Image
Product
Price
- Autolite AI5684 Iridium Ultra Spark Plug
- Iridium Ultra Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.15
- 3.81
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.672
- 17.07
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 14
- Reach:
- 1.043
- 26.49
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.012
- 51.1
-
Features:
- Engineered with an iridium-enhanced laser-welded fine-wire center electrode that provides focused ignition, optimal ignitability, and maximum performance.
- Its proprietary platinum ground electrode provides increased durability and resistance to wear, extending the life of the plug.
- The tapered ground wire enhances ignitability for improved combustion and performance.
- The high alumina ceramic multi-rib insulator insulator provides thermal conductivity and superior insulation for increased strength & prevents flash-over.
- The copper core within the plug provides reliable performance with higher thermal conductivity.
- Autolite® Iridium Ultra® is equipped with a laser welded iridium enhanced fine-wire center electrode that ensures your engine runs at maximum performance; while its double precious metal design provides increased durability, allowing your engine to maintain desired performance levels for longer. Iridium Ultra delivers optimal fuel efficiency, acceleration, and ignitability, making it the best OE replacement plug choice for modern engines.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12568387, 22401-6CA1C, 22401-6LD1C, 3439, DILKAR6A11, FXE20HR11, IXEH20ETT, IXEH20TT, REA12WMB4, VR8NII35U
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2024 - Nissan Sentra | L | 1997 | GAS | 4 Cyl 2.0L | S | Naturally Aspirated | - |
- Autolite AI5684 Iridium Ultra Spark Plug
- Iridium Ultra Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.15
- 3.81
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.672
- 17.07
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 14
- Reach:
- 1.043
- 26.49
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.012
- 51.1
-
Features:
- Engineered with an iridium-enhanced laser-welded fine-wire center electrode that provides focused ignition, optimal ignitability, and maximum performance.
- Its proprietary platinum ground electrode provides increased durability and resistance to wear, extending the life of the plug.
- The tapered ground wire enhances ignitability for improved combustion and performance.
- The high alumina ceramic multi-rib insulator insulator provides thermal conductivity and superior insulation for increased strength & prevents flash-over.
- The copper core within the plug provides reliable performance with higher thermal conductivity.
- Autolite® Iridium Ultra® is equipped with a laser welded iridium enhanced fine-wire center electrode that ensures your engine runs at maximum performance; while its double precious metal design provides increased durability, allowing your engine to maintain desired performance levels for longer. Iridium Ultra delivers optimal fuel efficiency, acceleration, and ignitability, making it the best OE replacement plug choice for modern engines.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2024 - Nissan Altima | L | 2488 | PR25DD | GAS | 4 Cyl 2.5L | Platinum | 152 |
- Autolite XP5682 Iridium XP Spark Plug
- Gap .032 (in)
- Iridium XP Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.15
- 3.81
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Core Nose Length:
- 0.357
- 9.07
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Indexed: No
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 14
- Reach:
- 1.043
- 26.49
- Center Electrode Tip Material: Iridium
- Manufacturer Heat Range: 11
- Resistance: 4000
- Insulator Height:
- 2.012
- 51.1
-
Features:
- Engineered with an Iridium-enhanced center electrode and fine-wire design that increases ignitability and provides a more focused ignition for improved engine performance.
- Its proprietary platinum ground electrode provides increased durability* and resistance to wear, extending the life of the plug.
- The tapered ground wire improves engine ignitability.
- Its high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength while preventing flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Includes a lifetime limited warranty that guarantees optimum performance equal to OE designed plugs.
- Autolite® Iridium XP spark plugs are engineered with an iridium-enhanced fine-wire and a proprietary, platinum ground electrode, to increase durability*, while its tapered ground wire maximizes engine efficiency, delivering improved engine performance, fuel efficiency, acceleration, and ignitability.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
004 159 39 03, 12290-59B-003, 12290-5A2-A01, 12290-5A2-A02, 12290-5K0-A01, 12290-5PA-A01, 12290-5R0-003, 12290-5R0-004, 12290-RDF-A01, 22401 AA830, 22401-JF01D, 22401-JK01D, 3457, 6043, 6711, 6812 2874AA, 96310, 96318...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2024 - Nissan GT-R | V | 3799 | 6 Cyl 3.8L | - |
- Autolite AI5682 Iridium Ultra Spark Plug
- Gap .032 (in)
- Iridium Ultra Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.15
- 3.81
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Core Nose Length:
- 0.357
- 9.07
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Indexed: No
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 14
- Reach:
- 1.043
- 26.49
- Center Electrode Tip Material: Iridium
- Manufacturer Heat Range: 11
- Resistance: 4000
- Insulator Height:
- 2.012
- 51.1
-
Features:
- Engineered with an iridium-enhanced laser-welded fine-wire center electrode that provides focused ignition, optimal ignitability, and maximum performance.
