Image
Product
Price
- 6" Suspension Lift Kit
- 18" or larger diameter wheels required. Stock 17"/18" wheels cannot be reinstalled. Stock 20" wheels can be used with up to a 305/60R20 tire. 18" wheels with 5-5.5" of backspacing should be test fit prior to mounting tires to ensure proper tie rod end clearance. 37x12.50 tires may require some trimming. Kit includes a 5" rear block kit (#F2639) that typically nets a slight tail high stance. A 4" rear block kit (#F2419) is available in the options if a more level stance is preferred. Models equipped with Auto 4wd may require front driveshaft replacement. Requires frame bracket modification. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration. Will NOT work on Diesel Models.
- Take your F150 to new heights with this 6" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to strut spacers and rear block kit to level out the stance. Get the look, performance, and capability your truck deserves with clearance for up to 37" tires.
- In the box: All Necessary Mounting / Installation Hardware Differential Drop Brackets Driveshaft Spacer Frame Crossmembers Rear Lift Block & U-Bolt Kit Steering Knuckles Strut Spacers
- Product Attributes:
- Front Lift Method: Knuckle & Strut Spacer
- Cutting Required: No
- Wheel Size: 18 X 9
- Max Tire Size 3: 37 X 12.5
- Back Spacing: 5.5"
- Front Lift Height: 6"
- Max Tire Size 2: 37 X 12.5
- Lift Type: Lift Kit
- Rear Lift Method: Cast Blocks
- Welding Required: No
- Wheel Size 2: 20 X 9
- Wheel Size 3: 22 X 9
- Accommodates Factory Wheels: See Notes
- Rear Lift Height: 5"
- Back Spacing 2: 5.5"
- Back Spacing 3: 5.5"
-
Features:
- High strength crossmembers to correct lower control arm positioning
- Ductile iron steering knuckles to correct steering geometry and maintain ESC system compatibility
- Top mounted strut spacers to provide lift and install easily
- Differential skid plate for improved offroad protection
- Rear lift blocks and u-bolts to lift and level the stance
- Sway bar, brake line and bump stop relocation brackets to correct operating angles
- Zone Offroad produces heavy-duty lift kits for Chevrolet, GMC, Ford, RAM, Dodge Toyota, and Jeep trucks. A variety of lift heights are available to suit your truck's tire and ground clearance from 2", 3", 4" & 6". Lift kit features may include heavy-duty crossmembers, steering knuckles, strut spacers, and rear block kits to level out the stance. Custom-valved shock absorbers are available to improve performance and ride-quality on and off-road. All suspension systems are made in the USA and powdercoated for a long-lasting appearance. Shop Zone affordable and quality suspension lift kit systems!
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2016 - Ford F-150 | 4WD |
- 2" Lift Kit
- Will not work with rear factory top mounted overloads.
- The Super Duty comes from the factory with the front end raked down lower 1-2". In addition to the 2" leveling kit option offered, Zone Offroad also offers a complete 2" lift kit that combines the 2" front leveling spacers with a replacement rear 4" lift block for a level to slightly tail high stance. This is a great option for truck with camper shells or tow regularly to eliminate the tail-low stance while allowing clearance for up to 35" tires.
- In the box: Coil Spacers Rear Lift Block & U-Bolt Kit Alignment Cams
- Product Attributes:
- Lift Type: Lift Kit
- Rear Lift Method: Fabricated Blocks
- Front Lift Method: Coil Spring Spacers
- Rear Lift Height: 2"
- Wheel Size: 20 X 9
- Back Spacing: 4.5-5"
- Front Lift Height: 2"
-
Features:
- Bolt-in lower front coil spacers raise the stance while retaining ride quality
- Upper ball joint cams allow you to dial in alignment specs for factory like handling.
- Heavy-duty fabricated rear blocks are fully welded and integrate a bump stop wing for proper bump stop engagement.
- High strength, black e-coated u-bolts to secure the new rear lift blocks.
- Zone Offroad produces heavy-duty lift kits for Chevrolet, GMC, Ford, RAM, Dodge Toyota, and Jeep trucks. A variety of lift heights are available to suit your truck's tire and ground clearance from 2", 3", 4" & 6". Lift kit features may include heavy-duty crossmembers, steering knuckles, strut spacers, and rear block kits to level out the stance. Custom-valved shock absorbers are available to improve performance and ride-quality on and off-road. All suspension systems are made in the USA and powdercoated for a long-lasting appearance. Shop Zone affordable and quality suspension lift kit systems!
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2016 - Ford F-250 Super Duty | 4WD |
- 2" Strut Spacer Leveling Kit
- Fitment: Will not fit Raptor models.
- You've got the truck you want, now get the level look you want. This easy-to-install 2" strut spacer maintains your factory ride and doesn?t require a strut compressor or disassembly of the strut. Fits 2009 - 2020 Ford F-150 - 4WD models.
- In the box: All Necessary Mounting / Installation Hardware Strut Spacers
- Product Attributes:
- Lift Type: Leveling Kit
- Rear Lift Method: None
- Welding Required: No
- Is Adjustable: No
- Front Lift Method: Strut Spacers
- Cutting Required: No
- Accommodates Factory Wheels: Yes
- Wheel Size: Stock
- Back Spacing: Stock
- Front Lift Height: 2"
-
Features:
- bolt-on design for easy installation
- no strut compressor required.
- 100% bolt-on design for easy installation.
- Detailed step-by-step instructions and Zone Offroad decals.
- Grade 8, heavy-duty hardware included.
- Maintains factory ride quality and handling characteristics.
- Shop Zone Leveling Kits for Truck and Jeep! Get a level appearance plus additional clearance with a Zone Offroad Leveling Kit for Chevy / GMC, Ford, RAM, Dodge, Toyota, and Nissan trucks as well as Jeeps. Leveling Kits are available in 1" to 2.5" heights depending on the application. Zone Offroad's research and development team designs affordable, bolt-on solutions for each truck to ensure proper fitment including coil spring spacers, strut spacers, and torsion key kits -- all the way up to our control arm leveling kits for GM and RAM applications. All Zone Offroad Leveling Kits are made in the USA and powder-coated. 1 Inch to 2.5 Inch Front Lift Heights | Affordable Leveling Solution | Smooth, factory-like ride quality | Easy to Install - Bolt On | Designed to not damage the vehicle
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Ford F-150 |
Showing 1 - 3 of 3 products
Loading...