Shop By Product Matching "Suspension"
Choose a Model for your 1971 Oldsmobile
Image
Product
Price
- Gas Shock
- Recommended OEM Replacement
- Excel-G
- Product Attributes:
- Internal Rebound Spring: N
- Lower Mount Type: E3(46.1x82x0)
- Upper Mount Type: S1
- Compressed Length: 8.66
- Dust Cover Included: N
- Extended Length: 13.58
- Stroke Length: 4.92
- Internal Rebound Bumper: N
- Includes Bump Stop: N
-
Features:
- KYB recommended OEM replacement shock for classic, domestic cars
- The KYB Excel-G helps restore the designed control and handling of your vehicle
- The KYB Excel-G uses a triple lip fluid seal to reduce the chance of oil and gas leaking out
- Vehicle specific, hand assembled in-house damping valves correctly manage tire contact, steering response and body movement
- Made in USA
- Electronic safety systems depend on the suspension, brakes and tires operating as the vehicle manufacturer intended. The KYB Excel-G helps keep Electronic Safety Systems performing as designed.
- KYB has the strongest and thickest strut bodies and brackets in the industry
- minimizing flex to maintain correct alignment in all conditions
- Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
5801, 69600
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 1971 - Oldsmobile Cutlass | Front | Coupe |
- High Pressure Monotube Gas Shock
- Monotube Performance Upgrade
- Gas-a-just
- Product Attributes:
- Internal Rebound Spring: N
- Lower Mount Type: E3(51.6x82x20)
- Upper Mount Type: S1
- Compressed Length: 9.65
- Dust Cover Included: N
- Extended Length: 14.57
- Stroke Length: 4.92
- Internal Rebound Bumper: Y
- Includes Bump Stop: N
-
Features:
- Adds up to 25% more damping performance over original equipment shocks
- Components and valving designed specifically for classic cars
- Gas-a-Just monotubes include additional damping over OE design for vehicles that work, tow, and have larger, heavier tires & wheels
- High pressure monotube design separates the gas and oil for fade free operation and instant response
- Fluid leaking can be a cause of shock failure, the KYB Gas-a-just has an ultra-smooth triple chrome plated chrome piston rod to reduce seal wear
- The higher gas pressure of the KYB Gas-a-Just responds quickly to improve steering response
- Electronic safety systems depend on the suspension, brakes and tires operating as the vehicle manufacturer intended. The KYB Gas-a-just helps keep Electronic Safety Systems performing as designed.
- The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
5906, 69675
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Oldsmobile 98 | Front |
- High Pressure Monotube Gas Shock for Cars and Trucks
- Monotube Performance Upgrade
- Gas-a-just
- Product Attributes:
- Internal Rebound Spring: N
- Lower Mount Type: E3(46.6x82x20)
- Upper Mount Type: S1
- Compressed Length: 8.58
- Dust Cover Included: N
- Extended Length: 13.03
- Stroke Length: 4.45
- Internal Rebound Bumper: N
- Includes Bump Stop: N
-
Features:
- Adds up to 25% more damping performance over original equipment shocks
- Components and valving designed specifically for classic cars
- Gas-a-Just monotubes include additional damping over OE design for vehicles that work, tow, and have larger, heavier tires & wheels
- High pressure monotube design separates the gas and oil for fade free operation and instant response
- Fluid leaking can be a cause of shock failure, the KYB Gas-a-just has an ultra-smooth triple chrome plated chrome piston rod to reduce seal wear
- The higher gas pressure of the KYB Gas-a-Just responds quickly to improve steering response
- Electronic safety systems depend on the suspension, brakes and tires operating as the vehicle manufacturer intended. The KYB Gas-a-just helps keep Electronic Safety Systems performing as designed.
