Image
Product
Price
- Right; Black
- Windshield Reinforcement; Right; Black;
- Windshield Reinforcement
- Product Attributes:
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
-
Features:
- Windshield Reinforcement
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Jeep Wrangler |
- Dual step, reinforced aluminum, black, rust free, bolt on
- Without lower cladding/lower rocker panel extensions
- Bolt on, direct fit, Rocker mounted, bolt on drop steps, all hardware and brackets included, body modification not required, eco dipped and powdercoated black
- ICI Alumilite Steps
- Product Attributes:
- Prop 65 (C, R, or CR): Cr
- Mounting Hardware Included: Yes
- Bar Color: Black
- Prop 65 Warning Label: Warning - Both Cancer And Reproduction.jpg
- Drilling Required: No
- Illuminated: No
- Sheen Level: Flat
- Bar Surface Type: Textured
- Bar Material: Aluminum
-
Features:
- ALUMILITE STEPS (aluminum 5052 in H32 temper)
- WILL NOT RUST
- BOLT-ON HOOP STEPS
- LIMITED LIFETIME STRUCTURAL WARRANTY
- BRACKETS AND HARDWARE INCLUDED
- EXCLUDES ALL models with lower cladding/lower rocker panel extensions
- ICI's Alumilite Series offers the Next Generation of Truck Side Steps that last longer, plays harder, performs better for your truck. Built with reinforced Aluminum, comparable in strength to steel and will not rust. Accommodates all trim and package options out of the box, direct fit. Primed, eco-dipped, and powder coated black. Comes with specialized, bolt on hoop steps, easy to replace. Limited Life Time structural warranty. Steel brackets and all hardware included.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2016 - Toyota 4Runner | Left and Right | Trail |
- 45lb shell, reinforced 3/16 inch 5052 Aluminum plating, steel winch plate
- Direct fit, removable external light bar bracket, winch ready 12.5K, two 3" LED cube light brackets, all hardware and brackets included
- Product Attributes:
- Retains Camera: Yes
- Prop 65 (C, R, or CR): Cr
- Grade Type:
- Heavy Duty
- Premium
- Mounting Hardware Included: Yes
- Retains Factory Tow Hooks: No
- Retains Adaptive Cruise Control: Yes
- Retains Factory Fog Lights: No
- Bar Finish: Powdercoat Matte Black
- Prop 65 Warning Label: Warning - Both Cancer And Reproduction.jpg
- Lighting Ports: Yes
- Material Thickness: 3/16
- Government Safety Standards Approved: No
-
Features:
- ALUMINUM FRONT WINCH-READY BUMPER BUILT WITH REINFORCED 3/16 INCH 5052 ALUMINUM PLATING
- WILL NOT RUST
- BUMPER SHELL WEIGHS LESS THAN 50LBS
- WITH OPTIONAL BOLT-ON RT-SERIES LIGHT BRACKET
- FITS W/ OR W/O TSS Sensor
- CAN HOLD UP TO A 30" LED LIGHT BAR OR MULTIPLE 3" CUBE LIGHTS
- WINCH READY
- ICI's Alumilite Series offers the Next generation of Aftermarket Truck Bumpers that last longer, plays harder, performs better for your truck. Built with reinforced 5052 3/16" Aluminum, comparable in strength to steel but weighs less than 50 lbs. and will not rust. Accommodates all OE factory parking sensors out of the box, direct fit. Accepts up to a 12.5K winch, steel winch carrier included. Primed, eco-dipped, and powder coated black. Internal and external LED lightbar options with removable RT light mount plus multiple LED cube bracket locations. Limited Life Time structural warranty. Steel brackets and all hardware included.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2016 - Toyota 4Runner | Front | TRD Pro |
- 35lb shell, reinforced 3/16 inch 5052 Aluminum plating, steel brackets
- W/WO Sensors
