Image
Product
Price
- Black; Performance Polyurethane
- Body Mount Set; Black; Performance Polyurethane;
- Body Mount Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Reproductive Harm
-
Features:
- Replace To Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
- Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off! And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break.Energy's specially formulated Hyper-Flex(TM) polyurethane cab and body mounts combine the best qualities of both: they're soft enough for a smooth ride, yet rugged enough for the most demanding road or track.Most sets have a strong zinc plated steel ring molded into them - for added durability and when the application requires it.
Additional Fitment Information:
| Vehicle |
|---|
| 1965 - Toyota Land Cruiser |
- B8 5125-Shock Absorber
- For 234.5mm Hub; Comp Bump Stop On Chassis May Need Modified To Prevent Damage To Shock;w/4 in. Lift;
- 46mm Monotube Shock Absorber
- B8 5125 Shock Absorber
- Product Attributes:
- Rebound @0.52m/s: 2550
- Mount Type: Eye-to-eye
- Internal Design: Monotube
- Collapsed Length Rounded: 14 In.
- Collapsed Length:
- 14.130 In.
- 359mm
- Upper Mount Type: Eye 0.625 In.
- Extended Length Rounded: 23 In.
- Body Inside Diameter: 46mm
- WARNING CA Proposition 65: Yes
- Body Design: Smooth Body (non-coilover)
- Rebound @0.26m/s: 2550
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
- Boot Included: Black Bellows
- Lower Mount Type: Eye 0.625 In.
- Extended Length:
- 22.580 In.
- 573.5mm
- Compression @0.52m/s: 700
-
Features:
- Bilstein 5100 Series
- Monotube Gas Pressure Construction
- Designed For Consistent Fade-Free Performance
- Self-Adjusting Deflective Disc Valving
- High-Flow Piston Reduces Harshness
- Available In Stem-To-Eye/Eye-To-Eye Mounting Configurations
- Zinc Coating For Resistance To Off-Road Elements
- Custom Valving Available
- Factory Rebuildable
- Made In The USA
- Bilstein B8 5125 shock absorbers are designed for custom applications and are a perfect solution for vehicles that do not have a direct Bilstein fitment. These high gas pressure monotube shock absorbers are sold by various lengths and valve rates to accommodate a wide range of uses and custom fitments. All B8 5125 shock absorbers come equipped with industry standard 5/8 inch hour glass bushings and are available in either an eye/eye or stem/eye mount configuration. The shock absorbers feature a 46mm piston with self-adjusting deflective disc valving. Bilstein B8 5125 shock absorbers are the ideal choice for custom suspension builders.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
33185606, 465293, BE5-6253, F4-BE5-6253-H5
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1965 - Toyota Land Cruiser | L | 3878 | Front | 6 Cyl 3.9L | - |
- B8 5125-Shock Absorber
- w/4 in. Lift;
- 46mm Monotube Shock Absorber
- B8 5125 Shock Absorber
- Product Attributes:
- Rebound @0.52m/s: 2550
- Mount Type: Eye-to-eye
- Internal Design: Monotube
- Collapsed Length Rounded: 16 In.
- Collapsed Length:
- 15.910 In.
- 404mm
- Upper Mount Type: Eye 0.625 In.
- Extended Length Rounded: 26 In.
- Body Inside Diameter: 46mm
- WARNING CA Proposition 65: Yes
- Body Design: Smooth Body (non-coilover)
- Rebound @0.26m/s: 2550
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
- Boot Included: Black Bellows
- Lower Mount Type: Eye 0.625 In.
- Extended Length:
- 25.930 In.
