Image
Product
Price
- Texture Black
- TRECK Spare Tire Winch Relocation Mount; Texture Black;
- TRECK Spare Tire Winch Relocation Mount
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Bisphenol And Zinc Which Is Known To The State Of California To Cause Cancer; Birth Defects; Eye Damage; And Allergic Skin Conditions. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- TRECK Spare Tire Winch Relocation Mount
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Chevrolet Silverado 2500 |
- BD TowMaster Dodge 48RE Transmission & Converter Package 2003-2004 4wd c/w TapShifter
- 4wd; Includes Heavy Duty Pan And Auxiliary Fluid Filter Kit; Includes torque converte and TapShifterr;
- BD TowMaster Dodge 48RE Transmission & Converter Package - 2003-2004 4wd c/w TapShifter
- Transmission 48RE
- Product Attributes:
- Drivetrain: 4wd
- Category: Auto Trans & Converter Packages
- Engine: 5.9l Cummins 03-04
- Suggested Product: 1041210
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Every transmission is tested on a dyno
- Not warranted for Race or Sled Pull use
- TORQUE CONVERTOR:
- Torque multiplying cast aluminum stators
- Lower rpm response than the stock converter
- More efficient operation
- Less heat and better fuel economy
- Stamp-forged steel front cover
- Furnace-brazed fins
- TRANSMISSION:
- Up to triple the amount of lock-up clutch material
- Clutch Count: DIRECT 6
- Clutch Count: FORWARD 5
- Clutch Count: OD 6
- Clutch Count: OD DIRECT 10
- High temp/energy Raybestos band
- Upgraded Valvebody
- Billet band lever
- Billet band strut
- Upgraded governor solenoid
- Stock thrust bushings replaced with roller Torrington bearings
- Drilled intermediate shaft for increased lubrication
- Upgraded governor pressure transducer (47RE/48RE) - Twice the burst pressure than stock
- Increased line pressure to 190-200psi
- No shuttle shifting problems
- BD rigid aluminum heavy duty transmission pan
- Pan adds 2qt extra oil capacity
- Pan heat-dissipating fins keep temperature down
- Magnetic drain plug
- Modified manual valve for lube in all positions
- Increase the durability of your drivetrain
- Enhanced Stall - Street/Towing applications
- BD auxiliary full flow filter kit for extra protection
- Cooler line case saver in every transmission
- When you purchase a BD transmission and torque converter package, you are getting a matched set that has been dyno tested together for ultimate performance, and reliability. Every transmission comes with BD's own Heavy Duty pan that adds extra fluid capacity. For towing, street or track, when it comes to a dependable transmission that will stand up to your diesel's power and torque demands, the clear choice is BD.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- BD TowMaster Dodge 48RE Transmission & Converter Package 2003-2004 2wd c/w TapShifter
- 2wd; Includes torque converter and TapShifter;
- BD TowMaster Dodge 48RE Transmission & Converter Package - 2003-2004 2wd c/w TapShifter
- Transmission 48RE
- Product Attributes:
- Drivetrain: 2wd
- Category: Auto Trans & Converter Packages
- Engine: 5.9l Cummins 03-04
- Suggested Product: 1041210
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- TRANSMISSION:
- Up to triple the amount of lock-up clutch material
- Clutch Count: DIRECT 6
- Clutch Count: FORWARD 5
- Clutch Count: OD 6
- Clutch Count: OD DIRECT 10
- High temp/energy Raybestos band
- Upgraded Valvebody
- Billet band lever
- Billet band strut
- Upgraded governor solenoid
- Stock thrust bushings replaced with roller Torrington bearings
- Drilled intermediate shaft for increased lubrication
- Upgraded governor pressure transducer (47RE/48RE) - Twice the burst pressure than stock
- Increased line pressure to 190-200psi
- No shuttle shifting problems
- BD rigid aluminum heavy duty transmission pan