- The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
5840, 69600
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 1971 - Oldsmobile Cutlass | Front | Coupe |
- High Pressure Monotube Gas Shock
- Monotube Performance Upgrade
- Gas-a-just
- Product Attributes:
- Internal Rebound Spring: N
- Lower Mount Type: E1
- Upper Mount Type: E3(61.6x87x20)
- Compressed Length: 13.54
- Dust Cover Included: Y
- Extended Length: 21.89
- Stroke Length: 8.74
- Internal Rebound Bumper: N
- Includes Bump Stop: N
-
Features:
- Adds up to 25% more damping performance over original equipment shocks
- Components and valving designed specifically for classic cars
- Gas-a-Just monotubes include additional damping over OE design for vehicles that work, tow, and have larger, heavier tires & wheels
- High pressure monotube design separates the gas and oil for fade free operation and instant response
- Fluid leaking can be a cause of shock failure, the KYB Gas-a-just has an ultra-smooth triple chrome plated chrome piston rod to reduce seal wear
- The higher gas pressure of the KYB Gas-a-Just responds quickly to improve steering response
- Electronic safety systems depend on the suspension, brakes and tires operating as the vehicle manufacturer intended. The KYB Gas-a-just helps keep Electronic Safety Systems performing as designed.
- The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
550013, 69724
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Oldsmobile 98 | Rear |
- Front Upper Suspension Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K5208 Front Upper Suspension Ball Joint for Chevrolet S10
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 4
- Mounting Type: Bolt-on
- Greaseable: Yes
- Material: Neoprene
-
Features:
- DESIGN CHANGE – New and improved follower ball joint design to extend product life and simplify installation
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02-82008, 02-86021, 0282008E, 10233, 10268, 104231, 1268K, 14039014, 260-1091, 2601091, 2601091FT, 282008, 286021, 305135, 31026, 325831, 335877, 335878...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Oldsmobile 98 | Front Upper |
- Front Upper Suspension Ball Joint
- MOOG K5208 Front Upper Suspension Ball Joint for Chevrolet S10
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 4
- Mounting Type: Bolt-on
- Greaseable: Yes
- Material: Neoprene
-
Features:
- DESIGN CHANGE – New and improved follower ball joint design to extend product life and simplify installation
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Oldsmobile 98 | Front Upper |
- Front Upper Suspension Control Arm Bushing Kit
- Kit Contains FRONT AND REAR BUSHING
- MOOG K5196 Front Upper Suspension Control Arm Bushing Kit for Chevrolet Camaro
- Product Attributes:
- Inside Diameter: 0.670
- Mounting Hardware Included: No
- Dust Boot Included: No
- Bushing Quantity: 2
- Mounting Type: Press In
- Material: Steel Clad Rubber
- Part Description: Suspension Control Arm Bushing Kit
-
Features:
- HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS -- Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN -- Engineered to match or exceed OE requirements
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
04-82008, 11003, 12162, 2162B, 267-1162, 267-1471, 3711826, 401267, 45G8002, 46G8002A, 482008, 531-255, 532-869, 560-1002, 560-1002B, 807-12162, A2-022, A2-205...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Oldsmobile Cutlass | Front Upper |
- Air Shock Single Fill Kit
This Part Fits the Following OEM/Substitute Numbers:
6L5Z18125ACA, 8L5Z18125AB, 8L5Z18125AJ, 8L5Z18125AK, AL5Z18125A, AL5Z18125AB, AL5Z18125AG, AL5Z18125AK, XW7Z18125BA
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Oldsmobile Toronado | Rear |
- Front Upper Suspension Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K5108 Front Upper Suspension Ball Joint for Chevrolet Camaro
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 4
- Mounting Type: Bolt-on
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- DESIGN CHANGE – New and improved follower ball joint design to extend product life and simplify installation
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02-82011, 0282011E, 10195, 10196, 1195K, 260-1064, 282011, 31075, 383929, 3848048, 3877058, 3963842, 3963843, 3963844, 45D0009, 46D0009A, 500-1009, 500-1009B...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Oldsmobile Vista Cruiser | Front Upper |
- Monro-Matic Plus Shock Absorber
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12322219, 1440005, 22003121, 22003254, 22046423, 22046424, 22046426, 22046427, 22046428, 22046445, 22046455, 22046456, 22046498, 22063940, 22063941, 22064006, 22064007, 22064040...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Oldsmobile Custom Cruiser | Front |
Showing 1 - 10 of 86 products
Loading...