- 658.5mm
- Compression @0.52m/s: 700
-
Features:
- Bilstein 5100 Series
- Monotube Gas Pressure Construction
- Designed For Consistent Fade-Free Performance
- Self-Adjusting Deflective Disc Valving
- High-Flow Piston Reduces Harshness
- Available In Stem-To-Eye/Eye-To-Eye Mounting Configurations
- Zinc Coating For Resistance To Off-Road Elements
- Custom Valving Available
- Factory Rebuildable
- Made In The USA
- Bilstein B8 5125 shock absorbers are designed for custom applications and are a perfect solution for vehicles that do not have a direct Bilstein fitment. These high gas pressure monotube shock absorbers are sold by various lengths and valve rates to accommodate a wide range of uses and custom fitments. All B8 5125 shock absorbers come equipped with industry standard 5/8 inch hour glass bushings and are available in either an eye/eye or stem/eye mount configuration. The shock absorbers feature a 46mm piston with self-adjusting deflective disc valving. Bilstein B8 5125 shock absorbers are the ideal choice for custom suspension builders.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
33185552, 465288, BE5-6248, F4-BE5-6248-H5
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1965 - Toyota Land Cruiser | L | 3878 | Rear | 6 Cyl 3.9L | - |
- B8 5125-Shock Absorber
- w/0 - 2 in. Lift;
- 46mm Monotube Shock Absorber
- B8 5125 Shock Absorber
- Product Attributes:
- Rebound @0.52m/s: 2550
- Mount Type: Eye-to-eye
- Internal Design: Monotube
- Collapsed Length Rounded: 12 In.
- Collapsed Length:
- 12.070 In.
- 306.5mm
- Upper Mount Type: Eye 0.625 In.
- Extended Length Rounded: 19 In.
- Body Inside Diameter: 46mm
- WARNING CA Proposition 65: Yes
- Body Design: Smooth Body (non-coilover)
- Rebound @0.26m/s: 2550
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
- Boot Included: Black Bellows
- Lower Mount Type: Eye 0.625 In.
- Extended Length:
- 18.500 In.
- 470mm
- Compression @0.52m/s: 700
-
Features:
- Bilstein 5100 Series
- Monotube Gas Pressure Construction
- Self-Adjusting Deflective Disc Valving
- High-Flow Piston Reduces Harshness
- Independent Rebound And Compression Tuning
- Larger Working Piston Area For Exact Damping
- Superior Control For Large Diameter Tires
- Zinc-Plated Steel Body
- Bilstein B8 5125 shock absorbers are designed for custom applications and are a perfect solution for vehicles that do not have a direct Bilstein fitment. These high gas pressure monotube shock absorbers are sold by various lengths and valve rates to accommodate a wide range of uses and custom fitments. All B8 5125 shock absorbers come equipped with industry standard 5/8 inch hour glass bushings and are available in either an eye/eye or stem/eye mount configuration. The shock absorbers feature a 46mm piston with self-adjusting deflective disc valving. Bilstein B8 5125 shock absorbers are the ideal choice for custom suspension builders.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
217795, 33062518, BE5-6251, F4-BE5-6251-H7, F4-BE5-6251-H8
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1965 - Toyota Land Cruiser | L | 3878 | Front | 6 Cyl 3.9L | - |
- 4 in. Lift; Includes Front and Rear Leaf Springs; U-Bolts; Hardware; Front and Rear Premium N3 Shocks Superseded From PN[735.20]
- Suspension Lift Kit w/Shocks; 4 in. Lift; Includes Front and Rear Leaf Springs; U-Bolts; Hardware; Front and Rear Premium N3 Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 4 In.
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Increased Ground Clearance
- Levels The Front w/The Rear Of The Vehicle
- Give your 64-80 Toyota Land Cruiser an impressive upgrade, front to back with Rough Countrys 4 in. Toyota Suspension Lift System! This easy-to-install lift kit raises the front of your vehicle to be equal height with the rear for a leveled, better-than-stock look that gives an improved ride height and more aggressive appearance. This kit features a set of front leaf springs allowing you gain additional ride height without sacrificing ride quality or performance. A set of rear leaf springs are also provided to keep everything at optimum angles for a factory-like ride, even after lifting. A set of Rough Countrys premium N3 shocks are also included. These fine tuned 10-stage variable high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body. Get the wheels you want! Rough Countrys Rough Countrys 4 in. Toyota Suspension Lift System comes with everything you need to fit up to a 32 in. tire with proper wheel backspacing. Best of all, Rough Countrys Rough Countrys 4 in. Toyota Suspension Lift System is backed by our Lifetime Replacement Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 1965 - Toyota Land Cruiser | L | 3878 | 6 Cyl 3.9L | 4WD | - |
- 0-1 in.; Monotube; 23.82 in. Extended Length; 14.37 Collapsed Length;Rear w/0 - 1 in. Lift
- M1 Shock Absorber; Rear; 0-1 in.; Monotube; 23.82 in. Extended Length; 14.37 Collapsed Length;
- M1 Shock Absorber
- Product Attributes:
- Collapsed Length: 14.370 In.