- Pan adds 2qt extra oil capacity
- Pan heat-dissipating fins keep temperature down
- Magnetic drain plug
- Modified manual valve for lube in all positions
- Increase the durability of your drivetrain
- Enhanced Stall - Street/Towing applications
- BD auxiliary full flow filter kit for extra protection
- Cooler line case saver in every transmission
- Every transmission is tested on a dyno
- Not warranted for Race or Sled Pull use
- TORQUE CONVERTOR:
- Torque multiplying cast aluminum stators
- Lower rpm response than the stock converter
- More efficient operation
- Less heat and better fuel economy
- Stamp-forged steel front cover
- Furnace-brazed fins
- When you purchase a BD transmission and torque converter package, you are getting a matched set that has been dyno tested together for ultimate performance, and reliability. Every transmission comes with BD's own Heavy Duty pan that adds extra fluid capacity. For towing, street or track, when it comes to a dependable transmission that will stand up to your diesel's power and torque demands, the clear choice is BD.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- 3in. Nerf Bars-Polished SST
- Polished; [AWSL] Rocker Mount
- LUVERNE 460921 Round Nerf Bars (3 Inch Tubular Polished Stainless Steel)-1 Pair
- 3 in. Round Nerf Bars
- Product Attributes:
- Side Application Type: Cab Only
-
Features:
- 3 in. Diameter Round Tube w/Long-Lasting Stainless Steel Construction
- High-Polish Stainless Steel Finish For A Bright Rust-Free Shine
- Heavy-Duty Mandrel-Bent Tubing For Superior Strength And Contour
- Tough Factory-Installed Pads Provide A Secure Non-Skid Surface
- Easy No-Drill Installation w/Vehicle-Specific Mounting Brackets
- High-Strength Steel Brackets Feature A Durable Black Powder Coat
- Limited Lifetime Warranty [One-Year Parts]
- Made in USA
- LUVERNE 3 in. round nerf bars provide a rust-free accent and a reliable step up into your truck or SUV. They feature a made-in-USA, vehicle-specific design to contour to each unique make and model, and they are constructed from durable stainless steel to be impervious to rust. With non-skid step pads and heavy-duty, mandrel-bent tubing, these 3 in. nerf bars offer safe vehicle entry and exit, and they are available in two finish options for the look that best complements your vehicle. One of the greatest threats to nerf bars, running boards and side steps is rust. Whether youre braving the uncertainty of the off-road trail or just commuting back and forth to work every day, rain, road salt and dirt can quickly cover your nerf bars in a layer of unsightly rust. That is why both finish options of our 3 in. round nerf bars begin with heavy-duty stainless steel tubing. Stainless steel makes these nerf bars strong and rust-free, ensuring a reliable step and a stylish accent for your vehicle, mile after mile. We then finish our 3 in. nerf bars in your choice of high-polish stainless steel for a bright, clean look or a durable, textured black powder coat for ultimate corrosion resistance. While rust protection is a vital attribute of any side accessory, a custom fit is also important. We manufacture our 3 in. nerf bars right here in the USA from mandrel-bent tubing to give them a smooth, sleek appearance. Each one is designed vehicle-specific to contour to the unique shape of each make and model. The tough, factory-installed step pads are also custom-placed to match the layout of your vehicle, featuring a rugged, non-skid surface to provide a comfortable step and safe entry and exit every time. LUVERNE 3 in. round nerf bars install using high-strength vehicle-specific mounting brackets for a perfect fit. The brackets allow for complete elimination of drilling during the install, and they feature a durable black powder coat finish for lasting protection against corrosion.
