Shop By Product Matching "Yukon Gear"
Choose a Model for your 1969 Ford
Image
Product
Price
- High performance Yukon Ring/Pinion gear set for Ford 9in. in a 4.11 ratio
- 9 in. 10 Bolt; 4.11 Ratio Ford 9 in.; 4.11 Ratio~Ford 9 in.; Ring and Pinion Set; 4.11 Ratio; 28 Spline Pinion
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type: Ford 9 In.
- Gear Ratio: 4.11
- WARNING CA Proposition 65: No
-
Features:
- Fits Ford 9 In.
- 28 Spline Pinion
- 4.11 Ratio
- 10 Ring Gear Bolts
- 9.00 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG F9-411
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1969 - Ford LTD | V | 7014 | Rear | 8 Cyl 7.0L | 428 |
- High performance Yukon Ring/Pinion gear set for Ford 9in. in a 4.11 ratio
- 9 in. Ring Gear; 4.11 Ratio; 28 Spline Pinion Ford 9 in.; 4.11 Ratio~Ford 9 in.; Ring and Pinion Set; 4.11 Ratio; 28 Spline Pinion
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type: Ford 9 In.
- Gear Ratio: 4.11
- WARNING CA Proposition 65: No
-
Features:
- Fits Ford 9 In.
- 28 Spline Pinion
- 4.11 Ratio
- 10 Ring Gear Bolts
- 9.00 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1969 - Ford Falcon | L | 3278 | Rear | 6 Cyl 3.3L | 200 |
- Yukon Master Overhaul kit for 9in. LM102910 diff; with crush sleeve eliminator
- PinSeal; CrshSlv; PinDpthShms; CarShms; MrkgCmpd; PinNut; O-Rng; Slngr; Gskt; 20in. Ring Bolts Ford 9 in.~Ford 9 in. Rear; Differential Rebuild Kit; Timken Bearings; LM102910/ LM102949 Carrier Bearings (Fits 1.78 in. Carrier Journal & 2.89 in. Dropout); Fits Non Daytona Pinion Support; Includes crush sleeve eliminator~LM102910 carrier race; Includes crush sleeve eliminator
- Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
- Yukon Differential Master Overhaul Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Ford 9 In.
-
Features:
- Fits Ford 9 in. w/LM102940 Carrier Race
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings/Races
- Pinion Bearings/Races
- Pilot Bearing
- Pinion Seal
- Complete Shim Kit
- Includes Ring Gear Bolts
- Pinion Nut
- Crush Sleeve Eliminator
- Thread Locker
- Marking Compound w/Brush And Gasket
- Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1969 - Ford Ranchero | L | 4098 | 6 Cyl 4.1L | 250 |
- Yukon Master Overhaul kit for 9in. LM102910 diff; with crush sleeve eliminator
- PinSeal; CrshSlv; PinDpthShms; CarShms; MrkgCmpd; PinNut; O-Rng; Slngr; Gskt; 20in. Ring Bolts Ford 9 in.~LM102910 carrier race; Includes crush sleeve eliminator~Ford 9 in. Rear; Differential Rebuild Kit; Timken Bearings; LM102910/ LM102949 Carrier Bearings (Fits 1.78 in. Carrier Journal & 2.89 in. Dropout); Fits Non Daytona Pinion Support; Includes crush sleeve eliminator
- Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
- Yukon Differential Master Overhaul Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Ford 9 In.
-
Features:
- Fits Ford 9 in. w/LM102940 Carrier Race
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings/Races
- Pinion Bearings/Races
- Pilot Bearing
- Pinion Seal
- Complete Shim Kit
- Includes Ring Gear Bolts
- Pinion Nut
- Crush Sleeve Eliminator
- Thread Locker
- Marking Compound w/Brush And Gasket
- Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1969 - Ford Fairlane | V | 6997 | 8 Cyl 7.0L | 427 |
- Yukon Master Overhaul kit for 9in. LM102910 diff; with crush sleeve eliminator
- PinSeal; CrshSlv; PinDpthShms; CarShms; MrkgCmpd; PinNut; O-Rng; Slngr; Gskt; 20in. Ring Bolts Ford 9 in.~LM102910 carrier race; Includes crush sleeve eliminator~Ford 9 in. Rear; Differential Rebuild Kit; Timken Bearings; LM102910/ LM102949 Carrier Bearings (Fits 1.78 in. Carrier Journal and 2.89 in. Dropout); Fits Non Daytona Pinion Support; Includes crush sleeve eliminator
- Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
- Yukon Differential Master Overhaul Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Ford 9 In.
