Image
Product
Price
- Black; Includes Bumper And 2 End Caps
- Rear Bumper Kit; Black; Includes Bumper And 2 End Caps;
- Rear Bumper Kit
- Product Attributes:
- Bumper Style: Tube
-
Features:
- Rear Bumper Kit
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Jeep TJ | Rear |
- Front Suspension Stabilizer Bar Link
- OE Bracket not Required Link With 1 Stud(s) Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K3197 Front Suspension Stabilizer Bar Link for Jeep Wrangler
- Product Attributes:
- Bolt Length:
- 194.0
- 7.637
- Bushing Outside Diameter: 13.4
- Greaseable: No
- Part Description: Suspension Stabilizer Bar Link
- Bolt Length:
-
Features:
- EASY TO INSTALL -- Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE -- Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS -- Made from premium materials for long-lasting dependability
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
18263, 265-1432, 2651432, 45G0223, 46G0223A, 5208771AB, 52087771AB, 530-74008, 531-295, 545-1223, 545-1223B, 606.58013, 60758013, DG5451223, DW-K3197, GK3197, GSL3197, JTS674...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Jeep TJ | Front |
- Front Suspension Stabilizer Bar Link
- OE Bracket not Required Link With 1 Stud(s)
- MOOG K3197 Front Suspension Stabilizer Bar Link for Jeep Wrangler
- Product Attributes:
- Bolt Length:
- 194.0
- 7.637
- Bushing Outside Diameter: 13.4
- Greaseable: No
- Part Description: Suspension Stabilizer Bar Link
- Bolt Length:
-
Features:
- EASY TO INSTALL -- Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE -- Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS -- Made from premium materials for long-lasting dependability
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Jeep TJ | Front |
- Front Upper Suspension Control Arm and Ball Joint Assembly
- MOOG RK3198 Front Upper Suspension Control Arm and Ball Joint Assembly for Jeep Liberty
- Product Attributes:
- Ball Joint Stud Type: Threaded
- Control Arm Maximum Length: 15.720
- Grease Fitting Included: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Pre-Greased: Yes
- Ball Joint Mounting Type: Press In
- Control Arm Color: Black
- Bushings Included: Yes
- Control Arm Material: Forged Steel
-
Features:
- CARBON FIBER BEARINGS -- Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
- HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- INSTALLATION READY -- Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION -- Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- QUALITY ASSURANCE -- Laser-etched ID provides visible assurance of genuine MOOG quality
- HARDWARE INCLUDED -- Comes with all necessary hardware for easy, fast installation
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10882, 260-5161, 45D1039, 502-1039, 5021039B, 520-354, 52088632AA, 52088632AB, 52088632AC, 52088632AD, 622.58001, 62358001, 68068615AA, 68068615AB, 810-96517B, 8CB28117, CB3198, CB3198PR...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Jeep Liberty | Front Upper |
- Front Upper Suspension Ball Joint
- MOOG K3134T Front Upper Suspension Ball Joint for Jeep Wrangler
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Maximum Outside Diameter: 2.140
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Jeep Wrangler | Front Upper |
- Front Lower Suspension Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces New Pre-Installed Integral Dust Boot Allows For Ease Of Installation Both New and Original Designs can be Installed on Vehicle
- MOOG K3161T Front Lower Suspension Ball Joint for Jeep Wrangler
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10459, 2601292, 46D2117A, 535-565, 83500202AB, B3161, BJ96125, BJ96125XL, DW-K3161T, FA1633, FA1633E, FA4917, GFA1633, GK3161T, JBJ833, K3161, K3161T, MK3161T...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Jeep TJ | Front Lower |
- Front Lower Suspension Ball Joint
- Both New and Original Designs can be Installed on Vehicle
- MOOG K3161T Front Lower Suspension Ball Joint for Jeep Wrangler
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Jeep TJ | Front Lower |
- Front Upper Suspension Ball Joint
- Includes Patented Cover Plate Design For Tighter Tolerances
- MOOG K3134T Front Upper Suspension Ball Joint for Jeep Wrangler
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Maximum Outside Diameter: 2.140
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02-87002, 10458, 260-1291, 260-1553, 2601291, 287002, 400-71287, 45D0058, 45D0110, 46D0058A, 500-1058, 500-1110, 5001110B, 535-560, 610.58006, 68004085AA, 801-10458, 83500202...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Jeep TJ | Front Upper |
- Black; Includes Bumper And 2 End Caps
- Front Bumper Kit; Black; Includes Bumper And 2 End Caps;
- Front Bumper Kit
- Product Attributes:
- Bumper Style: Tube
-
Features:
- Front Bumper Kit
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Jeep TJ | Front |
- Front Upper Suspension Ball Joint
- .005 (in) Oversize
- MOOG K3134T005 Front Upper Suspension Ball Joint for Jeep Wrangler
-
Features:
- OVERSIZED FOR TIGHT FIT -- Designed with a larger outer diameter to ensure a tight fit in a worn receptacle
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- RESTORES RIDE -- Provides revamped steering and handling feel
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
610.58006, 611.58006, 68004085AA, 83500202, 89-83-500-202, 8983500202, B3134, B3134RD, B3134XL, E-6288-TU, E6288, GK3134T, JBJ1194, MK3134T, TC2062, TXK3134T
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Jeep TJ | Front Upper |
Showing 1 - 10 of 18 products
Loading...