Additional Fitment Information:
| Vehicle | Sub Model | Body |
|---|---|---|
| 2004 - Ford F-150 | XL | Standard Cab Pickup |
- 3in. Nerf Bars-Powder Coated Black SST
- Black Textured Powder Coat; [AWSL] Rocker Mount
- LUVERNE 450921 Black Nerf Bars (3 Inch Round Tubular Black Powder-Coated Stainless Steel)-1 Pair
- 3 in. Round Nerf Bars
- Product Attributes:
- Side Application Type: Cab Only
-
Features:
- 3 in. Diameter Round Tube w/Long-Lasting Stainless Steel Construction
- Textured Powder Coat Finish For Maximum Corrosion Resistance
- Heavy-Duty Mandrel-Bent Tubing For Superior Strength And Contour
- Tough Factory-Installed Pads Provide A Secure Non-Skid Surface
- Easy No-Drill Installation w/Vehicle-Specific Mounting Brackets
- High-Strength Steel Brackets Feature A Durable Black Powder Coat
- Limited Lifetime Warranty [Five-Year Finish One-Year Parts]
- Made in USA
- LUVERNE 3 in. round nerf bars provide a rust-free accent and a reliable step up into your truck or SUV. They feature a made-in-USA, vehicle-specific design to contour to each unique make and model, and they are constructed from durable stainless steel to be impervious to rust. With non-skid step pads and heavy-duty, mandrel-bent tubing, these 3 in. nerf bars offer safe vehicle entry and exit, and they are available in two finish options for the look that best complements your vehicle. One of the greatest threats to nerf bars, running boards and side steps is rust. Whether youre braving the uncertainty of the off-road trail or just commuting back and forth to work every day, rain, road salt and dirt can quickly cover your nerf bars in a layer of unsightly rust. That is why both finish options of our 3 in. round nerf bars begin with heavy-duty stainless steel tubing. Stainless steel makes these nerf bars strong and rust-free, ensuring a reliable step and a stylish accent for your vehicle, mile after mile. We then finish our 3 in. nerf bars in your choice of high-polish stainless steel for a bright, clean look or a durable, textured black powder coat for ultimate corrosion resistance. While rust protection is a vital attribute of any side accessory, a custom fit is also important. We manufacture our 3 in. nerf bars right here in the USA from mandrel-bent tubing to give them a smooth, sleek appearance. Each one is designed vehicle-specific to contour to the unique shape of each make and model. The tough, factory-installed step pads are also custom-placed to match the layout of your vehicle, featuring a rugged, non-skid surface to provide a comfortable step and safe entry and exit every time. LUVERNE 3 in. round nerf bars install using high-strength vehicle-specific mounting brackets for a perfect fit. The brackets allow for complete elimination of drilling during the install, and they feature a durable black powder coat finish for lasting protection against corrosion.
Additional Fitment Information:
| Vehicle | Sub Model | Body |
|---|---|---|
| 2004 - Ford F-150 | XL | Standard Cab Pickup |
- 3in. Nerf Bars-Polished SST
- Polished; [AWSL] Rocker Mount
- LUVERNE 460921 Round Nerf Bars (3 Inch Tubular Polished Stainless Steel)-1 Pair
- 3 in. Round Nerf Bars
- Product Attributes:
- Side Application Type: Cab Only
-
Features:
- 3 in. Diameter Round Tube w/Long-Lasting Stainless Steel Construction
- High-Polish Stainless Steel Finish For A Bright Rust-Free Shine
- Heavy-Duty Mandrel-Bent Tubing For Superior Strength And Contour
- Tough Factory-Installed Pads Provide A Secure Non-Skid Surface
- Easy No-Drill Installation w/Vehicle-Specific Mounting Brackets
- High-Strength Steel Brackets Feature A Durable Black Powder Coat
- Limited Lifetime Warranty [One-Year Parts]
- Made in USA
- LUVERNE 3 in. round nerf bars provide a rust-free accent and a reliable step up into your truck or SUV. They feature a made-in-USA, vehicle-specific design to contour to each unique make and model, and they are constructed from durable stainless steel to be impervious to rust. With non-skid step pads and heavy-duty, mandrel-bent tubing, these 3 in. nerf bars offer safe vehicle entry and exit, and they are available in two finish options for the look that best complements your vehicle. One of the greatest threats to nerf bars, running boards and side steps is rust. Whether youre braving the uncertainty of the off-road trail or just commuting back and forth to work every day, rain, road salt and dirt can quickly cover your nerf bars in a layer of unsightly rust. That is why both finish options of our 3 in. round nerf bars begin with heavy-duty stainless steel tubing. Stainless steel makes these nerf bars strong and rust-free, ensuring a reliable step and a stylish accent for your vehicle, mile after mile. We then finish our 3 in. nerf bars in your choice of high-polish stainless steel for a bright, clean look or a durable, textured black powder coat for ultimate corrosion resistance. While rust protection is a vital attribute of any side accessory, a custom fit is also important. We manufacture our 3 in. nerf bars right here in the USA from mandrel-bent tubing to give them a smooth, sleek appearance. Each one is designed vehicle-specific to contour to the unique shape of each make and model. The tough, factory-installed step pads are also custom-placed to match the layout of your vehicle, featuring a rugged, non-skid surface to provide a comfortable step and safe entry and exit every time. LUVERNE 3 in. round nerf bars install using high-strength vehicle-specific mounting brackets for a perfect fit. The brackets allow for complete elimination of drilling during the install, and they feature a durable black powder coat finish for lasting protection against corrosion.
