Shop By Product Matching "S6"
Choose a Model for your 2023 Mitsubishi
Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Mitsubishi Mirage | L | 1193 | 3 Cyl 1.2L | BE | 73 |
- NGK G-Power Platinum Spark Plug
- Gap 0.044"
- G-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Bkr6egp
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Bkr6egp
- Resistor Type: Yes
- Stock Number: 7092
- Ground Electrode Tip Design: Trapezoid
- Pre-Gap Size:
- .040
- 1.0
- Ground Electrode Core Material: Nickel
- Material Grade: Platinum
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Platinum
- Skirt Length: 0.0
- Manufacturer Heat Range: 6
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 1.99
- 50.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
- SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
- NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
19, 3068, 3071, 3071-2, 3071S, 3340, 3340-2, 3344, 3346, 3346-2, 4027, 4227, 4504, 4702, 5, 6705, 6724, 6730...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2023 - Mitsubishi RVR | L | 1998 | GAS | 4 Cyl 2.0L | 122 |
- 9005;100% Fitment;Compact and Powerful;Patented Thermal Management
- W/ HID HEADLAMPS
- COMPACT + POWERFUL: Introducing the revolutionary Tiny Monster Concept Series LED Performance Bulbs. You will be amazed by the power output of such a compact bulb. Conversion of headlights and fog lights to LED has never been easier.
- Product Attributes:
- Power Consumption: 18 Watt
- Light Output: 6,000 Lumen Per Kit
- IP Rating: Ip67
- Amp Draw per Bulb: 1.3 Amps @ 13v Dc
- Color Temperature: 6,500 Kelvin
- Operating Voltage: 7.5-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
-
Features:
- Each kit produces a powerful 6,000 lumen light output
- Precision optics designed for long range visibility and zero glare
- Patented INTGCool integrated heat sink allowing for plug & play installation as easy as replacing a stock bulb
- SmartDrive technology with built-in advance
- Temperature regulation provides dependable operation at full intensity
- TopAim bulb head 360degree rotates for optimal beam pattern
- Durable and shock resistant build for all weather driving
- Concept Series LED Performance Bulbs. Get both a sleek look and improved visibility for safer driving at night with these powerful LED bulbs. With a combined output of 6,000 lumens, these bulbs easily outperform halogen bulbs and even the average quality LED bulbs on the market. Our patented, integrated heat sink design is a breakthrough for headlight and fog light conversions which brings a real Plug & Play experience to users. Converting to LED is as easy as replacing a stock bulb.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Mitsubishi RVR | High Beam |
- 9005;100% Fitment;Compact and Powerful;Patented Thermal Management
- W/ HALOGEN CAPSULE HEADLAMPS
- COMPACT + POWERFUL: Introducing the revolutionary Tiny Monster Concept Series LED Performance Bulbs. You will be amazed by the power output of such a compact bulb. Conversion of headlights and fog lights to LED has never been easier.
- Product Attributes:
- Power Consumption: 18 Watt
- Light Output: 6,000 Lumen Per Kit
- IP Rating: Ip67
- Amp Draw per Bulb: 1.3 Amps @ 13v Dc
- Color Temperature: 6,500 Kelvin
- Operating Voltage: 7.5-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
-
Features:
- Each kit produces a powerful 6,000 lumen light output
- Precision optics designed for long range visibility and zero glare
- Patented INTGCool integrated heat sink allowing for plug & play installation as easy as replacing a stock bulb
- SmartDrive technology with built-in advance
- Temperature regulation provides dependable operation at full intensity
- TopAim bulb head 360degree rotates for optimal beam pattern
- Durable and shock resistant build for all weather driving
- Concept Series LED Performance Bulbs. Get both a sleek look and improved visibility for safer driving at night with these powerful LED bulbs. With a combined output of 6,000 lumens, these bulbs easily outperform halogen bulbs and even the average quality LED bulbs on the market. Our patented, integrated heat sink design is a breakthrough for headlight and fog light conversions which brings a real Plug & Play experience to users. Converting to LED is as easy as replacing a stock bulb.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Mitsubishi Outlander PHEV | High Beam |
- Oil Drain Plug Pilot Point M14-1.50, Head Size 16Mm
- 16 mm Head M14 x 1.50 Thread Package Quantity: 5 Dorman - AutoGrade - Boxed Packaging Type: Box Thread Pitch: 1.5 mm
- Product Attributes:
- Método de drenaje: Tradicional
- Threads Per Inch: 0
- SAE or Metric:
- Metric
- Métrico
- Magnetic:
- No
- Non
- Thread Pitch: 1.5
- Thread Type:
- Fine
- Fino
- Oversized Thread:
- No
- Non
- Bolt Grade: 5.8
- Describir el tipo: Punta Piloto
- Special Tool Required:
- No
- Non
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Gasket Type:
- Gasket
- Junta
- Color:
- Plateado
- Silver
- Socket Points: M6 -1.0
- Head Tool Size: 16 Mm
- Thread Diameter: 14
- Contenidos del paquete: 5 Tapones De Drenaje De Aceite
- Describe Type: Pilot Point
- Head Drive Type:
- Hex
- Hexagonal
- Material:
- Acero
- Steel
- Drain Method: Conventional
-
Features:
- Direct replacement - this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution - engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction - designed and manufactured to strict specifications for reliable performance
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
This Part Fits the Following OEM/Substitute Numbers:
0924714027, 0B6S710404A, 1013938, 1027, 113115193, 1151785Z00, 1151786Z00, 1151786Z02, 11569943, 12582347, 17613pk, 2151221000, 2151221010, 2151223000, 2151223001, 215122X000, 263-917, 323276...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Mitsubishi RVR | L | 1998 | 4 Cyl 2.0L | 122 |
- WIX Spin-On Lube Filter
