Image
Product
Price
- Champion Platinum Power - Boxed - RE10PMC5
- Gap 0.044in; Plug Type RE10PMC5
- Champion Platinum Power 3032 Spark Plug (Carton of 6)
- Platinum Power
- Product Attributes:
- Hex Size:
- 0.625
- 15.880
- Reach: 0.984
- Center Electrode Tip Material: Platinum
- Seat Type: Tapered
- Electrical Terminal Type: Non-removable Nut
- Pre-Gap Size:
- 0.050
- 1.27
- Classification: Champion Platinum Power
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.12
- Plug Type: Re10pmc5
- Hex Size:
- Champion® Platinum Power™ spark plugs deliver powerful performance. Made from exclusive Heat-Active™ alloy, a fine-wire center electrode and V-trimmed ground electrode provides sharp spark focus.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
LZTR5A-13, LZTR5AGP, LZTR5AIX13, RE10PMC5
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Isuzu Ascender | L | - | 6 Cyl 4.2L | 256 |
- Fuel Pump Module Assembly
- Product Attributes:
- Fuel Filter Included: Yes
- Connector Gender: Female
- Negative Ground: No
- Grade Type: Premium
- Mounting Hardware Included: No
- Fuel Type: Gas
- Gasket Or Seal Material: Nitrile Rubber
- Fuel Tank Pressure Sensor Included: Yes
- Minimum Pressure: 58
- Outlet Quantity: 2
- Installation Warnings: No
- Resistance Ohms Empty: 250
- Lock Ring Included: No
- Average Flow Rating: 26
- Maximum Pressure: 80
- Pump Type: Electric
- Resistance Ohms Full: 40
- Wire Harness Included: No
- Fuel Sending Unit Included: Yes
- Pump Design: Turbine
- Connector Quantity: 1
- Outlet Outside Diameter: 0.375
- Terminal Quantity: 4
- Gasket Or Seal Included: Yes
- Internal Or External Strainer: Internal
- Terminal Type: Pin
- Terminal Gender: Male
- Regulator Included: Yes
- Strainer Included: Yes
- Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
This Part Fits the Following OEM/Substitute Numbers:
19153374, 19153629, 19256264, 19418261, 1AMFP00037, 402-P3707M, 67508, 8-19153-374-0, 8191533740, 88 96 7148, 88966954, 88967148, 953-3052, 9533052, A30120, AFS0910S, C0260M, DFG0515...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Wheel FeedBase | CID |
|---|---|---|---|---|---|
| 2006 - Isuzu Ascender | L | - | 6 Cyl 4.2L | 113.0 | 256 |
- Autolite AP5263 Platinum Spark Plug
- Gap .043 (in)
- Platinum Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Tapered
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.571
- 14.5
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.982
- 24.94
- Center Electrode Tip Material: Platinum
- Ground Electrode Tip Design: Standard
- Manufacturer Heat Range: 11
- Pre-Gap Size:
- 0.04
- 1.02
- Resistance: 4000
- Insulator Height:
- 2.192
- 55.68
-
Features:
- Engineered with a platinum firing tip that prevents gap erosion for longer service life.
- Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- The multi-rib insulator prevents flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
- Autolite® Platinum spark plugs are engineered with a platinum center electrode firing tip that provides improved performance and increased durability, making it a reliable choice for all older engine applications and designs. Its platinum design delivers quicker firing, smoother starts, for better acceleration, and improved fuel efficiency.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
19145286, 3032, 3570, 443, 4606402AD, 4997, 56028374AB, 570, FR8SPP30X, HGR7MDP0 , HGR7MQI0 , HGR7MQP0, HGR8MDP0 , HGR8MQI0 , HGR8MQP0, HR7MPP30X, HR8MPP30X, HR8SPP300V...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Isuzu Ascender | L | - | 6 Cyl 4.2L | 256 |
- Autolite 5245 Copper Spark Plug
- Gap .043 (in); Auto
- Copper Spark Plug
- Product Attributes:
- Center Electrode Projection: Long Projection
- Center Electrode Insulator Tip Projection:
- 0.19
- 4.83
- Seat Type: Tapered
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Regular
- Core Nose Length:
- 0.449
- 11.4
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.679
- 17.25
- Center Electrode Tip Material: Nickel
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.026
- 51.46
-
Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Autolite® Copper spark plugs are engineered to deliver quick starts and the power your vehicle or applications needs to meet performance expectations.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