- Shock Stroke: 9.450 In.
- WARNING CA Proposition 65: No
- Extended Length: 23.820 In.
-
Features:
- 2 in. Seamless Extruded Tube
- 46mm Digressive Piston
- Self-Adjusting Deflective-Disc Independent Rebound And Compression
- 18mm Centerless-Ground/Case-Hardened/Chromed And Super-Polished Rod
- 46mm Monotube Design Ensures Consistent And Fade-Free Performance In All Conditions
- Digressive Valving Instantly Reacts To Changing Surface Conditions
- Zinc Plated For Resistance Against Harsh Elements
- Available In Various Lift Heights For Multiple Applications
- Durable Vulcanized Natural Rubber Bushings
- Free Shipping
- 3 Year Manufacturer Warranty
- Whether youre tackling tough terrain or smooth city streets, Rough Countrys Nitrogen-charged M1 Monotube Shock Absorber leads the way, delivering impeccable ride quality and performance mile after mile. Rough Countrys Monotube M1 Shocks feature an internal floating piston design that keeps the shock oil and high-pressure nitrogen separate. The result is a lightning-fast reaction with no cavitation - just unbridled vibration damping at each and every obstacle. The M1 Monotube Shock Absorber is more than an upgrade - its a true performance shock. Each shock features a steel body that is brushed and galvanized boasting a passivation sealing technology that is sure to withstand the elements. The internal 46mm digressive piston offers countless years of durability. The M1 is designed to be mounted body-up for a more interesting look on the vehicle.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1965 - Toyota Land Cruiser | Rear | 4WD |
- 4-4.5 in.; Monotube; 23.82 in. Extended Length; 14.37 Collapsed Length;Front w/4 - 4.5 in. Lift
- M1 Shock Absorber; Front; 4-4.5 in.; Monotube; 23.82 in. Extended Length; 14.37 Collapsed Length;
- M1 Shock Absorber
- Product Attributes:
- Collapsed Length: 14.370 In.
- Shock Stroke: 9.450 In.
- WARNING CA Proposition 65: No
- Extended Length: 23.820 In.
-
Features:
- 2 in. Seamless Extruded Tube
- 46mm Digressive Piston
- Self-Adjusting Deflective-Disc Independent Rebound And Compression
- 18mm Centerless-Ground/Case-Hardened/Chromed And Super-Polished Rod
- 46mm Monotube Design Ensures Consistent And Fade-Free Performance In All Conditions
- Digressive Valving Instantly Reacts To Changing Surface Conditions
- Zinc Plated For Resistance Against Harsh Elements
- Available In Various Lift Heights For Multiple Applications
- Durable Vulcanized Natural Rubber Bushings
- Free Shipping
- 3 Year Manufacturer Warranty
- Whether youre tackling tough terrain or smooth city streets, Rough Countrys Nitrogen-charged M1 Monotube Shock Absorber leads the way, delivering impeccable ride quality and performance mile after mile. Rough Countrys Monotube M1 Shocks feature an internal floating piston design that keeps the shock oil and high-pressure nitrogen separate. The result is a lightning-fast reaction with no cavitation - just unbridled vibration damping at each and every obstacle. The M1 Monotube Shock Absorber is more than an upgrade - its a true performance shock. Each shock features a steel body that is brushed and galvanized boasting a passivation sealing technology that is sure to withstand the elements. The internal 46mm digressive piston offers countless years of durability. The M1 is designed to be mounted body-up for a more interesting look on the vehicle.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1965 - Toyota Land Cruiser | Front | 4WD |
Showing 1 - 7 of 7 products
Loading...