Image
Product
Price
- Champion Platinum Power - Boxed - RS10PYC4
- Gap 0.050in; Plug Type RS10PYC4
- Champion Platinum Power 3401 Spark Plug (Carton of 6)
- Platinum Power
- Product Attributes:
- Hex Size:
- 0.625
- 15.880
- Reach: 0.689
- Center Electrode Tip Material: Platinum
- Seat Type: Tapered
- Electrical Terminal Type: Non-removable Nut
- Pre-Gap Size:
- 0.040
- 1.02
- Classification: Champion Platinum Power
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.06
- Plug Type: Rs10pyc4
- Hex Size:
- Champion® Platinum Power™ spark plugs deliver powerful performance. Made from exclusive Heat-Active™ alloy, a fine-wire center electrode and V-trimmed ground electrode provides sharp spark focus.
-
Suggested Purchase Quantity: 10
- Most jobs typically require 10 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Mazda Tribute | L | - | 4 Cyl 2.3L | 140 |
- Champion Platinum Power - Boxed - RS10PYC4
- Gap 0.052in; Plug Type RS10PYC4
- Champion Platinum Power 3401 Spark Plug (Carton of 6)
- Platinum Power
- Product Attributes:
- Hex Size:
- 0.625
- 15.880
- Reach: 0.689
- Center Electrode Tip Material: Platinum
- Seat Type: Tapered
- Electrical Terminal Type: Non-removable Nut
- Pre-Gap Size:
- 0.040
- 1.02
- Classification: Champion Platinum Power
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.06
- Plug Type: Rs10pyc4
- Hex Size:
- Champion® Platinum Power™ spark plugs deliver powerful performance. Made from exclusive Heat-Active™ alloy, a fine-wire center electrode and V-trimmed ground electrode provides sharp spark focus.
-
Suggested Purchase Quantity: 10
- Most jobs typically require 10 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
4305, 8, 8003, 8006, AGSF22FM1, AWSF22E, AWSF32E, AWSF32F, AWSF32P, AWSF42P, HGR7KQC, HGR8DDP, RS10PYC4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Mazda Tribute | V | 2968 | 6 Cyl 3.0L | 181 |
- Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 18.11
- O.E. Quality Direct Fit Replacement Sensor
- Oxygen Sensor - OE Style
- Product Attributes:
- Sensor Type: Narrow-band
- Connector Gender: Male
- Wiring Harness Length: 18.11
- Thread Diameter: 0.708
- Mounting Type: Threaded
- Wire Quantity: 4
- DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Mazda Tribute | Downstream Rear |
- Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 18.11
- O.E. Quality Direct Fit Replacement Sensor
- Oxygen Sensor - OE Style
- Product Attributes:
- Sensor Type: Narrow-band
- Connector Gender: Male
- Wiring Harness Length: 18.11
- Thread Diameter: 0.708
- Mounting Type: Threaded
- Wire Quantity: 4
- DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
This Part Fits the Following OEM/Substitute Numbers:
13117, 13127, 15717, 15718, 15719, 15724, 15752, 213-1317, 213-1408, 213-1459, 22009, 22016, 22071, 22500, 2344609, 250-24001, 250-24070, 250-24127...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Mazda Tribute | Downstream |
- Electric Fuel Pump
- DENSO Fuel Pump
- Electric Fuel Pump
- Electric Fuel Pump - New
- Product Attributes:
- Outlet Quantity: 1
- Gasket Or Seal Included: No
- Negative Ground: Yes
- Mounting Hardware Included: Yes
- Inlet Outside Diameter: 11.000
- Regulator Included: No
- Internal Or External: Internal
- Strainer Included: No
- Seal And Lock Ring Included: No
- Electric Fuel Pump
This Part Fits the Following OEM/Substitute Numbers:
17042-5Y700, 1760 A049, 1760A041, 1760A049, 1760A177, 1760A294, 1F21-13-350C, 1W1Z 9H307-BG, 2C2Z 9H307-AB, 2C6Z 9H307-AB, 2L2Z 9H307-HD, 31110-26330, 31110-26355DS, 31110-26500DS, 31110-26510, 31110-26755DS, 31123-25000, 3C2Z 9H307-AB...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2006 - Mazda MPV |
- Electric Fuel Pump
- Product Attributes:
- Connector Gender: Female
- Voltage: 12.0
- Negative Ground: No
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Fuel Type: Gas
- Connector Shape: Rectangle
- Minimum Pressure: 43
- Seal And Lock Ring Included: No
- Outlet Quantity: 1
- Maximum Amperage Draw: 6.0
- Inlet Outside Diameter: 11.0
- Average Flow Rating: 26.0
- Wire Quantity: 0
- Average Current Draw: 6.0
- Maximum Pressure: 94.0
- Fuel Sending Unit Included: No
- Pump Design: Turbine
- Outlet Outside Diameter:
- 0.313
- 7.9
- Terminal Quantity: 2
- Gasket Or Seal Included: No
- Wiring Harness Included: No
- Position(s): In-tank
- Terminal Type: Pin
- Terminal Gender: Male
- Regulator Included: No
- Internal Or External: Internal
- Strainer Included: No
- Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
This Part Fits the Following OEM/Substitute Numbers:
0K01A13350B, 0K01D-13-35Z, 0K24C-13-35ZA, 0K24T-13-35ZA, 0K29T-13-35ZA, 15100-50G00, 15100-50G10, 15100-54830, 15100-58B00, 15100-58B01, 15100-58B10, 15100-60G00, 15100-60G20, 15100-60G21, 15100-61A1V, 15100-61AA1, 15100-65D02, 15100-65D12...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2006 - Mazda MX-5 Miata | L | 2000 | In-Tank | 4 Cyl 2.0L | 122 |
- WIX Spin-On Lube Filter
- Original Equipment Part Number B 6Y1-14302; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.69
- Burst Pressure: 300
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 9-11 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 292-3B4, 0 451 104 025, 0 451 104 068 RENAULT, 0 451 104 509 RENAULT, 0 986 AF2 428, 0410753, 0410798, 0418055, 0418136, 0418181, 0448001, 051365, 0FE00310, 10-01-121, 1000003052, 1001725, 1001892, 102876...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2006 - Mazda RX-8 | R | 1308 | Canada | 2 Cyl 1.3L | - |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2006 - Mazda MX-5 Miata |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- From Cooler to Pipe
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Mazda 6 | Front Left |
- OEM Grade Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 2.25in.
- Universal OEM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: Midbed
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 1
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51355 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2006 - Mazda B2300 | L | - | Rear | 4 Cyl 2.3L | 140 |
Showing 1 - 10 of 10 products
Loading...