have The Ac Refrigerant Properly Evacuated Before Removing Any Stock Intercooler Components.----relocatio
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- Install Difficulty: 4
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 26.3
- TechSpec Overall Height (in): 28.75
- TechSpec Applications: 2010-2012 Dodge Ram 2500 W/ 6.7l Cummins Engine--2010-2012 Dodge Ram 3500 W/ 6.7l Cummins Engine--2010-2012 Dodge Chassis Cab W/ 6.7l Cummins Engine
- TechSpec Includes: (1) Mishimoto Intercooler--air Diversion Panel--(2) Silicone Boots With Duracore Technology--(4) Constant-tension T-bolt Clamps--mishimoto Lifetime Warranty
- TechSpec Weight (lbs): N/a
- TechSpec Inlet (in): 3.5
- TechSpec Overall Width (in): 11
- TechSpec Outlet (in): 3.5
-
Features:
- Direct fit, mounts in the stock location
- Bar-and-plate construction with cast aluminum end tanks
- 52% greater internal volume than stock
- 3” core is 100% thicker than stock
- Mishimoto Lifetime Warranty
- Provides improved airflow and lowers intake air temperatures
- Sleek Silver or Stealth Black intercooler options available
- Includes transition couplers for use with Mishimoto 6.7L Cummins intercooler pipe and boot kit or factory intercooler pipes
- Internal fins designed for maximum heat transfer with minimal pressure drop
- End tanks strategically designed for optimal airflow
- The Dodge Cummins inline-6 is well known for its smooth power delivery and engine longevity. Mishimoto has released an intercooler for the 2010-2012 6.7L Cummins that is built to last, just like your truck. The Mishimoto intercooler is manufactured with robust cast aluminum end tanks and a dense bar-and-plate core. This intercooler provides decreased intake temperatures, improved airflow, and reduced pressure loss. Our engineers developed an intercooler with increased core volume that can support substantial boost pressures and lower EGTs in your stock or modified truck. The Mishimoto intercooler features larger than factory intercooler outlets for increased flow. Included with this intercooler are two silicone boots with DuraCore technology and our signature constant tension T-bolt clamps for consistent and reliable holding power. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel and oil. This effectively increases the life of our boots by preventing leaks and blow-outs. Offered in black or silver, the Mishimoto 6.7L Cummins intercooler is protected by our signature lifetime warranty
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2012 - Ram 3500 | SLT |
Showing 1 - 10 of 9454 products
Loading...