Image
Product
Price
- Class 3 Hitch; 2in. Receiver; Select Ford Escape; Mazda Tribute; Mercury Mariner
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 5000lbs. Weight Distributing; 500lbs. Weight Distributing Tongue Weight Round Main Body~Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 13650 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Ford Escape; Mazda Tribute; Mercury Mariner
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- WD Tongue Weight: 500
- Install Time: 30 Minutes
- WC Tongue Weight: 350
- Weight Distribution: 5000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford Escape, Mazda Tribute and Mercury Mariner (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2011 - Mazda Tribute | V | 2968 | Rear | 6 Cyl 3.0L | S | 181 |
- Replacement Air Filter
- Panel; H-0.938 in.; L-12 in.; W-6.75 in.
- K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s No-Hassle Lifetime Limited Warranty.
- Air Filter
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- WARNING CA Proposition 65: Yes
- Item Weight: 1.400 Lbs. (0.6 Kg)
- Machine Washable: Yes
- Product Box Height: 13.560 In. (345mm)
- Filter Material: Cotton Gauze
- Inside Diameter: Oem
- Product Box Width: 1.750 In. (44 Mm)
- Product Box Length: 7.720 In. (196mm)
- Item Height: 0.938 In. (24mm)
- Prop 65 (C, R or CR): Cr
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Outside Width: 6.750 In. (171mm)
- Flange Angle: 0 Degree
- Shape: Panel
- Package Material: Paperboard
- Filter Re-Oiling Amount: 1.16 Oz (34 Ml)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Element Material: Cotton Gauze
- Cap Outside Diameter: N/a
- Filter Style: Dry
- Outside Length: 12.000 In. (305mm)
- Package Type: Box
-
Features:
- Designed To Boost Horsepower And Acceleration
- Washable And Reusable
- High Air Flow With Exceptional Filtration
- Lasts Up To 50000 Miles Before Cleaning
- Works With Original Equip. Mfg. Vehicle Electronics
- Will Not Void Vehicle Warranty
- Million Mile Limited Warranty
- K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
This Part Fits the Following OEM/Substitute Numbers:
2820395, 46935, 7T4U9601AA, 7T4Z9601A, 88935, A1623, A25699, A3155C, A3336C, A5699, AF2884, BT439601AA, CA10242, CY0113240A, CY0113Z40B, DW88935, FA1884, FB67020...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2011 - Mazda 6 | V | 3726 | 6 Cyl 3.7L | S | 227 |
- Replacement Air Filter
- Panel; H-0.938 in.; L-12 in.; W-6.75 in.
- K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s No-Hassle Lifetime Limited Warranty.
- Air Filter
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- WARNING CA Proposition 65: Yes
- Item Weight: 1.400 Lbs. (0.6 Kg)
- Machine Washable: Yes
- Product Box Height: 13.560 In. (345mm)
- Filter Material: Cotton Gauze
- Inside Diameter: Oem
- Product Box Width: 1.750 In. (44 Mm)
- Product Box Length: 7.720 In. (196mm)
- Item Height: 0.938 In. (24mm)
- Prop 65 (C, R or CR): Cr
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Outside Width: 6.750 In. (171mm)
- Flange Angle: 0 Degree
- Shape: Panel
- Package Material: Paperboard
- Filter Re-Oiling Amount: 1.16 Oz (34 Ml)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Element Material: Cotton Gauze
- Cap Outside Diameter: N/a
- Filter Style: Dry
- Outside Length: 12.000 In. (305mm)
- Package Type: Box
-
Features:
- Designed To Boost Horsepower And Acceleration
- Washable And Reusable
- High Air Flow With Exceptional Filtration
- Lasts Up To 50000 Miles Before Cleaning
- Works With Original Equip. Mfg. Vehicle Electronics
- Will Not Void Vehicle Warranty
- Million Mile Limited Warranty
- K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2011 - Mazda 6 | V | 3726 | 6 Cyl 3.7L | S | 227 |
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Mazda RX-8 |
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Mazda 2 | L | 1498 | 4 Cyl 1.5L | 91 |
- Spark Plug Platinum TT
- Gap 0.040 Platinum TT - Twin-Tip Technology Design with Platinum Center Electrode and Titanium Enhanced Ground Strap
- Spark Plug Platinum TT
- Spark Plug - Platinum TT
- Product Attributes:
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Center Electrode Core Material: Copper
- Hex Size: 16
- Reach: 19.0
- Center Electrode Tip Material: Platinum
- Ground Electrode Tip Design: Titanium Enhanced Twin-tip
