Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Mazda 6 |
- Front Suspension Stabilizer Bar Link
- Includes A Full Ball Stud To Provide 360 Degrees Of Smooth Rotational Movement
- MOOG K80296 Front Suspension Stabilizer Bar Link for Mazda CX-5
- Product Attributes:
- Bolt Length:
- 11.220
- 285.0
- Part Description: Suspension Stabilizer Bar Link
- Bolt Length:
-
Features:
- EASY TO INSTALL -- Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE -- Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS -- Made from premium materials for long-lasting dependability
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
101-5090, 18750033, 1880296, 2651747, 45G20538, 46G20538A, 4882042020, 536-271, 545-1538B, 5451500, 5451538, 5L8Z5K483AA, 606.65057, 60646022, 60746022, 7L8Z5K483A, 7L8Z5K483B, DG5451538...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Mazda 6 | Front |
- Front Suspension Stabilizer Bar Link
- MOOG K80296 Front Suspension Stabilizer Bar Link for Mazda CX-5
- Product Attributes:
- Bolt Length:
- 11.220
- 285.0
- Part Description: Suspension Stabilizer Bar Link
- Bolt Length:
-
Features:
- EASY TO INSTALL -- Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE -- Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS -- Made from premium materials for long-lasting dependability
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Mazda 6 | Front |
- FRAM, TG6607, Oil Filter
- Spin-on Oil Filter
- Tough Guard
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.266
- Non Slip Grip: Yes
- Gasket Thickness: 0.203
- Torque Nut: No
- Attachment Type: Spin-on
- Gasket Type: Base
- Housing Color: Silver
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 13
- Grade: Premium
- Gasket Outside Diameter: 2.531
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 15,000 miles (24,000 kilometers)
- Engineered for tough driving conditions, stop and go traffic, and hot and cold temperatures
- SureGrip® technology for easy install and removal
- Synthetic blend media provides 99% dirt holding capacity
- Silicone anti-drain back valve helps ensure safe engine start up
- FRAM Tough Guard® oil filters are designed for tough driving conditions, stop and go traffic, and hot and cold temperatures. The synthetic blend media is engineered to perform with conventional and synthetic motor oil. Equipped with SureGrip® technology, FRAM Tough Guard oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 15,000 miles (24,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
041-8136, 0B631-14-302, 115010-6370, 119305-35150, 119305-35151, 1230A040, 124450-35100, 132 180 0010, 1365, 150-1008, 150-1011, 15208-31U0C, 15208-65F00, 15208-65F01, 15208-65F0A, 15208-65F0B, 15208-65F0C, 15208-65F0D...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Mazda 3 | L | 1998 | 4 Cyl 2.0L | 122 |
- FRAM, PH6607, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 13
- Gasket Inside Diameter: 2.266
- Gasket Outside Diameter: 2.531
- Gasket Thickness: 0.203
-
Features:
- SureGrip® technology for easy install and removal
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- Silicone anti-drain back valve helps ensure safe engine start up
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
041-8136, 0B631-14-302, 115010-6370, 119305-35150, 119305-35151, 1230A040, 124450-35100, 132 180 0010, 1365, 150-1008, 150-1011, 15208-31U0C, 15208-65F00, 15208-65F01, 15208-65F0A, 15208-65F0B, 15208-65F0C, 15208-65F0D...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2021 - Mazda 3 Sport | L | 1998 | Canada | 4 Cyl 2.0L | 122 |
- Sport Jr. Car Top Carrier (10 cu. ft.)
- 10 cu. ft.; Includes 4 Attachment Straps/4 Car Clips/Stuff Sack And Sewn-In Set Up Guide
- Sport Jr Car Top Carrier
- Sport Jr Car Top Carrier
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- 10 Cu Ft Capacity
- 36 in. L x 30 in. W x 16 in. H
- Designed For Compact Cars W/ Or W/o A Roof Rack
- Can Be Used On Larger Vehicles W/ Or W/o A Roof Rack
- 100% Waterproof With Welded Seams And Szip Waterproof Zipper
- No Zipper Flap Required
- Includes 4 Straps/4 Car Clips/Stuff Sack/Set Up Guide
- The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier's straps to a vehicle's roof rack or use the Car Clips to attach the straps to a vehicle's door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2021 - Mazda 6 | GT |
- Autolite AI5682 Iridium Ultra Spark Plug
- Gap .043 (in)
- Iridium Ultra Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.15
- 3.81
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Core Nose Length:
- 0.357
- 9.07
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Indexed: No
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 14
- Reach:
- 1.043
- 26.49
- Center Electrode Tip Material: Iridium
- Manufacturer Heat Range: 11
- Resistance: 4000
- Insulator Height:
- 2.012
- 51.1
-
Features:
- Engineered with an iridium-enhanced laser-welded fine-wire center electrode that provides focused ignition, optimal ignitability, and maximum performance.
- Its proprietary platinum ground electrode provides increased durability and resistance to wear, extending the life of the plug.
- The tapered ground wire enhances ignitability for improved combustion and performance.
- The high alumina ceramic multi-rib insulator insulator provides thermal conductivity and superior insulation for increased strength & prevents flash-over.
- The copper core within the plug provides reliable performance with higher thermal conductivity.
