Image
Product
Price
- Autolite XP24 Iridium XP Spark Plug
- Gap .035 (in)
- Iridium XP Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Tapered
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.597
- 15.16
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.431
- 10.95
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.274
- 57.76
-
Features:
- Engineered with an Iridium-enhanced center electrode and fine-wire design that increases ignitability and provides a more focused ignition for improved engine performance.
- Its proprietary platinum ground electrode provides increased durability* and resistance to wear, extending the life of the plug.
- The tapered ground wire improves engine ignitability.
- Its high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength while preventing flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Includes a lifetime limited warranty that guarantees optimum performance equal to OE designed plugs.
- Autolite® Iridium XP spark plugs are engineered with an iridium-enhanced fine-wire and a proprietary, platinum ground electrode, to increase durability*, while its tapered ground wire maximizes engine efficiency, delivering improved engine performance, fuel efficiency, acceleration, and ignitability.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
4716, 7177, ITF20, ITF20TT, UR5IX
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Chevrolet Vega | L | 2294 | 4 Cyl 2.3L | 140 |
- 160 deg.; Race Only
- High Performance Thermostat; 160 deg.; Race Only;
- High Performance Thermostat
- Product Attributes:
- Temperature: 160° F
- WARNING CA Proposition 65: Yes
- Diameter (in.): 2.120 In.
-
Features:
- High Performance
- Resists Variations In Coolant
- Brass and Copper Construction
- Opens At Right Temperature
- Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Additional Fitment Information:
| Vehicle |
|---|
| 1975 - Chevrolet K20 |
- Weight Capacity 8000 lbs.; Severe Service-Slide-In Camper Or Salt Spreader
- Suspension Enhancement System; Weight Capacity 8000 lbs.; Rear; Severe Service-Slide-In Camper Or Salt Spreader;
- Suspension Enhancement System
- Product Attributes:
- Usage:
- Heavy Duty Truck
- Medium Duty Truck
- Axle Style: N/a
- Usage:
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Used To Carry Heavy Cargo Or Towing Trailers
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position | Bed Length |
|---|---|---|
| 1975 - Chevrolet C30 | Rear | 96.0 |
- Weight Capacity 8000 lbs.; Severe Service-Slide-In Camper Or Salt Spreader
- Suspension Enhancement System; Weight Capacity 8000 lbs.; Rear; Severe Service-Slide-In Camper Or Salt Spreader;
- Suspension Enhancement System
- Product Attributes:
- Usage:
- Heavy Duty Truck
- Medium Duty Truck
- Axle Style: N/a
- Usage:
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Used To Carry Heavy Cargo Or Towing Trailers
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1975 - Chevrolet K20 | Rear |
- Weight Capacity 8000 lbs.; Severe Service-Slide-In Camper Or Salt Spreader
- Suspension Enhancement System; Weight Capacity 8000 lbs.; Rear; Severe Service-Slide-In Camper Or Salt Spreader;
- Suspension Enhancement System
- Product Attributes:
- Usage:
- Heavy Duty Truck
- Medium Duty Truck
- Axle Style: N/a
- Usage:
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Used To Carry Heavy Cargo Or Towing Trailers
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1975 - Chevrolet K20 | Rear |
- Weight Capacity 8000 lbs.; Severe Service-Slide-In Camper Or Salt Spreader
- Suspension Enhancement System; Weight Capacity 8000 lbs.; Rear; Severe Service-Slide-In Camper Or Salt Spreader;
- Suspension Enhancement System
- Product Attributes:
- Usage:
- Heavy Duty Truck
- Medium Duty Truck
- Axle Style: N/a
- Usage:
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Used To Carry Heavy Cargo Or Towing Trailers
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1975 - Chevrolet C20 | Rear |
- For Positive Seal Use Teflon Tape Or Pro Pipe Sealant
- Brass Freeze Plug Kit; For Positive Seal Use Teflon Tape Or Pro Pipe Sealant;
- Brass Freeze Plug Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Item Weight: 0.880 Lbs.
-
Features:
- Eliminates Rusted Plugs
- Designed For Marine Use
- Ideal For Every Day Use
- Ideal For Long-Term Storage
- Includes All Plugs
- Eliminate any chance of rusted out freeze plugs with a Mr. Gasket Brass Freeze Plug Kit. Though designed for marine applications, kits are for long-term stored vehicles as well as every day street use. Kit includes all plugs needed for a complete engine. Fits Chevrolet small block .
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Chevrolet Impala | V | - | 8 Cyl 5.7L | 350 |
- For Positive Seal Use Teflon Tape Or Pro Pipe Sealant
- Brass Freeze Plug Kit; For Positive Seal Use Teflon Tape Or Pro Pipe Sealant;
- Brass Freeze Plug Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Item Weight: 0.880 Lbs.
-
Features:
- Eliminates Rusted Plugs
- Designed For Marine Use
- Ideal For Every Day Use
- Ideal For Long-Term Storage
- Includes All Plugs
- Eliminate any chance of rusted out freeze plugs with a Mr. Gasket Brass Freeze Plug Kit. Though designed for marine applications, kits are for long-term stored vehicles as well as every day street use. Kit includes all plugs needed for a complete engine. Fits Chevrolet small block .
Additional Fitment Information:
| Vehicle |
|---|
| 1975 - Chevrolet Corvette |
- Hex Head; Short Water Pump; 4 piece 3/8 in. w/Washers
- Water Pump Bolts; Hex Head; Short Water Pump; 4 piece 3/8 in. w/Washers;
- Water Pump Bolts
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Engine Make/Size: Chevy Small Block (262-400)
-
Features:
- Chrome Plated
- 12-Point Head
- This Mr. Gasket Water Pump Bolt Set includes chrome plated grade 5 hex head fasteners and AN style washers to install the water pump on your small block Chevrolet with the short style water pump. AN washers have no exposed shoulder which offers a professional appearance. Includes one 3/8 inch-16 x 2-1/2 bolt, three 3/8 inch-16 x 1-3/4 inch bolts, and four 3/8 inch AN washers.
Additional Fitment Information:
| Vehicle |
|---|
| 1975 - Chevrolet Corvette |
- Hex Head; Short Water Pump; 4 piece 3/8 in. w/Washers
- Water Pump Bolts; Hex Head; Short Water Pump; 4 piece 3/8 in. w/Washers;
- Water Pump Bolts
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Engine Make/Size: Chevy Small Block (262-400)
-
Features:
- Chrome Plated
- 12-Point Head
- This Mr. Gasket Water Pump Bolt Set includes chrome plated grade 5 hex head fasteners and AN style washers to install the water pump on your small block Chevrolet with the short style water pump. AN washers have no exposed shoulder which offers a professional appearance. Includes one 3/8 inch-16 x 2-1/2 bolt, three 3/8 inch-16 x 1-3/4 inch bolts, and four 3/8 inch AN washers.
Additional Fitment Information:
| Vehicle |
|---|
| 1975 - Chevrolet Corvette |
Showing 1 - 10 of 39 products
Loading...