- Manufacturer Heat Range: 16
- Ground Configuration: Twin-tip
- Pre-Gap Size: 1.0
- Resistance: 5000.0
- Ground Electrode Core Material: Nickel
- Thread Diameter: 14.0
- Twin-Tip design enables faster flame propagation for more complete combustion.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0000-18-BP01, 0000-18-F287, 0000-18-JE41, 0000-18-KJ13, 003 159 31 03, 003 159 54 03, 003 159 66 03, 003 159 67 03, 003 159 68 03, 003 159 71 03, 003 159 81 03, 003 159 94 03, 003 159 97 03, 004 159 07 03, 004 159 19 03, 09482-00549, 0K23A-18-110, 101 000 044 AA...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Mazda 2 |
- Champion Platinum Power - Boxed - RE10PMC5
- Gap 0.052in; Plug Type RE10PMC5
- Champion Platinum Power 3032 Spark Plug (Carton of 6)
- Platinum Power
- Product Attributes:
- Hex Size:
- 0.625
- 15.880
- Reach: 0.984
- Center Electrode Tip Material: Platinum
- Seat Type: Tapered
- Electrical Terminal Type: Non-removable Nut
- Pre-Gap Size:
- 0.050
- 1.27
- Classification: Champion Platinum Power
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.12
- Plug Type: Re10pmc5
- Hex Size:
- Champion® Platinum Power™ spark plugs deliver powerful performance. Made from exclusive Heat-Active™ alloy, a fine-wire center electrode and V-trimmed ground electrode provides sharp spark focus.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
LZTR5A-13, LZTR5AGP, LZTR5AIX13, RE10PMC5
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Mazda 6 | L | 2488 | 4 Cyl 2.5L | 152 |
- NGK Iridium IX Spark Plug
- Gap 0.048"
- Iridium IX Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.16
- 4.0
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Service Number: Tr5ix
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Tr5ix
- Resistor Type: Yes
- Stock Number: 7397
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- .040
- 1.0
- Ground Electrode Core Material: Nickel
- Material Grade: Iridium
- Center Electrode Projection: Mid Projection
- Seat Type: Tapered
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.689
- 17.5
- Center Electrode Tip Material: Iridium
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.07
- 52.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium's density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
- SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
- RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
- NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode's durability is six times harder than platinum. Iridium alloy's extremely high melting point is perfect for today's engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
12571533, 1765290, 1835350T, 1835384T, 1835422T, 241-904, 241-906, 241-910, 25164640, 3, 4011, 41-900, 41-904, 41-906, 41-907, 41-910, 41-986, 4205...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Mazda Tribute | V | 2968 | 6 Cyl 3.0L | 181 |
- Class 3 Hitch; 2in. Receiver; Select Ford Escape; Mazda Tribute; Mercury Mariner
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 5000lbs. Weight Distributing; 500lbs. Weight Distributing Tongue Weight Round Main Body~Drilling Required~Visibility: Exposed~For Models Equipped w/Factory 1.25 in. Reciever Hitch~Install Time 60 Minutes~Exhaust Modification Required
- CURT 13651 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Ford Escape; Mazda Tribute; Mercury Mariner
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- WD Tongue Weight: 500
- Install Time: 60 Minutes
- WC Tongue Weight: 350
- Weight Distribution: 5000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford Escape, Mazda Tribute and Mercury Mariner (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2011 - Mazda Tribute | V | 2968 | Rear | 6 Cyl 3.0L | S | 181 |
- Product Attributes:
- :
- 24.9
- 70
- Max Belt Width: 06 Rib
- Bearing Inner Diameter 1: 17
- Number of Bearings: 1
- Flat: Y
- Material: Polymer
- Belt Type: Serpentine
- :
This Part Fits the Following OEM/Substitute Numbers:
04593633AA, 04593805AB, 04861514AA, 11 28 0 946 004, 11 28 1 407 520, 11 28 1 439 062, 11 28 1 745 551, 11 28 7 515 867, 11.28.1.482.199-02, 16620-22010, 16620-22013, 16620-22030, 16620-22031, 16620-22033, 231144, 23770-AA059, 23770-AA05A, 36131...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Mazda 6 | V | 3726 | 6 Cyl 3.7L | 227 |
Showing 1 - 10 of 286 products
Loading...