15, 19157998, 21341, 213416, 25164644, 31241, 3754, 3851868, 41-908, 5614053, 5614155, 5614230, 5614279, AGSF33C, AGSF43C, C45LR, C46LR, CC524E...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Isuzu Ascender | V | 5328 | 8 Cyl 5.3L | 325 |
- Greaseable Super Strength Universal Joint
- Greasable Super Strength U-Joint
- MOOG 280 Greaseable Super Strength Universal Joint for Jeep Grand Cherokee
- Product Attributes:
- Bearing Cap Type: 4 Plain Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27
- Grade Type: Premium
- Length Axis 1:
- 3.22
- 81.7
- Length Axis 2:
- 3.22
- 81.7
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Plain Round Bearings
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Lube Fitting Location: Flush-type Lube Fitting In Bearing
- Part Description: Universal Joint
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
10153, 10153BF, 10153G, 1143HD, 1143HP, 114513, 114513R, 114513X, 114521HD, 153, 15617322, 20049, 20049P, 20208, 20335, 2100153, 2120153, 2150153...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2006 - Isuzu i-350 | Front Driveshaft at Front Axle | 4WD |
- with 7.25 (in) Ring Gear with AAM Differential Independent Front Suspension
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2006 - Isuzu Ascender | Front Inner | 4WD |
- with 8.625 (in) Ring Gear with AAM Differential
This Part Fits the Following OEM/Substitute Numbers:
0009800102, 0009800302, 0009801102, 0009810380, 00098113005, 0009812905, 0009813005, 004-311-211, 007 981 53 05, 0079814105, 01820551, 04626490, 04626726, 04626737, 04864210, 05072493AA, 05072498AA, 05134464AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Isuzu Ascender | Rear Outer |
- Standard Multi-Purpose Light Bulb Box of 10
- Boxed Product; Miniature Lamp
- Wagner Standard 168 Standard Multi-Purpose Light Bulb Box of 10
- Product Attributes:
- Bulb Color: Clear
- Filament Type: C-2f
- Average Rated Life: 1500
- Voltage: 14.000
- Wattage: 4.900
- Filament Quantity: 1
- Amperage Rating: 0.350
- Brightness: 3.000
- Bulb Base Type: Wedge
- Bulb Type: T-3 1/4 Bulb 13/32 (10mm) Dia
-
Features:
- MULTIPURPOSE LIGHTING -- Designed for wide range of interior and exterior automotive lighting applications like turn signals, taillights, brake lights and cargo lights
- BUILT TO LAST -- Continuous coil filament resists shock and vibration and improves the life of the bulb
- HIGH QUALITY -- High-grade filament and natural amber glass (application-specific) for dependable long-lasting performance
- DOT/SAE COMPLIANT -- Wagner lighting products are Department of Transportation (DOT) compliant and meet or exceed Society of Automotive Engineers (SAE) standards
- COMPREHENSIVE COVERAGE -- Available for passenger car and light truck, commercial and off-highway, agriculture and industrial, marine and powersport applications
- Delivering long-lasting dependability, count on Wagner® miniature bulbs for all your interior and exterior automotive lighting needs. Manufactured with a continuous coil that resists shock and vibration, you’ll appreciate the long life and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- This item must be purchased in quantities of 10
This Part Fits the Following OEM/Substitute Numbers:
0K2AA51B49, 0K2BA51B05, 0K53E5141A, 110168, 11016822, 11079451, 168, 168CP, 1821940530, 1821940540, 1864305009, 1864305009E, 1864305009L, 1864305009N, 1NL847440000, 1WDH43470000, 1WDH47440000, 2123313...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2006 - Isuzu Ascender |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 10.1
- 257
- End 1 Inside Diameter:
- 1.3
- 33
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.3
- 33
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
15160996, 20382S, 22652, 62422, 71078, 9285, F10103
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2006 - Isuzu Ascender | L | - | Upper | GAS | 6 Cyl 4.2L | 256 |
- Re-Use Exsisting OE Bolt and Washer
- Product Attributes:
- :
- 30
- 90
- Max Belt Width: 06 Rib
- Bearing Inner Diameter 1: 17
- Number of Bearings: 1
- Flat: Y
- Material: Steel
- Belt Type: Serpentine
- :
This Part Fits the Following OEM/Substitute Numbers:
06003045, 10129561, 10141997, 10179211, 10187650, 12552361, 12555244, 12555245, 12555609, 12557819, 12564505, 12564510, 12580771, 12580773, 15662645, 16603-0W030, 17540-77EA1, 1FP0-32-700...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Isuzu Ascender | V | 5328 | 8 Cyl 5.3L | 325 |
Showing 1 - 10 of 60 products
Loading...