-
Features:
- Fits Ford 9 in. w/LM102940 Carrier Race
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings/Races
- Pinion Bearings/Races
- Pilot Bearing
- Pinion Seal
- Complete Shim Kit
- Includes Ring Gear Bolts
- Pinion Nut
- Crush Sleeve Eliminator
- Thread Locker
- Marking Compound w/Brush And Gasket
- Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine Version | CID |
|---|---|---|---|---|---|
| 1969 - Ford Falcon | V | 5753 | 8 Cyl 5.8L | Windsor | 351 |
- High performance Yukon Ring/Pinion gear set for Ford 9in. in a 3.50 ratio
- 9 in. 10 Bolt; 3.50 Ratio Ford 9 in.; 3.50 Ratio~Ford 9 in.; Ring and Pinion Set; 3.50 Ratio; 28 Spline Pinion
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type: Ford 9 In.
- Gear Ratio: 3.5
- WARNING CA Proposition 65: No
-
Features:
- Fits Ford 9 In.
- 28 Spline Pinion
- 3.50 Ratio
- 10 Ring Gear Bolts
- 9.00 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG F9-350
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Engine Version | CID |
|---|---|---|---|---|---|---|
| 1969 - Ford Fairlane | V | 5753 | Rear | 8 Cyl 5.8L | Cleveland | 351 |
- High performance Yukon Ring/Pinion gear set for Ford 9in. in a 3.50 ratio
- 9 in. Ring Gear; 3.50 Ratio; 28 Spline Pinion Ford 9 in.; 3.50 Ratio~Ford 9 in.; Ring and Pinion Set; 3.50 Ratio; 28 Spline Pinion
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type: Ford 9 In.
- Gear Ratio: 3.5
- WARNING CA Proposition 65: No
-
Features:
- Fits Ford 9 In.
- 28 Spline Pinion
- 3.50 Ratio
- 10 Ring Gear Bolts
- 9.00 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Engine Version | CID |
|---|---|---|---|---|---|---|
| 1969 - Ford Fairlane | V | 5753 | Rear | 8 Cyl 5.8L | Cleveland | 351 |
- High performance Yukon Ring/Pinion gear set for Ford 9in. in a 4.56 ratio
- 9 in. 10 Bolt; 4.56 Ratio Ford 9 in.; 4.56 Ratio~Ford 9 in.; Ring and Pinion Set; 4.56 Ratio; 28 Spline Pinion
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type: Ford 9 In.
- Gear Ratio: 4.56
- WARNING CA Proposition 65: No
-
Features:
- Fits Ford 9 In.
- 28 Spline Pinion
- 4.56 Ratio
- 10 Ring Gear Bolts
- 9.00 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG F9-456
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1969 - Ford Bronco | L | 2786 | Rear | 6 Cyl 2.8L | 170 |
- Yukon standard open spider gear kit for Dana 30 with 27 spline axles
- Dana 30/Reverse; 27 Spline Dana 30; Spider Gear Set; 27 spline; Fits Standard Open Carrier~Dana 30; Standard Rotation; 27 Spline
- Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
- Spider Gear Set
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fit Dana Spicer 30 Open Differential w/27 Spline Axles
- Spider Gear Kit
- Includes Two Side Gears
- Two Pinion Gears
- Cross Pin Shaft
- Cross Pin Bolt And Spider Gear Thrust Washers
- Yukon Gear & Axle spider gear kits feature higher quality materials and better manufacturing techniques than OEM to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.
This Part Fits the Following OEM/Substitute Numbers:
ZIKD30-S-27
Additional Fitment Information:
| Vehicle |
|---|
| 1969 - Ford Bronco |
- Yukon standard open spider gear kit for Dana 30 with 27 spline axles
- Dana 30/Reverse; 27 Spline Dana 30; Standard Rotation; 27 Spline~Dana 30; Spider Gear Set; 27 spline; Fits Standard Open Carrier
- Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
- Spider Gear Set
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fit Dana Spicer 30 Open Differential w/27 Spline Axles
- Spider Gear Kit
- Includes Two Side Gears
- Two Pinion Gears
- Cross Pin Shaft
- Cross Pin Bolt And Spider Gear Thrust Washers
- Yukon Gear & Axle spider gear kits feature higher quality materials and better manufacturing techniques than OEM to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.
Additional Fitment Information:
| Vehicle |
|---|
| 1969 - Ford Bronco |
Showing 1 - 10 of 46 products
Loading...