- Works with or without factory parking sensors as direct fit, two flush mount LED light locations, License plate bracket and LED included, all hardware and brackets included, body modification not required
- ICI Alumilite Rear Bumper
- Product Attributes:
- Retains Camera: Yes
- Prop 65 (C, R, or CR): Cr
- Grade Type:
- Heavy Duty
- Premium
- Mounting Hardware Included: Yes
- Retains Factory Tow Hooks: Yes
- Retains Rear Parking Sensors: Yes
- Bar Finish: Powdercoat Matte Black
- Prop 65 Warning Label: Warning - Both Cancer And Reproduction.jpg
- Lighting Ports: Yes
- Material Thickness: 3/16
- Retains Factory Receiver: Yes
- Government Safety Standards Approved: No
-
Features:
- REAR BUMPER BUILT WITH REINFORCED 3/16 INCH 5052 ALUMINUM PLATING
- WILL NOT RUST
- BUMPER SHELL WEIGHS LESS THAN 50LBS
- WITH LICENSE PLATE LIGHT AND BRACKET
- WITH OR WITHOUT PARKING SENSORS
- SINGLE FLUSH MOUNT LED HOLES
- WORKS WITH FACTORY HITCH
- ICI's Alumilite Series offers the Next generation of Aftermarket Truck Bumpers that last longer, plays harder, performs better for your truck. Built with reinforced 5052 3/16" Aluminum, comparable in strength to steel but weighs less than 40 lbs. and will not rust. Accommodates all OE factory parking sensors out of the box, direct fit. Primed, eco-dipped, and powder coated black. Accepts two flush mount LED lights. License plate bracket and LED included. Pre-cut trailer plug hole and spare tire access. Works with factory hitch receiver. Limited Life Time structural warranty. Steel brackets and all hardware included.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Chevrolet Silverado 3500 HD | Rear |
- 35lb shell, reinforced 3/16 inch 5052 Aluminum plating, steel brackets
- W/WO Sensors With single exhaust
- Works with or without factory parking sensors as direct fit, two flush mount LED light locations, License plate bracket and LED included, all hardware and brackets included, body modification not required
- ICI Alumilite Rear Bumper
- Product Attributes:
- Retains Camera: Yes
- Prop 65 (C, R, or CR): Cr
- Grade Type:
- Heavy Duty
- Premium
- Mounting Hardware Included: Yes
- Retains Factory Tow Hooks: Yes
- Retains Rear Parking Sensors: Yes
- Bar Finish: Powdercoat Matte Black
- Prop 65 Warning Label: Warning - Both Cancer And Reproduction.jpg
- Lighting Ports: Yes
- Material Thickness: 3/16
- Retains Factory Receiver: Yes
- Government Safety Standards Approved: No
-
Features:
- REAR BUMPER BUILT WITH REINFORCED 3/16 INCH 5052 ALUMINUM PLATING
- WILL NOT RUST
- BUMPER SHELL WEIGHS LESS THAN 50LBS
- WITH LICENSE PLATE LIGHT AND BRACKET
- WITH OR WITHOUT PARKING SENSORS
- SINGLE FLUSH MOUNT LED HOLES
- WORKS WITH FACTORY HITCH
- ICI's Alumilite Series offers the Next generation of Aftermarket Truck Bumpers that last longer, plays harder, performs better for your truck. Built with reinforced 5052 3/16" Aluminum, comparable in strength to steel but weighs less than 40 lbs. and will not rust. Accommodates all OE factory parking sensors out of the box, direct fit. Primed, eco-dipped, and powder coated black. Accepts two flush mount LED lights. License plate bracket and LED included. Pre-cut trailer plug hole and spare tire access. Works with factory hitch receiver. Limited Life Time structural warranty. Steel brackets and all hardware included.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Ford F-150 | Rear |
- Dual step, reinforced aluminum, black, rust free, bolt on
- Bolt on, direct fit, Rocker mounted, bolt on drop steps, all hardware and brackets included, body modification not required, eco dipped and powdercoated black
