Shop By Product Matching "Volant"
Choose a Make for your 1963 vehicle
Image
Product
Price
- Steering Wheel;
- Steering Wheel
- Product Attributes:
- Spoke Color: Oem
- Spoke Number: Oem
- Diameter (in.): Oem
-
Features:
- Steering Wheel
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1963 - Jeep CJ5 |
- Flywheel: Steel: Ford 1963-95 SBF 289/302/351: 157T: 24 Lbs
- Flywheel: Steel: Ford 1963-95 SBF 289/302/351: 157T: 24 Lbs
- Product Attributes:
- Flywheel Material: Steel
- Clutch Patterns 1: 10in. & 10.5in. Long & 10in. Diaphragm
- SFI 1.1 Approved: Yes
- Engine Balance:
- Internal Balance
- Internal/external
- Quantity: Sold Individually.
- Pressure Plate Style: Diaphragm
- Crankshaft to Flywheel Bolt Quantity: 6-bolt
- Clutch Patterns 2: 1986-up 10.5in. Mustang Diaphragm With Dowel Pins.
- Counter Weight Kit Included: Yes
- Ring Gear: 157 Tooth
- Make: Ford
- Disc Diameter (in.): 10.500 In.
- Disc Diameter: 10in.,10.5in.
- Replaceable Friction Surface: No
- Weight:
- 24 Lbs
- 24.000 Lbs.
- Marine Use: No
- Material: Billet Steel
- Note 2: Centerbore/crank Boss: Because Of Standard Variances In Oem And Aftermarket Manufacturing Tolerances, The Flywheel To Crankshaft Boss Fit May Have Variations From Slip-fit To Slight Interference. Interference At The Crankshaft “boss” Can Be Corrected By H
- Ring Gear Tooth Quantity: 157-tooth
-
Features:
- • Billet Steel. • 1045 Steel Hardened Ring Gear. • SFI rated.
- McLeod steel flywheels are perfect for street applications where easy stop light acceleration is desired. Steel flywheels come in various weights and dimensions. For race applications, a heavier steel unit is ideal for helping launch a heavy car with a smaller engine with less torque and horsepower. They are CNC machined from billet alloy steel and have 1045 hardened steel ring gears.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1963 - Ford 300 | V | 4261 | Manual | United States | 8 Cyl 4.3L | Base | 260 |
- Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 168T: 30 lbs.
- Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 2pc Rear Main: Internal Balance: 168T: 30 lbs.
- Product Attributes:
- SFI 1.1 Approved: Yes
- Engine Balance: Internal
- Quantity: Sold Individually.
- Pressure Plate Pattern 2: 11 In, 12 In, Borg & Beck/diaphragm
- Pressure Plate Style: Borg & Beck/diaphragm
- Pressure Plate Pattern 1: 10 In, 10.5 In, Borg & Beck/diaphragm
- Rear Main Seal Style: 2-piece
- Crankshaft to Flywheel Bolt Quantity: 6-bolt
- Crankshaft Bolt Hole Quantity: 6
- Make: Chevrolet
- Disc Diameter (in.): 10.500/11.000/12.000 In.
- Tooth Quantity: 168
- Replaceable Friction Surface: No
- Engine 1: 1955-85 Sbc 2pc Seal (large Register)
- Engine 2:
- 1970-1990 Bbc 2pc Seal (large Register)
- 1991-up Bbc 1pc Seal 454, 502, 572 (large Register)
- Weight:
- 30 Lbs.
- 30.000 Lbs.
- Engine 3: 1991-up Bbc 1pc Seal 454, 502, 572 (large Register)
- Marine Use: No
- Material: Billet Steel
- Ring Gear Tooth Quantity: 168-tooth
- Additional Counter Weight Kit Required: 560222
-
Features:
- • Billet Steel. • 1045 Steel Hardened Ring Gear. • SFI rated.
- McLeod steel flywheels are perfect for street applications where easy stop light acceleration is desired. Steel flywheels come in various weights and dimensions. For race applications, a heavier steel unit is ideal for helping launch a heavy car with a smaller engine with less torque and horsepower. They are CNC machined from billet alloy steel and have 1045 hardened steel ring gears.
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1963 - Chevrolet Biscayne | V | 6704 | United States | 8 Cyl 6.7L | Base | 409 |
- Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 168T: 22 lbs.
- Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 2pc Rear Main: Internal Balance: 168T: 22 lbs.
- Product Attributes:
- SFI 1.1 Approved: Yes
- Engine Balance: Internal
- Quantity: Sold Individually.
- Pressure Plate Pattern 2: 11 In, 12 In, Borg & Beck/diaphragm
- Pressure Plate Style: Borg & Beck/diaphragm
- Pressure Plate Pattern 1: 10 In, 10.5 In, Borg & Beck/diaphragm
- Rear Main Seal Style: 2-piece
- Crankshaft to Flywheel Bolt Quantity: 6-bolt
- Crankshaft Bolt Hole Quantity: 6
- Make: Chevrolet
- Disc Diameter (in.): 10.500/11.000/12.000 In.
- Tooth Quantity: 168
- Replaceable Friction Surface: No
- Engine 1: 1955-85 Sbc 2pc Seal (large Register)
- Engine 2:
- 1970-1990 Bbc 2pc Seal (large Register)
- 1991-up Bbc 1pc Seal 454, 502, 572 (large Register)
- Weight:
- 22 Lbs.
- 22.000 Lbs.