- Original Equipment Part Number MZ 690072 Also Available In Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.685
- Burst Pressure: 363
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 9-11 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
This Part Fits the Following OEM/Substitute Numbers:
0151855, 0FE00380, 102867, 1150105980, 1502006, 15208-31U00, 15208-31U01, 15208-7B000, 1520831U00L, 1520831U0A, 1520831U0B, 1520831U1B, 152089E01A, 15208HC400, 15208HC401, 15400-PLC-003, 15400-PLC-004, 15400-PLM-A01...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2023 - Mitsubishi RVR | L | 2360 | Canada | 4 Cyl 2.4L | 144 |
- NGK Ruthenium HX High Ignitability Spark Plug
- Gap 0.044"
- Ruthenium HX High Ignitability Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Service Number: Fr6ahx-s
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Fr6ahx-s
- Resistor Type: Yes
- Stock Number: 94279
- Ground Electrode Tip Design: Dual Fine Electrode (dfe) - High Ignitability
- Pre-Gap Size:
- .044
- 1.1
- Ground Electrode Core Material: Nickel
- Material Grade: Ruthenium
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Ruthenium
- Skirt Length: 0.0
- Manufacturer Heat Range: 6
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 1.99
- 50.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- PLATINUM PIN TYPE GROUND ELECTRODE: Provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
- RECOMMENDED USAGE: Modern vehicles using OE DFE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RUTHENIUM ALLOY CENTER ELECTRODE: NGK's patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
- HIGH IGNITABILITY DOUBLE FINE ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with opposed fine wire platinum ground electrode
- NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE technology as a high ignitability plug; Ruthenium HX spark plugs come with patented, specialized OEM DFE and PSPE tip designs. NGK Ruthenium HX High Ignitability spark plugs provide a more complete fuel burn resulting in a quicker throttle response, smoother idle and better cold starts. Ruthenium center electrode provides industry leading durability.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
09482-00494, 09482-00508, 09482-00510, 09482-00548, 09482-00550, 09842-00508, 0SP00479, 101000054AC, 101000054AD, 101905615A, 101905616, 11109-84Z10, 11109-86Z00, 12120032134, 12120032135, 12120141871, 12129069877, 12129071003...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2023 - Mitsubishi RVR | L | 1998 | GAS | 4 Cyl 2.0L | 122 |
- Black
- All Weather Floor Mats; Black; Rear;
- All Weather Floor Mats
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Made Of Natural Heavy Duty Rubber
- Deeply Sculpted Channels
- Designed To Trap Water/Road Salt/Mud And Sand
- Made Of 16 lbs. Of Pliable Natural Rubber
- Will Not Curl/Crack/Harden In Sub-Zero Weather
- Anti-Skid Ridges To Prevent Shifting
- Protective Non-Stick Finish For Quick Cleanup
- Hold Up To 1.5 Quarts Of Water Without Spilling
- The WeatherTech All-Weather Floor Mats have deeply sculpted channels designed to trap water, road salt, mud and sand. They wont curl, crack or harden in sub-zero weather. Our All-Weather Floor Mats also have anti-skid ridges to prevent shifting in your vehicle and come with a protective, non-stick finish to make cleanup quick and easy. Choose from Black, Tan or Grey to complement virtually any interior color. Includes a 10 year warranty.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Mitsubishi Outlander Sport | Rear |
- FRAM, TG7317, Oil Filter
- Spin-on Oil Filter
- Tough Guard
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.218
- Non Slip Grip: Yes
- Gasket Thickness: 0.281
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 350.000
- Gasket Type: Base
- Housing Color: Silver
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15
- Grade: Premium
- Gasket Outside Diameter: 2.484
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- SureGrip® technology for easy install and removal
- Synthetic blend media provides 99% dirt holding capacity
- Silicone anti-drain back valve helps ensure safe engine start up
- Engineered for tough driving conditions, stop and go traffic, and hot and cold temperatures
- Proven protection for up to 15,000 miles (24,000 kilometers)
- FRAM Tough Guard® oil filters are designed for tough driving conditions, stop and go traffic, and hot and cold temperatures. The synthetic blend media is engineered to perform with conventional and synthetic motor oil. Equipped with SureGrip® technology, FRAM Tough Guard oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 15,000 miles (24,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
041-8075, 041-8135, 0A45310244, 1230A152, 12582255, 1356, 150-1009, 150-1010, 15208-31U00, 15208-31U01, 15208-31U0A, 15208-31U0B, 15208-65F0C, 15208-9E000, 15208-9E01A, 15208-AA15A, 15208-AA160, 15208-PLM-A02...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Mitsubishi Outlander Sport | L | 1998 | 4 Cyl 2.0L | 122 |
- FRAM, PH7317, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.218
- Non Slip Grip: Yes
- Gasket Thickness: 0.281
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 350.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15
- Grade: Advanced
- Gasket Outside Diameter: 2.484
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- Silicone anti-drain back valve helps ensure safe engine start up
- SureGrip® technology for easy install and removal
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
041-8075, 041-8135, 0A45310244, 1230A152, 12582255, 1356, 150-1009, 150-1010, 15208-31U00, 15208-31U01, 15208-31U0A, 15208-31U0B, 15208-65F0C, 15208-9E000, 15208-9E01A, 15208-AA15A, 15208-AA160, 15298-31U1B...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Mitsubishi RVR | L | 2360 | 4 Cyl 2.4L | 144 |
Showing 1 - 10 of 12 products
Loading...