Additional Fitment Information:
| Vehicle | Sub Model | Body |
|---|---|---|
| 2004 - Ford F-150 | XL | Standard Cab Pickup |
- 3in. Nerf Bars-Powder Coated Black SST
- Black Textured Powder Coat; [AWSL] Rocker Mount
- LUVERNE 450921 Black Nerf Bars (3 Inch Round Tubular Black Powder-Coated Stainless Steel)-1 Pair
- 3 in. Round Nerf Bars
- Product Attributes:
- Side Application Type: Cab Only
-
Features:
- 3 in. Diameter Round Tube w/Long-Lasting Stainless Steel Construction
- Textured Powder Coat Finish For Maximum Corrosion Resistance
- Heavy-Duty Mandrel-Bent Tubing For Superior Strength And Contour
- Tough Factory-Installed Pads Provide A Secure Non-Skid Surface
- Easy No-Drill Installation w/Vehicle-Specific Mounting Brackets
- High-Strength Steel Brackets Feature A Durable Black Powder Coat
- Limited Lifetime Warranty [Five-Year Finish One-Year Parts]
- Made in USA
- LUVERNE 3 in. round nerf bars provide a rust-free accent and a reliable step up into your truck or SUV. They feature a made-in-USA, vehicle-specific design to contour to each unique make and model, and they are constructed from durable stainless steel to be impervious to rust. With non-skid step pads and heavy-duty, mandrel-bent tubing, these 3 in. nerf bars offer safe vehicle entry and exit, and they are available in two finish options for the look that best complements your vehicle. One of the greatest threats to nerf bars, running boards and side steps is rust. Whether youre braving the uncertainty of the off-road trail or just commuting back and forth to work every day, rain, road salt and dirt can quickly cover your nerf bars in a layer of unsightly rust. That is why both finish options of our 3 in. round nerf bars begin with heavy-duty stainless steel tubing. Stainless steel makes these nerf bars strong and rust-free, ensuring a reliable step and a stylish accent for your vehicle, mile after mile. We then finish our 3 in. nerf bars in your choice of high-polish stainless steel for a bright, clean look or a durable, textured black powder coat for ultimate corrosion resistance. While rust protection is a vital attribute of any side accessory, a custom fit is also important. We manufacture our 3 in. nerf bars right here in the USA from mandrel-bent tubing to give them a smooth, sleek appearance. Each one is designed vehicle-specific to contour to the unique shape of each make and model. The tough, factory-installed step pads are also custom-placed to match the layout of your vehicle, featuring a rugged, non-skid surface to provide a comfortable step and safe entry and exit every time. LUVERNE 3 in. round nerf bars install using high-strength vehicle-specific mounting brackets for a perfect fit. The brackets allow for complete elimination of drilling during the install, and they feature a durable black powder coat finish for lasting protection against corrosion.
Additional Fitment Information:
| Vehicle | Sub Model | Body |
|---|---|---|
| 2004 - Ford F-150 | XL | Standard Cab Pickup |
- 2001-07 TOYOTA SEQUOIA 2.0'' 'Front with 1''Rear SST Lift Kit
- 2.5 in. Front/1.5 in. Rear Lift; Includes Strut Extensions; Differential Drop Kit; Skid Plate Spacers; Rear Spring Spacers; All Hardware;
- ReadyLIFT 2001-2007 TOYOTA SEQUOIA 2.0'' 'Front with 1''Rear SST Lift Kit
- "SST - 2.5"" Lift Kit"
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Toyota Sequoia |
- 2003-08 HONDA PILOT 2.0'' Front with 1.0'' Rear SST Lift Kit
- 2 in. Front/1 in. Rear Lift; Includes Front/Rear Extensions; Lower Strut Spacer; Rear Sway Bar End Links; Rear Camber Arms;
- ReadyLIFT 2003-2008 HONDA PILOT 2.0'' Front with 1.0'' Rear SST Lift Kit
- "SST - 2"" Lift Kit"
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Honda Pilot |
- 2004-14 NISSAN ARMADA/TITAN 2.0'' 'Front with 1''Rear SST Lift Kit
- 2 in. Front/1 in. Rear Lift;
- ReadyLIFT 2004-2014 NISSAN ARMADA/TITAN 2.0'' 'Front with 1''Rear SST Lift Kit
- "SST - 2"" Lift Kit"
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Nissan Titan |
Showing 1 - 10 of 20 products
Loading...