Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Mazda 626 |
- Champion Copper Plus- Boxed - RN12YC
- Gap 0.032in OE Type ; Plug Type RN12YC
- Champion Copper Plus 404 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.813
- 20.650
- Reach: 0.75
- Center Electrode Tip Material: Nickel
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Pre-Gap Size:
- 0.035
- 0.89
- Classification: Champion Copper Plus
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.12
- Plug Type: Rn12yc
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
14GR42, 4091713, 4218, 4219, 4220, 5213693, 7507837, 7905, 7922, 8008, 9007, 93206675, 93230927, AGR32C, AGR42, AGR42C, AGR52, AGS32C...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1985 - Mazda 626 | L | 1998 | GAS | 4 Cyl 2.0L | 122 |
- NGK Standard Spark Plug
- Gap 0.032" Actual OE Manufacturer 30,000 mi OE Mfr Recommended Service Interval
- Standard Spark Plug
- Product Attributes:
- Center Electrode Design: Standard
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: Yes
- Electrical Terminal Type: Removable Nut
- Grade Type: Standard Replacement
- Service Number: Bpr5es
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Bpr5es
- Resistor Type: Yes
- Stock Number: 7734
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .036
- 0.9
- Ground Electrode Core Material: Nickel
- Material Grade: Nickel/copper
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 13/16"
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Nickel
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.13
- 54.0
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
- NGK's OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- NGK Standard spark plugs (in the iconic NGK 'yellow box' packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK's legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
0000-18-8914, 065-01402-30, 065-01402-80, 065-01404-80, 065-01405-60, 0660-18-110, 08981-999-010, 09482-00131, 09482-00155, 116, 12392-6771-1, 12863-6771-1, 12866-6771-1, 12866-6771-6, 12992-6771-1, 12992-6771-6, 150261430, 160690-78020...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1985 - Mazda 626 | L | 1998 | GAS | 4 Cyl 2.0L | 122 |
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Mazda 626 |
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Mazda GLC |
- Oil Drain Plug Pilot Point M14-1.50, Head Size 16Mm
- 16 mm Head M14 x 1.50 Thread Package Quantity: 5 Dorman - AutoGrade - Boxed Packaging Type: Box Thread Pitch: 1.5 mm
- Product Attributes:
- Método de drenaje: Tradicional
- Threads Per Inch: 0
- SAE or Metric:
- Metric
- Métrico
- Magnetic:
- No
- Non
- Thread Pitch: 1.5
- Thread Type:
- Fine
- Fino
- Oversized Thread:
- No
- Non
- Bolt Grade: 5.8
- Describir el tipo: Punta Piloto
- Special Tool Required:
- No
- Non
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Gasket Type:
- Gasket
- Junta
- Color:
- Plateado
- Silver
- Socket Points: M6 -1.0
- Head Tool Size: 16 Mm
- Thread Diameter: 14
- Contenidos del paquete: 5 Tapones De Drenaje De Aceite
- Describe Type: Pilot Point
- Head Drive Type:
- Hex
- Hexagonal
- Material:
- Acero
- Steel
- Drain Method: Conventional
-
Features:
- Direct replacement - this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution - engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction - designed and manufactured to strict specifications for reliable performance
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
This Part Fits the Following OEM/Substitute Numbers:
0924714027, 0B6S710404A, 1013938, 1027, 113115193, 1151785Z00, 1151786Z00, 1151786Z02, 11569943, 12582347, 17613pk, 2151221000, 2151221010, 2151223000, 2151223001, 215122X000, 263-917, 323276...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Mazda 626 |
- Thermoplastic Bushings
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2108032, 45G0113, 4881910010, 5461802E0A, 606.91001, GK90130, JTS710, K700525, K90130, MK90130, SK90130, SL254
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1985 - Mazda GLC | Front |
- 192 Degrees F OE Specified Temperature
- Standard
This Part Fits the Following OEM/Substitute Numbers:
12T25E, 13859, 15859, 1601-290210, 204, 21200AA100, 21200AA120, 21200P7906, 21200V0105, 21200V0205, 21200V0206, 241-192, 24192, 317534302, 33479, 34020, 35859, 3859...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1985 - Mazda 626 | L | 1998 | DIESEL | 4 Cyl 2.0L | 122 |
- Product Attributes:
- : .63
- End 1 Inside Diameter: .63
- Type: Single
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1985 - Mazda RX-7 | R | 1146 | Pipe To Radiator | 2 Cyl 1.1L | - |
- Product Attributes:
- : .63
- End 1 Inside Diameter: .63
- Type: Single
This Part Fits the Following OEM/Substitute Numbers:
0K30E-61-212A, 10007473, 10145102, 10284268, 10284269, 10888, 11290, 11377, 11498, 14100798, 14494S, 16198M, 16328M, 16382M, 1641237, 17856-86Z00, 18060L, 18888...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Fuel Type |
|---|---|---|
| 1985 - Mazda 626 | Heater Hose | GAS |
Showing 1 - 10 of 29 products
Loading...