- Autolite® Iridium Ultra® is equipped with a laser welded iridium enhanced fine-wire center electrode that ensures your engine runs at maximum performance; while its double precious metal design provides increased durability, allowing your engine to maintain desired performance levels for longer. Iridium Ultra delivers optimal fuel efficiency, acceleration, and ignitability, making it the best OE replacement plug choice for modern engines.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
004 159 39 03, 12290-59B-003, 12290-5A2-A01, 12290-5K0-A01, 12290-5PA-A01, 12290-5R0-003, 12290-5R0-004, 12290-6A0-A01, 12290-RDF-A01, 22401 AA830, 22401-JF01D, 22401-JK01D, 3457, 6043, 6711, 96310, DILKAR7B8, DILKAR7C11S...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Fuel Type | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2021 - Mazda 6 | L | 2488 | - | GAS | 4 Cyl 2.5L | Turbocharged | 152 |
- Autolite AI5682 Iridium Ultra Spark Plug
- Iridium Ultra Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.15
- 3.81
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Core Nose Length:
- 0.357
- 9.07
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Indexed: No
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 14
- Reach:
- 1.043
- 26.49
- Center Electrode Tip Material: Iridium
- Manufacturer Heat Range: 11
- Resistance: 4000
- Insulator Height:
- 2.012
- 51.1
-
Features:
- Engineered with an iridium-enhanced laser-welded fine-wire center electrode that provides focused ignition, optimal ignitability, and maximum performance.
- Its proprietary platinum ground electrode provides increased durability and resistance to wear, extending the life of the plug.
- The tapered ground wire enhances ignitability for improved combustion and performance.
- The high alumina ceramic multi-rib insulator insulator provides thermal conductivity and superior insulation for increased strength & prevents flash-over.
- The copper core within the plug provides reliable performance with higher thermal conductivity.
- Autolite® Iridium Ultra® is equipped with a laser welded iridium enhanced fine-wire center electrode that ensures your engine runs at maximum performance; while its double precious metal design provides increased durability, allowing your engine to maintain desired performance levels for longer. Iridium Ultra delivers optimal fuel efficiency, acceleration, and ignitability, making it the best OE replacement plug choice for modern engines.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - Mazda 3 | L | 2488 | 4 Cyl 2.5L | 152 |
- Autolite XP5682 Iridium XP Spark Plug
- Gap .043 (in)
- Iridium XP Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.15
- 3.81
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Core Nose Length:
- 0.357
- 9.07
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Indexed: No
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 14
- Reach:
- 1.043
- 26.49
- Center Electrode Tip Material: Iridium
- Manufacturer Heat Range: 11
- Resistance: 4000
- Insulator Height:
- 2.012
- 51.1
-
Features:
- Engineered with an Iridium-enhanced center electrode and fine-wire design that increases ignitability and provides a more focused ignition for improved engine performance.
- Its proprietary platinum ground electrode provides increased durability* and resistance to wear, extending the life of the plug.
- The tapered ground wire improves engine ignitability.
- Its high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength while preventing flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Includes a lifetime limited warranty that guarantees optimum performance equal to OE designed plugs.
- Autolite® Iridium XP spark plugs are engineered with an iridium-enhanced fine-wire and a proprietary, platinum ground electrode, to increase durability*, while its tapered ground wire maximizes engine efficiency, delivering improved engine performance, fuel efficiency, acceleration, and ignitability.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
004 159 39 03, 12290-59B-003, 12290-5A2-A01, 12290-5A2-A02, 12290-5K0-A01, 12290-5PA-A01, 12290-5R0-003, 12290-5R0-004, 12290-RDF-A01, 22401 AA830, 22401-JF01D, 22401-JK01D, 3457, 6043, 6711, 6812 2874AA, 96310, 96318...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Fuel Type | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2021 - Mazda 6 | L | 2488 | - | GAS | 4 Cyl 2.5L | Turbocharged | 152 |
- 9005;100% Fitment;Compact and Powerful;Patented Thermal Management
- W/ HALOGEN CAPSULE HEADLAMPS
- COMPACT + POWERFUL: Introducing the revolutionary Tiny Monster Concept Series LED Performance Bulbs. You will be amazed by the power output of such a compact bulb. Conversion of headlights and fog lights to LED has never been easier.
- Product Attributes:
- Power Consumption: 18 Watt
- Light Output: 6,000 Lumen Per Kit
- IP Rating: Ip67
- Amp Draw per Bulb: 1.3 Amps @ 13v Dc
- Color Temperature: 6,500 Kelvin
- Operating Voltage: 7.5-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
-
Features:
- Each kit produces a powerful 6,000 lumen light output
- Precision optics designed for long range visibility and zero glare
- Patented INTGCool integrated heat sink allowing for plug & play installation as easy as replacing a stock bulb
- SmartDrive technology with built-in advance
- Temperature regulation provides dependable operation at full intensity
- TopAim bulb head 360degree rotates for optimal beam pattern
- Durable and shock resistant build for all weather driving
- Concept Series LED Performance Bulbs. Get both a sleek look and improved visibility for safer driving at night with these powerful LED bulbs. With a combined output of 6,000 lumens, these bulbs easily outperform halogen bulbs and even the average quality LED bulbs on the market. Our patented, integrated heat sink design is a breakthrough for headlight and fog light conversions which brings a real Plug & Play experience to users. Converting to LED is as easy as replacing a stock bulb.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - Mazda CX-3 | High Beam |
Showing 1 - 10 of 47 products
Loading...