Shop By Product Matching "Suspension"
Choose a Model for your 2021 Ram
Image
Product
Price
- B8 6112 - Suspension Kit
- Front Lift Height: 0-2.6" including factory Off-Road Package Without Air Suspension
- Front Suspension Kit
- B8 6112
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Boot Included: No
- Internal Design: Monotube
- Reservoir: No
- Body Design: Snap Ring Grooved Body (coilover)
- Body Diameter (ID): 60mm
- Spring Seat Included: Yes
- Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Front Spring | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|---|
| 2021 - Ram 1500 | V | - | Front | Coil | 8 Cyl 5.7L | Longhorn | 4WD | 345 |
- B8 6112 - Suspension Kit
- Front Lift Height: 0.6-2.6" including factory Off-Road Package Without Air Suspension
- Front Suspension Kit
- B8 6112
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Boot Included: No
- Internal Design: Monotube
- Reservoir: No
- Body Design: Snap Ring Grooved Body (coilover)
- Body Diameter (ID): 60mm
- Spring Seat Included: Yes
- Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Front Spring | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|---|
| 2021 - Ram 1500 | V | - | Front | Coil | 8 Cyl 5.7L | Longhorn | RWD | 345 |
- B8 6112 - Suspension Kit
- Front Lift Height: 0-2" Without Air Suspension
- Front Suspension Kit
- B8 6112
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Boot Included: No
- Internal Design: Monotube
- Reservoir: No
- Body Design: Snap Ring Grooved Body (coilover)
- Body Diameter (ID): 60mm
- Spring Seat Included: Yes
- Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Front Spring | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2021 - Ram 1500 | V | - | Front | Coil | 8 Cyl 5.7L | Rebel | 345 |
- 2" Adventure Series Leveling Kit
- Does not fit factory air-ride equipped models. Does not fit TRX models. Requires strut disassembly. Will NOT fit 2019-2021 RAM 1500 Classic models, Refer to the 2018 kit listings.
- Level out your RAM 1500 the right way with Zone Offroad. In addition to these steel fabricated top mounted strut spacers designed for 2" of lift, these kits address the limitations of the factory upper ball joint (maxed out with a leveling kit installed which will lead to premature wear) by upgrading to adventure series upper control arms (UCAs). These fully boxed and welded UCAs offer superior strength and performance and use an indexed ball joint cup designed for more droop travel. Parts come fully assembled and ready to install right out of the box to allow clearance for 33" tires.
- In the box: Strut Spacer - Front Upper Control Arms
- Product Attributes:
- Max Tire Size 2: 33 X 12.5
- Lift Type: Leveling Kit
- Front Lift Method: Strut Spacers
- Wheel Size 2: 18 X 9
- Accommodates Factory Wheels: No
- Rear Lift Height: -
- Wheel Size: 20 X 9
- Back Spacing 2: 5"
- Back Spacing: 5"
- Front Lift Height: 2"
-
Features:
- Combination top spacer and preload spacer to not overextend suspension
- Adventure series UCalifornia correct ball joint angle and improve travel
- Retains factory ride quality and functionality
- Levels stance and allows clearance for 33" tires
- Easy to follow instructions
- Includes Factory Protection Plus
- Shop Zone Leveling Kits for Truck and Jeep! Get a level appearance plus additional clearance with a Zone Offroad Leveling Kit for Chevy / GMC, Ford, RAM, Dodge, Toyota, and Nissan trucks as well as Jeeps. Leveling Kits are available in 1" to 2.5" heights depending on the application. Zone Offroad's research and development team designs affordable, bolt-on solutions for each truck to ensure proper fitment including coil spring spacers, strut spacers, and torsion key kits -- all the way up to our control arm leveling kits for GM and RAM applications. All Zone Offroad Leveling Kits are made in the USA and powder-coated. 1 Inch to 2.5 Inch Front Lift Heights | Affordable Leveling Solution | Smooth, factory-like ride quality | Easy to Install - Bolt On | Designed to not damage the vehicle
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Ram Rebel |
- Weight Capacity 8600 lbs.
- Suspension Enhancement System; Weight Capacity 8600 lbs.; Rear;
- Suspension Enhancement System
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Used To Carry Heavy Cargo Or Towing Trailers
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ram 2500 | Rear | Laramie |
- Weight Capacity 7000 lbs.; Severe Service-Slide-In Camper Or Salt Spreader
- Suspension Enhancement System; Weight Capacity 7000 lbs.; Rear; Severe Service-Slide-In Camper Or Salt Spreader;
- Suspension Enhancement System
- Product Attributes:
- Usage:
- Heavy Duty Truck
- Medium Duty Truck
- Axle Style: N/a
- Usage:
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Used To Carry Heavy Cargo Or Towing Trailers
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ram 1500 | Rear | Laramie |
- Weight Capacity 8600 lbs.
- Suspension Enhancement System; Weight Capacity 8600 lbs.; Rear;
- Suspension Enhancement System
- Product Attributes:
- Usage:
- Heavy Duty Truck
- Medium Duty Truck
- Axle Style: N/a
- Usage:
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Leader In The Snow Plow Industry
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ram 3500 | Rear | SLT |
- Weight Capacity 8600 lbs. For Vehicles With Out Air Suspension
- Suspension Enhancement System; Weight Capacity 8600 lbs.; Rear;
- Suspension Enhancement System
- Product Attributes:
- Usage:
- Heavy Duty Truck
- Medium Duty Truck
- Axle Style: N/a
- Usage:
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Used To Carry Heavy Cargo Or Towing Trailers
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2021 - Ram 1500 | Rear | Tradesman | RWD |
- Weight Capacity 8600 lbs.
- Suspension Enhancement System; Weight Capacity 8600 lbs.; Rear;
- Suspension Enhancement System
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Used To Carry Heavy Cargo Or Towing Trailers
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ram 2500 | Rear | Laramie |
- Stabilizer Bar Bushing Kit
- Standard Design
- MOOG K7383 Stabilizer Bar Bushing Kit
- Product Attributes:
- Includes Dust Boots: No
- Quantity of Bushings: 2
- Bar Diameter (Inch): 1.320
- Includes Hardware: No
- Inner Diameter (Inch): 1.320
- Length (Inch): 2.000
- Meets/Exceeds OE Manufacturer Specs: Exceeds
- Part Description: Sway Bar Bushing
- Outer Diameter (Inch): 1.870
-
Features:
- PREMIUM MATERIALS -- Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE -- Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
265-2361, 45G0886, 52013793AA, 52106092AA, 52106897AA, 52106898AA, 52110060AA, 52110060AB, 52113196AA, 52121939AA, 52855534AA, 53366781A, 535-945, 550-1286, 55366781AA, 55398036AA, 55398037AA, 602.67020...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2021 - Ram 1500 | V | 3604 | Front To Frame | 6 Cyl 3.6L | Rebel | 220 |
Showing 1 - 10 of 730 products
Loading...