Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - INFINITI Q50 |
- FRAM, PH6607, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 13
- Gasket Inside Diameter: 2.266
- Gasket Outside Diameter: 2.531
- Gasket Thickness: 0.203
-
Features:
- SureGrip® technology for easy install and removal
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- Silicone anti-drain back valve helps ensure safe engine start up
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
041-8136, 0B631-14-302, 115010-6370, 119305-35150, 119305-35151, 1230A040, 124450-35100, 132 180 0010, 1365, 150-1008, 150-1011, 15208-31U0C, 15208-65F00, 15208-65F01, 15208-65F0A, 15208-65F0B, 15208-65F0C, 15208-65F0D...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2022 - INFINITI Q60 | V | 2997 | 6 Cyl 3.0L | - |
- FRAM, TG6607, Oil Filter
- Spin-on Oil Filter
- Tough Guard
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.266
- Non Slip Grip: Yes
- Gasket Thickness: 0.203
- Torque Nut: No
- Attachment Type: Spin-on
- Gasket Type: Base
- Housing Color: Silver
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 13
- Grade: Premium
- Gasket Outside Diameter: 2.531
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 15,000 miles (24,000 kilometers)
- Engineered for tough driving conditions, stop and go traffic, and hot and cold temperatures
- SureGrip® technology for easy install and removal
- Synthetic blend media provides 99% dirt holding capacity
- Silicone anti-drain back valve helps ensure safe engine start up
- FRAM Tough Guard® oil filters are designed for tough driving conditions, stop and go traffic, and hot and cold temperatures. The synthetic blend media is engineered to perform with conventional and synthetic motor oil. Equipped with SureGrip® technology, FRAM Tough Guard oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 15,000 miles (24,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
041-8136, 0B631-14-302, 115010-6370, 119305-35150, 119305-35151, 1230A040, 124450-35100, 132 180 0010, 1365, 150-1008, 150-1011, 15208-31U0C, 15208-65F00, 15208-65F01, 15208-65F0A, 15208-65F0B, 15208-65F0C, 15208-65F0D...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - INFINITI Q50 |
- Relief pressure N/A
- Standard
This Part Fits the Following OEM/Substitute Numbers:
10264, 10264ST, 1678-325919, 17073, 214301P107, 214307S001, 21430C991A, 21430ZZ00A, 7503, 7503-RC, 9T3R, P7503, T3R
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2022 - INFINITI QX80 | V | 5552 | 8 Cyl 5.6L | - |
- Autolite AI5683 Iridium Ultra Spark Plug
- OE Style
- Iridium Ultra Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.15
- 3.81
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.514
- 13.06
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 14
- Reach:
- 1.043
- 26.49
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.012
- 51.1
-
Features:
- Engineered with an iridium-enhanced laser-welded fine-wire center electrode that provides focused ignition, optimal ignitability, and maximum performance.
- Its proprietary platinum ground electrode provides increased durability and resistance to wear, extending the life of the plug.
- The tapered ground wire enhances ignitability for improved combustion and performance.
- The high alumina ceramic multi-rib insulator insulator provides thermal conductivity and superior insulation for increased strength & prevents flash-over.
- The copper core within the plug provides reliable performance with higher thermal conductivity.
- Autolite® Iridium Ultra® is equipped with a laser welded iridium enhanced fine-wire center electrode that ensures your engine runs at maximum performance; while its double precious metal design provides increased durability, allowing your engine to maintain desired performance levels for longer. Iridium Ultra delivers optimal fuel efficiency, acceleration, and ignitability, making it the best OE replacement plug choice for modern engines.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1406, 19158043, 19316339, 22401-1KC1C, 22401-1LA1C, 22401-CK81B, 22401-EW61C, 22401-JA01B, 22401AA781, 3442, 41-112, 7420, 90919-01275, 9406, 9410, 96339, DILKAR6A11, DILKAR7B11...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2022 - INFINITI QX80 | V | 5552 | 8 Cyl 5.6L | - |
- Autolite AI5683 Iridium Ultra Spark Plug
- Gap .044 (in)
- Iridium Ultra Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.15
- 3.81
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.514
- 13.06
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 14
- Reach:
- 1.043
- 26.49
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.012
- 51.1
-
Features:
- Engineered with an iridium-enhanced laser-welded fine-wire center electrode that provides focused ignition, optimal ignitability, and maximum performance.
- Its proprietary platinum ground electrode provides increased durability and resistance to wear, extending the life of the plug.
