Shop By Product Matching "Suspension"
Choose a Model for your 2011 Chevrolet
Avalanche
Aveo
Aveo5
Camaro
Caprice
Captiva Sport
Cheyenne
Colorado
Corvette
Cruze
Equinox
Express 1500
Express 2500
Express 3500
Express Cargo
Express Pasajeros
HHR
Impala
Malibu
Silverado
Silverado 1500
Silverado 2500 HD
Silverado 3500 HD
Silverado HD
Suburban 1500
Suburban 2500
Tahoe
Traverse
Volt
Image
Product
Price
- Jounce Bumper and Bellows
- Boot Kits
-
Features:
- Superior quality boot helps protect the strut shaft from leak-causing dirt and debris
- Poly foam bumper prevents the strut from bottoming out
- Built with design and quality that matches or exceeds OE
- Protects the upper seal and bushing
- KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
143057, 63619
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Chevrolet Malibu | Front |
- Jounce Bumper and Bellows
- Boot Kits
-
Features:
- Superior quality boot helps protect the strut shaft from leak-causing dirt and debris
- Poly foam bumper prevents the strut from bottoming out
- Built with design and quality that matches or exceeds OE
- Protects the upper seal and bushing
- KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
143059, 63620
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Chevrolet Camaro | Front |
- Suspension Stabilizer Bar
- 33 mm Diameter
- Product Attributes:
- Grade Type: Regular
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Bushing Color:
- Black
- Negro
- Noir
- Mounting Hole Diameter: 16
- End 1 Type:
- Bolt On
- Con Perno
- Bushings Included:
- Oui
- Sí
- Yes
- Finish:
- Powder Coat
- Recubrimiento En Polvo
- End 2 Type:
- Bolt On
- Con Perno
- Adjustable:
- No
- Non
- Suspension Grade Type:
- Reemplazo Estándar
- Standard
- Contenidos del paquete: Barra Estabilizadora, Soportes, Artículos De Ferretería Y Conexiones Del Extremo De La Barra Estabilizadora
- Material:
- Acero
- Steel
-
Features:
- Improved design - this suspension stabilizer bar has been redesigned for greater durability than the failure-prone original equipment part
- Upgraded materials - this stabilizer bar is made from solid forged steel to resist failure caused by weakness in the original part's hollow tube construction
- Compete solution - new bushings and installation hardware are included with the stabilizer bar for a complete repair
- Quality tested - this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
- The original equipment tubular steel stabilizer bar on specific vehicles fails when moisture and road salt cause corrosion at the bushings. This Dorman OE FIX stabilizer bar is made from solid forged steel for exceptional strength and durability.
This Part Fits the Following OEM/Substitute Numbers:
10257316, 10257317, 10284146, 10287717, 10287944, 10404184, 10413385, 25861193, 25861194, 25861195, 25861196, 927-100, K170001, MS508197, SK927100
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Chevrolet Impala | Front |
- High Pressure Monotube Gas Shock
- Maximum Monotube Performance Upgrade (Excludes Z55 Autoride Suspension and Quadrasteer)
- MonoMax
- Product Attributes:
- Internal Rebound Spring: N
- Lower Mount Type: E2(14.6x34)
- Upper Mount Type: S1
- Compressed Length: 11.06
- Dust Cover Included: Y
- Extended Length: 15.59
- Stroke Length: 4.53
- Internal Rebound Bumper: Y
- Includes Bump Stop: N
-
Features:
- Maximum performance upgrade with up to 40% more damping performance than standard shock absorbers
- Perfect solution when you need to upgrade suspension performance on your GM truck
- Truck monotube design outperforms all other standard shock absorbers
- Zinc-coated, stainless steel piston ring provides a positive seal in the most extreme conditions
- Rubber boot to protect the shaft and keep dirt and debris away from the seals
- Engineered to help vehicles with electronic safety systems (ESC, ABS, etc.)
- Tough conditions demand tough truck shocks. The large bore KYB MonoMax provides the additional stability that heavier, more powerful or high center of gravity vehicles demand. The KYB MonoMax is a heavy duty monotube shock absorber that provides the most handling, control and durability of any KYB shock; and its just for trucks. The MonoMaxs tough design automatically adjusts to driving conditions with fade-free performance. The KYB MonoMax has an outstanding reputation for vehicles that do real work, go off-road, tow a trailer or haul heavy loads. It uses a work-ready, zinc-coated steel piston ring and includes an off-road dust boot.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15753519, 19152878, 22064863, 22064864, 77817, 911501
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2011 - Chevrolet Suburban 2500 | Front | 4WD |
- Front Lower Suspension Ball Joint
- 4.04 (in) Length Aluminum Arm without Aluminum Steering Knuckles
- MOOG K500007 Front Lower Suspension Ball Joint for Chevrolet Silverado 1500
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Chevrolet Tahoe | Front Lower |
- Front Lower Suspension Ball Joint
- 4.04 (in) Length Aluminum Arm Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces New Pre-Installed Integral Dust Boot Allows For Ease Of Installation without Aluminum Steering Knuckles
- MOOG K500007 Front Lower Suspension Ball Joint for Chevrolet Silverado 1500
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1014457, 10355407, 10355408, 104500007, 10480963, 15245581, 15922557, 1601685, 19209396, 19256481, 25788110, 25788111, 25997507, 25997508, 25997509, 25997510, 260-1685, 2601685...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Chevrolet Tahoe | Front Lower |
- Front Lower Suspension Ball Joint
- Aluminum Arm without Aluminum Steering Knuckles
- MOOG K500007 Front Lower Suspension Ball Joint for Chevrolet Silverado 1500
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Chevrolet Suburban 2500 | Front Lower |
- Front Lower Suspension Ball Joint
- Aluminum Arm Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces New Pre-Installed Integral Dust Boot Allows For Ease Of Installation without Aluminum Steering Knuckles
- MOOG K500007 Front Lower Suspension Ball Joint for Chevrolet Silverado 1500
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Chevrolet Suburban 2500 | Front Lower |
- Jounce Bumper and Bellows
- Boot Kits
-
Features:
- Superior quality boot helps protect the strut shaft from leak-causing dirt and debris
- Poly foam bumper prevents the strut from bottoming out
- Built with design and quality that matches or exceeds OE
- Protects the upper seal and bushing
- KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
143058, 63618
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Chevrolet Equinox | Front |
- Jounce Bumper and Bellows
- Boot Kits
-
Features:
- Superior quality boot helps protect the strut shaft from leak-causing dirt and debris
- Poly foam bumper prevents the strut from bottoming out
- Built with design and quality that matches or exceeds OE
- Protects the upper seal and bushing
- KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
143064, 63629
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Chevrolet Camaro | Rear |
Showing 1 - 10 of 2216 products
Loading...