Shop By Product Matching "Whiteline"
Choose a Model for your 1975 Chevrolet
Image
Product
Price
- Engine and gearbox - mount bushings
- Whiteline Complete Engine and Tranmission Mount
- Complete Engine and Transmission Mount Set
-
Features:
- Designed with the installer in mind by reducing the need of specialized skills, tools and equipment
- Internal grease reservoirs provide continual self lubrication for optimum friction management
- Specially bonded design for optimized strength typically required in high load bearing applications
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life
- Supporting metal hardware with corrosion resistant coatings completes the kit for installation
- Whiteline formulation boasts resistance to oil, grease, ozone and weathering
- Whiteline's gearbox steady mount effectively reduces gearbox movement under acceleration and radically reduces idle vibration.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1975 - Chevrolet Corvette | Stingray |
- Engine - mount bushing
- Early style 'Short and Wide' mount - measures 2 5/8" between ears, 1 3/4" tall to the center of the pass-through bolt.
- Whiteline Engine Mount - Short and Wide
- Engine Mount - Early Style Gen I Small Block
-
Features:
- Designed to work with the original bushing rather than replace it
- Internal grease reservoirs provide continual self lubrication for optimum friction management
- Whiteline formulation boasts resistance to oil, grease, ozone and weathering
- Soft factory bushings whilst they do a good job of not transmitting engine vibration, they do create vague and unresponsiveness in the vehicles drive train. Under hard acceleration, the engine and transmission rotates, Whiteline engine mount bushings work in conjunction with the OE rubber bushing giving your car better throttle response as well as more crisp and defined gear shifts.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1975 - Chevrolet Corvette | Stingray |
- Body mount - bushing
- Whiteline Body mount - bushing
- Body Mount Bushing Set
-
Features:
- Kit Contains: 12 Bushings, 6 Tubes, 12 Washers, Grease
- Whiteline's body mounts replace those worn OE body mounts with a bushing that will last. Reduce the risk of body movement and alignment.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1975 - Chevrolet C10 | Custom |
- Engine mount - bushings
- Must reuse existing outer metal shell and drill out the welds/rivets to separte them for installation on the new insert. Designed to reuse the stock 7/16" through bolt. For use in either passenger or driver side.
- Whiteline Motor Mount Inserts
- Motor Mount Inserts
-
Features:
- Designed to work with the original bushing rather than replace it
- Internal grease reservoirs provide continual self lubrication for optimum friction management
- Whiteline formulation boasts resistance to oil, grease, ozone and weathering
- Soft factory bushings whilst they do a good job of not transmitting engine vibration, they do create vague and unresponsiveness in the vehicles drive train. Under hard acceleration, the engine and transmission rotates, Whiteline engine mount bushings work in conjunction with the OE rubber bushing giving your car better throttle response as well as more crisp and defined gear shifts.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1975 - Chevrolet Nova | Custom |
- Transmission - mount bushing
- Replaces 1 bolt and 2 bolt style mounts
- Whiteline Transmission Mount Bushing
- Transmission Mount Bushing Replacement
-
Features:
- Designed with the installer in mind by reducing the need of specialized skills, tools and equipment
- Internal grease reservoirs provide continual self lubrication for optimum friction management
- Kit contains: 1 Mount, 4 Washers, 2 Nuts, 2 Bolts
- Whiteline transmission mounts are designed for those that demand a tough product with no room for movement. Not recommended for street use.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1975 - Chevrolet Malibu | Classic |
- Whiteline Transmission - mount bushings
- Transmission - mount bushings
-
Features:
- Kit Contains: 4 Bushings, 2 Tubes, 2 Plates, Install Guide
- Whiteline's body mounts replace those worn OE body mounts with a bushing that will last. Reduce the risk of body movement and alignment.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1975 - Chevrolet K20 | Silverado |
- Body mount and radiator support - bushings
- Reg Cab 2wd/4wd
- Whiteline Body Mount Bushings And Radiator Support Bushings - Standard Cab
- Body Mount Bushing Kit
-
Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
- Install guide included providing detailed instructions on how to install your new purchase .
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Specially bonded design for optimised strength typically required in high load bearing applications.
- Whiteline formulation technology boasts resistance to oil, grease, ozone and weathering.
- Whiteline bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WDG??s, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1975 - Chevrolet C30 | Scottsdale |
- Sway bar - link washers
- Cupped washers only no bushings
- Whiteline Sway bar - link washers.
- Washer Kit
-
Features:
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Has the thin galvanised metal washers on your OE links flogged out? Whiteline have a specially designed, shaped and case hardened washers to suit the rigours wear and tear loads on sway bar link washers.
Additional Fitment Information:
| Vehicle | Position | Region | Sub Model |
|---|---|---|---|
| 1975 - Chevrolet Corvette | Front | United States | Stingray |
- Sway bar - link washers
- Cupped washers only no bushings
- Whiteline Sway bar - link washers.
- Whiteline Sway Bar Link Cupped Washer Set (8pcs.)
-
Features:
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Has the thin galvanised metal washers on your OE links flogged out? Whiteline have a specially designed, shaped and case hardened washers to suit the rigours wear and tear loads on sway bar link washers.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1975 - Chevrolet Corvette | Front | Stingray |
- Ball joint - boot
- Whiteline Front Ball Joint Dust Boots
- Front Ball Joint Dust Boots
-
Features:
- Designed with the installer in mind by reducing the need of specialized skills, tools and equipment
- Whiteline formulation boasts resistance to oil, grease, ozone and weathering
- Whiteline bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WDG??s, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1975 - Chevrolet Malibu | Classic |
Showing 1 - 10 of 13 products
Loading...