- The tapered ground wire enhances ignitability for improved combustion and performance.
- The high alumina ceramic multi-rib insulator insulator provides thermal conductivity and superior insulation for increased strength & prevents flash-over.
- The copper core within the plug provides reliable performance with higher thermal conductivity.
- Autolite® Iridium Ultra® is equipped with a laser welded iridium enhanced fine-wire center electrode that ensures your engine runs at maximum performance; while its double precious metal design provides increased durability, allowing your engine to maintain desired performance levels for longer. Iridium Ultra delivers optimal fuel efficiency, acceleration, and ignitability, making it the best OE replacement plug choice for modern engines.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2022 - INFINITI QX60 | V | 3498 | 6 Cyl 3.5L | - |
- Autolite AI5683 Iridium Ultra Spark Plug
- Gap .044 (in)
- Iridium Ultra Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.15
- 3.81
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.514
- 13.06
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 14
- Reach:
- 1.043
- 26.49
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.012
- 51.1
-
Features:
- Engineered with an iridium-enhanced laser-welded fine-wire center electrode that provides focused ignition, optimal ignitability, and maximum performance.
- Its proprietary platinum ground electrode provides increased durability and resistance to wear, extending the life of the plug.
- The tapered ground wire enhances ignitability for improved combustion and performance.
- The high alumina ceramic multi-rib insulator insulator provides thermal conductivity and superior insulation for increased strength & prevents flash-over.
- The copper core within the plug provides reliable performance with higher thermal conductivity.
- Autolite® Iridium Ultra® is equipped with a laser welded iridium enhanced fine-wire center electrode that ensures your engine runs at maximum performance; while its double precious metal design provides increased durability, allowing your engine to maintain desired performance levels for longer. Iridium Ultra delivers optimal fuel efficiency, acceleration, and ignitability, making it the best OE replacement plug choice for modern engines.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2022 - INFINITI QX80 | V | 5552 | 8 Cyl 5.6L | - |
- Autolite AI5683 Iridium Ultra Spark Plug
- OE Style
- Iridium Ultra Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.15
- 3.81
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.514
- 13.06
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 14
- Reach:
- 1.043
- 26.49
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.012
- 51.1
-
Features:
- Engineered with an iridium-enhanced laser-welded fine-wire center electrode that provides focused ignition, optimal ignitability, and maximum performance.
- Its proprietary platinum ground electrode provides increased durability and resistance to wear, extending the life of the plug.
- The tapered ground wire enhances ignitability for improved combustion and performance.
- The high alumina ceramic multi-rib insulator insulator provides thermal conductivity and superior insulation for increased strength & prevents flash-over.
- The copper core within the plug provides reliable performance with higher thermal conductivity.
- Autolite® Iridium Ultra® is equipped with a laser welded iridium enhanced fine-wire center electrode that ensures your engine runs at maximum performance; while its double precious metal design provides increased durability, allowing your engine to maintain desired performance levels for longer. Iridium Ultra delivers optimal fuel efficiency, acceleration, and ignitability, making it the best OE replacement plug choice for modern engines.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2022 - INFINITI QX60 | V | 3498 | 6 Cyl 3.5L | - |
- Locking
This Part Fits the Following OEM/Substitute Numbers:
10501, 10501D, 10504, 10504Y, 10507, 10591, 10591D, 1078-290207, 11504, 11504Y, 11507, 11591, 12F20L, 1H0201553, 307201551, 31778, 31780, 31783...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2022 - INFINITI QX80 | V | 5552 | 8 Cyl 5.6L | - |
- PROTEC-NEW Spin-On Lube Filter
- Original Equipment Part Number 152089E01A Also Available In Master Pack Version Also Available In Master Pack Version
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.685
- Burst Pressure: 363
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 9-11 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Protec For Normal Diving- Advanced engine protection- Ideal filter for traditional OE recommended oil change intervals up to 10,000 miles- Cellulose and resin filter media provides up to 96.5% dirt trapping efficiency- Performs well in everyday normal driving conditions such as city and highway travel- Nitrile gasket- Solid metal end caps provide positive seal
This Part Fits the Following OEM/Substitute Numbers:
102867, 27356, 3323, 37356, 47356, 57356, 57356XP, 618-57356, 67356, 67356BP, 67356X, 7356, 763, 8-57356, 84356, C-1614, C-1821XPL, DG7317...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2022 - INFINITI QX80 | V | 5552 | United States | 8 Cyl 5.6L | - |
Showing 1 - 10 of 50 products
Loading...