- Its proprietary platinum ground electrode provides increased durability and resistance to wear, extending the life of the plug.
- The tapered ground wire enhances ignitability for improved combustion and performance.
- The high alumina ceramic multi-rib insulator insulator provides thermal conductivity and superior insulation for increased strength & prevents flash-over.
- The copper core within the plug provides reliable performance with higher thermal conductivity.
- Autolite® Iridium Ultra® is equipped with a laser welded iridium enhanced fine-wire center electrode that ensures your engine runs at maximum performance; while its double precious metal design provides increased durability, allowing your engine to maintain desired performance levels for longer. Iridium Ultra delivers optimal fuel efficiency, acceleration, and ignitability, making it the best OE replacement plug choice for modern engines.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
004 159 39 03, 12290-59B-003, 12290-5A2-A01, 12290-5K0-A01, 12290-5PA-A01, 12290-5R0-003, 12290-5R0-004, 12290-6A0-A01, 12290-RDF-A01, 22401 AA830, 22401-JF01D, 22401-JK01D, 3457, 6043, 6711, 96310, DILKAR7B8, DILKAR7C11S...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2024 - Nissan GT-R | V | 3799 | 6 Cyl 3.8L | - |
- NGK Laser Iridium High Ignitability Spark Plug
- Gap 0.044" OE Equivalent Design; OE Spark Plug Is High Ignitability. For Optimal Performance, Replace With High Ignitability Spark Plugs. 105,000 mi Factory Recommended Service Interval
- Laser Iridium High Ignitability Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.16
- 4.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Service Number: Dilkar7b11
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Dilkar7b11
- Resistor Type: Yes
- Stock Number: 1406
- Ground Electrode Tip Design: Dual Fine Electrode (dfe) - High Ignitability
- Pre-Gap Size:
- .044
- 1.1
- Ground Electrode Core Material: Nickel
- Material Grade: Iridium Platinum
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 14mm
- Reach:
- 1.043
- 26.5
- Center Electrode Tip Material: Iridium
- Skirt Length: 0.0
- Manufacturer Heat Range: 7
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.01
- 51.0
- Thread Diameter:
- 0.472
- 12.0
-
Features:
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium's density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- RECOMMENDED USAGE: Best for vehicles with OE DFE iridium alloy plugs
- DFE DESIGN: Double fine electrode (platinum pin) provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
- ACTUAL OE or EQUIVALENT HIGH IGNITABILITY DESIGN: DFE tip and iridium alloy center electrode produce the most advanced OE spark plug technology
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- NGK Laser Iridium High Ignitability spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium High Ignitability spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Laser Iridium High Ignitability spark plugs feature raised platinum pad or platinum fine wire tip on the ground electrode for even wear in distributorless ignition systems and improved spark performance.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
1406, 22401 EZ37C, 22401-1LA1C, 22401-1LA7C, 3442, 4712, 9693, FXE22HR11, IXEH22TT
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2024 - Nissan Frontier | V | 3779 | 6 Cyl 3.8L | - |
- NGK Laser Iridium High Ignitability Spark Plug
- Gap 0.044" Actual OE Manufacturer; OE Spark Plug Is High Ignitability. For Optimal Performance, Replace With High Ignitability Spark Plugs. 105,000 mi Factory Recommended Service Interval
- Laser Iridium High Ignitability Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.16
- 4.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Service Number: Dilkar7b11
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Dilkar7b11
- Resistor Type: Yes
- Stock Number: 1406
- Ground Electrode Tip Design: Dual Fine Electrode (dfe) - High Ignitability
- Pre-Gap Size:
- .044
- 1.1
- Ground Electrode Core Material: Nickel
- Material Grade: Iridium Platinum
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 14mm
- Reach:
- 1.043
- 26.5
- Center Electrode Tip Material: Iridium
- Skirt Length: 0.0
- Manufacturer Heat Range: 7
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.01
- 51.0
- Thread Diameter:
- 0.472
- 12.0
-
Features:
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium's density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- RECOMMENDED USAGE: Best for vehicles with OE DFE iridium alloy plugs
- DFE DESIGN: Double fine electrode (platinum pin) provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
- ACTUAL OE or EQUIVALENT HIGH IGNITABILITY DESIGN: DFE tip and iridium alloy center electrode produce the most advanced OE spark plug technology
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- NGK Laser Iridium High Ignitability spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium High Ignitability spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Laser Iridium High Ignitability spark plugs feature raised platinum pad or platinum fine wire tip on the ground electrode for even wear in distributorless ignition systems and improved spark performance.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2024 - Nissan Titan XD | V | 5552 | 8 Cyl 5.6L | - |
- 2nd Seat Floor Liner
- X-act Contour - 2nd Seat Floor Liner
- Product Attributes:
- CA Prop 65 Type: Cancer And Reproductive
- Location: Second Row
- CA Prop 65: Y
- Category: X-act Contour Series
- Requires Drilling: No
-
Features:
- Thinner plastic floor mats warp and curl over time. X-act Contour® is engineered to stay true to the shape of your floorboards for life. It's strong yet pliable material is easy to remove and clean no matter what comes down.