- ICI Alumilite Steps
- Product Attributes:
- Prop 65 (C, R, or CR): Cr
- Mounting Hardware Included: Yes
- Bar Color: Black
- Prop 65 Warning Label: Warning - Both Cancer And Reproduction.jpg
- Drilling Required: No
- Illuminated: No
- Sheen Level: Flat
- Bar Surface Type: Textured
- Bar Material: Aluminum
-
Features:
- ALUMILITE STEPS (aluminum 5052 in H32 temper)
- WILL NOT RUST
- BOLT-ON HOOP STEPS
- LIMITED LIFETIME STRUCTURAL WARRANTY
- BRACKETS AND HARDWARE INCLUDED
- CREW CAB (FULL 4-DOOR)
- ICI's Alumilite Series offers the Next Generation of Truck Side Steps that last longer, plays harder, performs better for your truck. Built with reinforced Aluminum, comparable in strength to steel and will not rust. Accommodates all trim and package options out of the box, direct fit. Primed, eco-dipped, and powder coated black. Comes with specialized, bolt on hoop steps, easy to replace. Limited Life Time structural warranty. Steel brackets and all hardware included.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Doors |
|---|---|---|
| 2016 - Ford F-150 | Left and Right | 4 |
- Dual step, reinforced aluminum, black, rust free, bolt on
- Bolt on, direct fit, Rocker mounted, bolt on drop steps, all hardware and brackets included, body modification not required, eco dipped and powdercoated black
- ICI Alumilite Steps
- Product Attributes:
- Prop 65 (C, R, or CR): Cr
- Mounting Hardware Included: Yes
- Bar Color: Black
- Prop 65 Warning Label: Warning - Both Cancer And Reproduction.jpg
- Drilling Required: No
- Illuminated: No
- Sheen Level: Flat
- Bar Surface Type: Textured
- Bar Material: Aluminum
-
Features:
- ALUMILITE STEPS (aluminum 5052 in H32 temper)
- WILL NOT RUST
- BOLT-ON HOOP STEPS
- LIMITED LIFETIME STRUCTURAL WARRANTY
- BRACKETS AND HARDWARE INCLUDED
- CREW MAX (FULL 4-DOOR)
- ICI's Alumilite Series offers the Next Generation of Truck Side Steps that last longer, plays harder, performs better for your truck. Built with reinforced Aluminum, comparable in strength to steel and will not rust. Accommodates all trim and package options out of the box, direct fit. Primed, eco-dipped, and powder-coated black. Comes with specialized, bolt-on hoop steps, easy to replace. Limited Life Time structural warranty. Steel brackets and all hardware included.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Doors |
|---|---|---|
| 2016 - Toyota Tundra | Left and Right | 4 |
- Flexy Flare Rubber Fender Exten. Heavy Duty Reinforced, 2-1/2" x 58" 4 Piece Kit
- Flexy Flare Rubber Fender Exten. Heavy Duty Reinforced, 2-1/2" x 58" 4 Piece Kit
- Product Attributes:
- Width EA: 3.5
- Length EA: 58
- Height EA: 1 3/8
- Mounting: Screws
- Material: Rubber
-
Features:
- Flexable UV Resistant PVC Rubber
- each piece measures 58" in length. Includes mounting hardware and instructions.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2016 - Ford Transit-250 | United States |
- Flexy Flare Rubber Fender Exten. Heavy Duty Reinforced, 2-1/2" x 58" 4 Piece Kit
- Flexy Flare Rubber Fender Exten. Heavy Duty Reinforced, 2-1/2" x 58" 4 Piece Kit
- 2 1/2" Heavy Duty Steel Reinforced 4 Piece Kit
- Product Attributes:
- Width EA: 3.5
- Length EA: 58
- Height EA: 1 3/8
- Mounting: Screws
- Material: Rubber
-
Features:
- Flexable UV Resistant PVC Rubber
- each piece measures 58" in length. Includes mounting hardware and instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Ford E-350 Super Duty |
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Mini Cooper |
Showing 1 - 10 of 1029 products
Loading...