Image
Product
Price
- NGK G-Power Platinum Spark Plug
- Gap 0.044"
- G-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Bkr5egp
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Bkr5egp
- Resistor Type: Yes
- Stock Number: 7090
- Ground Electrode Tip Design: Trapezoid
- Pre-Gap Size:
- .040
- 1.0
- Ground Electrode Core Material: Nickel
- Material Grade: Platinum
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Platinum
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 1.99
- 50.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
- SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
- PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
3034, 3412, 3412-2, 3436, 3436-2, 3980, 41-800, 4202, 4503, 4507, 4701, 6702, 6726, 6730, 696202, 7090, AGSP32FSM, AP3924...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Toyota Matrix | L | 1794 | 1ZZ-FE | 4 Cyl 1.8L | - |
- NGK G-Power Platinum Spark Plug
- Gap 0.032"
- G-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Bkr5egp
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Bkr5egp
- Resistor Type: Yes
- Stock Number: 7090
- Ground Electrode Tip Design: Trapezoid
- Pre-Gap Size:
- .040
- 1.0
- Ground Electrode Core Material: Nickel
- Material Grade: Platinum
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Platinum
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 1.99
- 50.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
- SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
- PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Toyota Echo | L | 1497 | 4 Cyl 1.5L | 91 |
- NGK G-Power Platinum Spark Plug
- Factory Spark Plugs are Multi-Ground Electrode Gap 0.044" Optional Single Ground Electrode Spark Plug
- G-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Bkr5egp
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Bkr5egp
- Resistor Type: Yes
- Stock Number: 7090
- Ground Electrode Tip Design: Trapezoid
- Pre-Gap Size:
- .040
- 1.0
- Ground Electrode Core Material: Nickel
- Material Grade: Platinum
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Platinum
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 1.99
- 50.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
- SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
- PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Toyota Tacoma | V | 3378 | 6 Cyl 3.4L | - |
- 3 1/2 In. Pulley Re-Use Exsisting OE Bolt and Washer
- Product Attributes:
- :
- 30
- 90
- Max Belt Width: 06 Rib
- Bearing Inner Diameter 1: 17
- Number of Bearings: 1
- Flat: Y
- Material: Steel
- Belt Type: Serpentine
- :
This Part Fits the Following OEM/Substitute Numbers:
06003045, 10129561, 10141997, 10179211, 10187650, 12552361, 12555244, 12555245, 12555609, 12557819, 12564505, 12564510, 12580771, 12580773, 15662645, 16603-0W030, 17540-77EA1, 1FP0-32-700...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Toyota Sequoia |
- Jounce Bumper and Bellows
- Boot Kits
-
Features:
- Superior quality boot helps protect the strut shaft from leak-causing dirt and debris
- Poly foam bumper prevents the strut from bottoming out
- Built with design and quality that matches or exceeds OE
- Protects the upper seal and bushing
- KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Toyota Solara | Rear |
- Jounce Bumper and Bellows
- Some Toyotas and Hondas use a one-piece upper spring insulator and boot/bellows. Using this replacement boot/bellows requires cutting off and re-using the original upper spring insulator portion.
- Boot Kits
-
Features:
- Superior quality boot helps protect the strut shaft from leak-causing dirt and debris
- Poly foam bumper prevents the strut from bottoming out
- Built with design and quality that matches or exceeds OE
- Protects the upper seal and bushing
- KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
143057, 63619
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Toyota Celica | Front |
- ANCO 31-Series Wiper Blade (16")
- OE Design this is a 16'' 9 x 3 Hook Conventional Wiper Blade
- 9mm Hook, 9x4 Hook, 3/16" Side Lock, 7mm Bayonet
- ANCO 31-Series Wiper Blade
- Product Attributes:
- Salability Restrictions: N
- Number of Wiping Edges: 1
- Frame Material: Steel
- AAP_UDA_4: 110
- Pressure Point Quantity: 4
- Contains Electronic Components: No
- Engine Specific: N
- AAP_UDA_129: N
- Frame Color: Black
- AAP_UDA_125: N
- AAP_UDA_126: N
- AAP_UDA_127: N
- Is Item A Chemical: No
- Blade Type: Conventional
- Adapter Type: Pre-attached Adapter
- Adapters Required: Yes
- Snowmobile: N
- Personal Watercraft: N
- Winter Blade: No
- Is Or Contains A Battery: No
- Variable Speed: No
- Shipping Exclusions: N
- High Performance: Y
- Attached Spoiler/Aerofoil: No
- AAP_UDA_132: N
- California Proposition 65 Warning Type: N/a
- AAP_UDA_133: N
- Is Or Contains A Bulb: No
- Adapters Included: Yes
- Motorcycle ATV: N
- Non-Vehicle Specific: N
- AAP_UDA_130: Y