- Engine 3: 1991-up Bbc 1pc Seal 454, 502, 572 (large Register)
- Marine Use: No
- Material: Billet Steel
- Ring Gear Tooth Quantity: 168-tooth
- Additional Counter Weight Kit Required: 560222
-
Features:
- • Billet Steel. • 1045 Steel Hardened Ring Gear. • SFI rated.
- McLeod steel flywheels are perfect for street applications where easy stop light acceleration is desired. Steel flywheels come in various weights and dimensions. For race applications, a heavier steel unit is ideal for helping launch a heavy car with a smaller engine with less torque and horsepower. They are CNC machined from billet alloy steel and have 1045 hardened steel ring gears.
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1963 - Chevrolet Suburban | L | 3769 | United States | 6 Cyl 3.8L | Base | 230 |
- steel flywheel
- 2.75 Register; 166 Teeth; 0 Balance
- Steel flywheel Pontiac 1964-72/2.75 register/166T/0 bal.
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1963 - Pontiac Catalina | V | 6376 | 8 Cyl 6.4L | Ventura | 389 |
- Standard Rotation Blower Motor Wheel
- Standard Rotation Blower Motor Wheel
- Blower Motor Wheel
- Product Attributes:
- Motor Dia. MM: 133.35
- Rotation: Cw
- Shaft Shape: Round
- Wheel Height MM: 61.92
- New or Reman: New
- Wheel Dia. IN: 5.250
- Wheel?: Yes
- Wheel Height IN: 2.44
- Motor Dia. IN: 5.250
- Wheel Dia. MM: 133.35
- Hub Offset MM: 22.23
- Shaft Length MM: 61.92
- Hub Offset IN: 0.875
- Description: Blower Motor Wheel
- Offset: 0.875
- O.E. Replacement?: Yes
- Shaft Length IN: 2.44
- Type: Blower Motor Wheels
- Material: Metal
-
Features:
- Galvanized steel construction
- Suitable for a wide variety of applications
- Meets all requirements of international standard ISO 140
- Set screw installation
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 1963 - Buick Electra | V | 6572 | 8 Cyl 6.6L | Sedan | 401 |
- Standard Rotation Blower Motor Wheel
- w/o AC
- Standard Rotation Blower Motor Wheel
- Blower Motor Wheel
- Product Attributes:
- Motor Dia. MM: 133.35
- Rotation: Cw
- Shaft Shape: Round
- Wheel Height MM: 61.92
- New or Reman: New
- Wheel Dia. IN: 5.250
- Wheel?: Yes
- Wheel Height IN: 2.44
- Motor Dia. IN: 5.250
- Wheel Dia. MM: 133.35
- Hub Offset MM: 22.23
- Shaft Length MM: 61.92
- Hub Offset IN: 0.875
- Description: Blower Motor Wheel
- Offset: 0.875
- O.E. Replacement?: Yes
- Shaft Length IN: 2.44
- Type: Blower Motor Wheels
- Material: Metal
-
Features:
- Galvanized steel construction
- Suitable for a wide variety of applications
- Meets all requirements of international standard ISO 140
- Set screw installation
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
This Part Fits the Following OEM/Substitute Numbers:
027073625, 110023, 11031, 1110002, 11135602V, 1199015, 1199026, 15864, 181800, 182601, 209109, 213182, 2239283, 2311424, 2311910, 232182, 260090, 260839...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1963 - Buick Riviera |
- Uses 1 1/4 in. Horn Button
- Steering Wheel; Uses 1 1/4 in. Horn Button;
- Steering Wheel
- Product Attributes:
- Spoke Color: Oem
- Spoke Number: Oem
- Diameter (in.): Oem
-
Features:
- Steering Wheel
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1963 - Jeep CJ6 |
- Centerforce(R) Flywheels; Steel
- 168 Teeth; Weight 31.2 lbs.; 2/3 Bolt Pattern; 14.096 in. Outside Diameter; w/o Counter Balance
- Centerforce(R) SFI-certified steel flywheels are CNC-machined from billet steel for precise; no-hassle; bolt-in installation.
- Billet Steel Flywheel
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- High Quality Billet Steel
- Cad/cam Designed And Cnc Machined
- Precision Balanced
- No-hassle Bolt-in
- Domestic And Import Applications
- Centerforce(R) steel flywheels are manufactured from high quality billet steel and match closely to the original equipment flywheel weight. Billet steel flywheels are available for popular import and domestic vehicles, including trucks. Centerforce steel flywheels are CAD/CAM-designed and CNC-machined from billet steel for precise, no-hassle, bolt-in installation. Centerforce billet steel flywheels are SFI-certified, so you know that you can count on them, on the street and on the track.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Chevrolet Suburban | V | 4638 | 8 Cyl 4.6L | 283 |
- 14 in.; Direct Bolt-On Replacement; Black Leather; Silver 3-Spoke Design
- Classic Series Corvette Steering Wheel; 14 in.; Direct Bolt-On Replacement; Black Leather; Silver 3-Spoke Design;
- Classic Series Corvette Steering Wheel
- Product Attributes:
- Spoke Color: Aluminum
- Spoke Number: 3
- Diameter (in.): 14.000 In.
-
Features:
- No Installation Kit Needed
- Direct Replacement Of Factory Wheel
- Uses Corvette Bolt Pattern
- Uses Factory Horn Button
- This is a direct bolt on Corvette wheel and utilizes the original OEM horn button to mount the wheel to the column. This wheel has a flat dish and is a very fitting replacement for a Corvette. It fits 1963-1975, and 1977 to 1982 model years. Note: It does not fit 1976 Corvettes.
Additional Fitment Information:
| Vehicle |
|---|
| 1963 - Chevrolet Corvette |
Showing 1 - 10 of 34 products
Loading...