- Our FormFit Design™ process perfectly forms each liner to the detailed contours of your specific ride. How? Well… our Nerds use lasers and computers to precisely measure each individual make and model’s floorboard to create the perfect fit.
- With the perfect balance of strength and softness, our rubberized DuraGrip™ material delivers no-slip, no-slide, driving confidence no matter what the road brings.
- Our patented FormFit Edge™ features a raised ridge that runs along the door jam, protecting your truck, van, or SUV from all manner of muck.
- Over vinyl or carpet, our StayPut™ Cleats firmly lock to your factory anchors. It's rock-steady stability underfoot, only by Husky.
- When we say it’s “guaranteed for life” that is exactly what we mean. No hassles, no guff. If you have a problem with this or any Husky product, we’ll replace it.
- Folds and molds for easy installation, removal and cleanup. Just yank it out, spray it down, and carry on.
- Proudly made in the USA.
- Line your floorboards with laser-fit toughness. X-Act Contour® mats are super-rugged wherever adventure takes you, soft and pliable where it counts. Our no-slip rubberized DuraGrip™ material stands up to whatever you're laying down with legendary Husky durability---guaranteed for life.
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 2024 - Nissan Sentra | Rear | United States |
- XRS Cross Bars - Bed Rail Kit for Full/Mid Sized Trucks W/Tonneau Cover T-Tracks
- Works with T-slotted tonneau covers only (see list in image carousel at left)
- Product Attributes:
- Mounting Hardware Included: Yes
- Category: Bed Accessories
-
Features:
- 6" tall steel corner uprights provide clearance for unobstructed use of truck bed
- Two 4-CORE aluminum cross rails offer unlimited accessory mounting options for gear and trail tools
- Fits most full-sized and Mid-sized truck beds
- Holds 600 lbs. static or 300 lbs. dynamic maximum weight, evenly distributed*
- Compatible with Go Rhino’s SRM400, SRM500 and SRM600 Roof Racks
- Compatible with most Go Rhino 4-Core accessories
- Optional Side Rail Accessory Kits available (sold separately)
- *Always check Vehicle Owner’s Manual for each vehicle’s weight recommendation
- Attaches to Tonneau covers with T-slots. Excluding roll up tonneau cover
- Limited Lifetime warranty on materials and construction and a 5 year warranty on the Textured Black Finish.
- Go Rhino’s XRS Cross Bars allow you to mount a rooftop tent on your truck while preserving the utility and capacity of your factory truck bed. The corner uprights elevate and support the 4-CORE cross bars approximately six inches above the factory bed cap, which provides for unobstructed access to the truck bed. Mounted tents and cargo boxes will sit below the roof of the cab, which reduce wind resistance. Each 4-CORE cross bar works with standard ¼-20 hex head bolts which allows unlimited mounting options for gear, trail tools and all your toys. Installation is easy with no drilling however cutting is required on midsize trucks. XRS Cross Bars come with a Limited Lifetime warranty on materials and construction and a 5 year warranty on the Textured Black Finish.
Additional Fitment Information:
| Vehicle | Doors | Region | Body |
|---|---|---|---|
| 2024 - Nissan Frontier | 4 | United States | Extended Cab Pickup |
Showing 1 - 8 of 8 products
Loading...