- AAP_UDA_131: N
- Wiper Blade Connection Type: 3/16 Side Lock, 7mm Bayonet, 7mm Hook, 8mm Hook, 9x3 Hook, 9x4 Hook, Pin Type Side Lock
- AAP_UDA_119: Y
- Transmission Specific: N
- Refillable: Yes
- Small Engine: N
-
Features:
- Available in 10" - 28" lengths
- Consistent, clear wipe in any driving environment
- Vented bridge and high performance polymer ensure OE fit and function
- Conventional Wiper Blade
- DuraKlear exclusive rubber compound provides a consistent streak-free wipe
- Affordable conventional blade replacement
- KwikConnect Installation System provides quick and easy wiper blade replacement
- ANCO 31-Series conventional wiper blades offer a vented bridge and high performance polymer that ensures OE fit and function. They are equipped with our proprietary Kwik Connect Installation System, our exclusive Duraklear rubber compound, and our poly link structure which allows for a smooth, quiet operation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Toyota Celica | Front Right |
- ANCO 31-Series Wiper Blade (16")
- OE Design this is a 16'' 9 x 3 Hook Conventional Wiper Blade
- 9mm Hook, 9x4 Hook, 3/16" Side Lock, 7mm Bayonet
- ANCO 31-Series Wiper Blade
- Product Attributes:
- Salability Restrictions: N
- Number of Wiping Edges: 1
- Frame Material: Steel
- AAP_UDA_4: 110
- Pressure Point Quantity: 4
- Contains Electronic Components: No
- Engine Specific: N
- AAP_UDA_129: N
- Frame Color: Black
- AAP_UDA_125: N
- AAP_UDA_126: N
- AAP_UDA_127: N
- Is Item A Chemical: No
- Blade Type: Conventional
- Adapter Type: Pre-attached Adapter
- Adapters Required: Yes
- Snowmobile: N
- Personal Watercraft: N
- Winter Blade: No
- Is Or Contains A Battery: No
- Variable Speed: No
- Shipping Exclusions: N
- High Performance: Y
- Attached Spoiler/Aerofoil: No
- AAP_UDA_132: N
- California Proposition 65 Warning Type: N/a
- AAP_UDA_133: N
- Is Or Contains A Bulb: No
- Adapters Included: Yes
- Motorcycle ATV: N
- Non-Vehicle Specific: N
- AAP_UDA_130: Y
- AAP_UDA_131: N
- Wiper Blade Connection Type: 3/16 Side Lock, 7mm Bayonet, 7mm Hook, 8mm Hook, 9x3 Hook, 9x4 Hook, Pin Type Side Lock
- AAP_UDA_119: Y
- Transmission Specific: N
- Refillable: Yes
- Small Engine: N
-
Features:
- Available in 10" - 28" lengths
- Consistent, clear wipe in any driving environment
- Vented bridge and high performance polymer ensure OE fit and function
- Conventional Wiper Blade
- DuraKlear exclusive rubber compound provides a consistent streak-free wipe
- Affordable conventional blade replacement
- KwikConnect Installation System provides quick and easy wiper blade replacement
- ANCO 31-Series conventional wiper blades offer a vented bridge and high performance polymer that ensures OE fit and function. They are equipped with our proprietary Kwik Connect Installation System, our exclusive Duraklear rubber compound, and our poly link structure which allows for a smooth, quiet operation.
This Part Fits the Following OEM/Substitute Numbers:
02-7075205, 14008193, 16-1, 16-2, 16-51, 16-52, 1623088-C1, 1668394, 1690023-C91, 170397, 1704770, 1707397, 1708044, 22122111, 2580416, 2580417, 2771906, 2889847...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Toyota Land Cruiser | Rear |
- Jounce Bumper and Bellows
- Some Toyotas and Hondas use a one-piece upper spring insulator and boot/bellows. Using this replacement boot/bellows requires cutting off and re-using the original upper spring insulator portion.
- Boot Kits
-
Features:
- Superior quality boot helps protect the strut shaft from leak-causing dirt and debris
- Poly foam bumper prevents the strut from bottoming out
- Built with design and quality that matches or exceeds OE
- Protects the upper seal and bushing
- KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
143058, 63618
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Toyota Highlander | Front |
- Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter
- Joint Diameter 3.44 In. Uni-Fit
- Product Attributes:
- Shaft End Inside Diameter: 0.98
- Boot Color:
- Black
- Negro
- Noir
- Split Or Solid Type:
- Solid
- Sólido
- Boot Material:
- Neoprene
- Neopreno
- Rib Quantity: 6
- Contenidos del paquete:
- 1 Fuelle De Junta Homocinética
- 1 Paquete De Grasa De Junta Homocinética
- 2 Grampas
- Vented Boot:
- No
- Non
- Joint End Inside Diameter: 3.44
-
Features:
- Direct replacement - this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
- Ideal solution - this kit is a reliable replacement for original components that have failed due to wear
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.
This Part Fits the Following OEM/Substitute Numbers:
103-2623, 1032281, 1032288, 1032623, 1032640, 1032743, 2423, 2456, 2460, 2482, 2487, 4433, 4436, 4450, 4468, 4483, 4496, 5400...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2004 - Toyota Tacoma | Outer | 4WD |
Showing 1 - 10 of 148 products
Loading...