Image
Product
Price
- Rebel Series 2-1/2 IN 409 Stainless Steel Cat-Back Exhaust System w/Black Tip
- 2.5 in. Tubing; 409 Stainless Steel; Includes Muffler Assy/Tail Pipe/Hardware/Dual 4.5 in. Black Tips; +9 HP/+14 Lbs. X Ft. Torque
- Rebel Series 2-1/2 IN 409 Stainless Steel Cat-Back Exhaust System w/Black Tip Jeep Wrangler (JK) 07-18 V6-3.6L/3.8L
- Rebel Series Cat-Back Exhaust System
- Product Attributes:
- Tail Pipe Material: Stainless Steel
- Tubing Diameter: 2.500 In.
- Exhaust Type: Cat-back
- Exit Position: Dual
- Tip Diameter: 4.500 In.
- WARNING CA Proposition 65: Yes
- Exit Style: Straight
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 4.500 In.
-
Features:
- Unique Dual Center Exit Exhaust System
- High-Flow Stainless Steel Muffler
- Mandrel Bent Stainless Steel Tubing
- Bolt-On Installation
- Hardware Included
- Introducing an all new Rebel Series Dual Center Exit Cat-Back exhaust system for the Jeep Wrangler (JK) with V6-3.6L/3.8L engine. This unique Rebel Series exhaust system is designed with dual center exit tips for an aggressive look. The Tips are 4-1/2" with aFe power plates and constructed out of stainless steel for durability. This performance cat-back exhaust is constructed of 2-1/2" MIG-welded mandrel-bent stainless steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. In testing, this cat-back exhaust system added an astounding +9 horsepower and +14 lbs. x ft. of torque as verified by our in house dyno. This exhaust system comes complete with a 22" free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - Jeep Wrangler | V | 3604 | 6 Cyl 3.6L | Unlimited Sahara | 220 |
- Takeda 3 IN to 2-1/2 IN 304 Stainless Steel Cat-Back Exhaust System w/Black Tips
- 3 in. To 2.5 in. Tubing; Includes Mid-Pipe/RH Muffler Section/LH Muffler/Dual 4 in. Stainless Steel Black Tips; +17 hp/+20 ft/lbs. Torque;Legal in California Only for Racing Vehicles
- Takeda 3 IN to 2-1/2 IN 304 Stainless Steel Cat-Back Exhaust System w/Black Tips Mitsubishi Lancer EVO X 08-15 I4-2.0L (t)
- Takeda Cat-Back Exhaust System
- Product Attributes:
- Tail Pipe Material: Stainless Steel
- Exhaust Type: Cat-back
- Exit Position: Dual Rear
- WARNING CA Proposition 65: Yes
-
Features:
- Mufflers Deliver A Deep Powerful Tone
- 100 Percent Hand TIG-Welded
- Laser Etched Takeda Logo
- Hassle Free Installation
- Achieve performance gains of up to +17 HP and +20 lbs. x ft. torque with aFe's Takeda 3"-2 ½" mandrel bent, brushed finish 304 stainless steel cat-back exhaust system for your 2008-2015 Evo X. Dual, high-flow 304 stainless steel mufflers improve performance across the power band and delivers a powerful exhaust tone. 100% hand TIG-welded for strength and durability and long lasting, good looks, this system is finished with dual, black stainless steel tips etched with Takeda logos for a unique, custom appearance. In testing, the cat-back exhaust system resulted in gains up to +17 horsepower and +20 lbs. x ft. of torque, as measured on our in-house dyno. Dual, free-flowing, 304 stainless steel mufflers are used to absorb high pitch tones producing a powerful sound and unleashing more horsepower and torque potential. This dual rear-exit system features 4" round, double-wall, angle-cut black stainless steel exhaust tips with laser-etched Takeda logo for a custom appearance.
Additional Fitment Information:
| Vehicle | Engine Designation | Sub Model | Engine VIN | Aspiration |
|---|---|---|---|---|
| 2012 - Mitsubishi Lancer | 4B11 | Evolution MR | V | Turbocharged |
- Takeda 3 IN to 2-1/2 IN 304 Stainless Steel Cat-Back Exhaust System w/Black Tips
- 3 in. To 2.5 in. Tubing; Includes Mid-Pipe/RH Muffler Section/LH Muffler/Dual 4 in. Stainless Steel Black Tips; +17 hp/+20 ft/lbs. Torque;May Never be Used Upon Highway
- Takeda 3 IN to 2-1/2 IN 304 Stainless Steel Cat-Back Exhaust System w/Black Tips Mitsubishi Lancer EVO X 08-15 I4-2.0L (t)
- Takeda Cat-Back Exhaust System
- Product Attributes:
- Tail Pipe Material: Stainless Steel
- Exhaust Type: Cat-back
- Exit Position: Dual Rear
- WARNING CA Proposition 65: Yes
-
Features:
- Mufflers Deliver A Deep Powerful Tone
- 100 Percent Hand TIG-Welded
- Laser Etched Takeda Logo
- Hassle Free Installation
- Achieve performance gains of up to +17 HP and +20 lbs. x ft. torque with aFe's Takeda 3"-2 ½" mandrel bent, brushed finish 304 stainless steel cat-back exhaust system for your 2008-2015 Evo X. Dual, high-flow 304 stainless steel mufflers improve performance across the power band and delivers a powerful exhaust tone. 100% hand TIG-welded for strength and durability and long lasting, good looks, this system is finished with dual, black stainless steel tips etched with Takeda logos for a unique, custom appearance. In testing, the cat-back exhaust system resulted in gains up to +17 horsepower and +20 lbs. x ft. of torque, as measured on our in-house dyno. Dual, free-flowing, 304 stainless steel mufflers are used to absorb high pitch tones producing a powerful sound and unleashing more horsepower and torque potential. This dual rear-exit system features 4" round, double-wall, angle-cut black stainless steel exhaust tips with laser-etched Takeda logo for a custom appearance.
Additional Fitment Information:
| Vehicle | Engine Designation | Sub Model | Engine VIN | Aspiration |
|---|---|---|---|---|
| 2012 - Mitsubishi Lancer | 4B11 | Evolution GSR | V | Turbocharged |
- Twisted Steel 409 Stainless Steel Loop-Delete Header/Y-Pipe Power Package
- 2-2 1/2 in. Stainless Steel Tubing; Includes Merge Collector/Y-Pipe/Loop Delete/Hardware;Not Legal For Sale Or Use In California
- Twisted Steel 409 Stainless Steel Loop-Delete Header/Y-Pipe Power Package Jeep Wrangler (JK) 12-18 V6-3.6L
- Race Series Twisted Steel Delete Down- And Y-Pipe
- Product Attributes:
- Tail Pipe Material: Stainless Steel
- Tubing Diameter: 2.000 In.
- Exhaust Type: Down Pipe-back
- Exit Position: Rear
- Tip Diameter: N/a
- WARNING CA Proposition 65: Yes
- Exit Style: Straight
- Inlet Inside Diameter: 2.000 In.
- Outlet Outside Diameter: 2.500 In.
-
Features:
- Hassle-Free Installation
- Leak-Free Seal
- Heavy Duty Flanges
- These aFe Atlas XP Y-pipes feature a true 2 Into 1 mitered merge collector that eliminates dead space that can cause turbulence and hinder the flow that formed collectors are prone to produce. They are manufactured from aluminized steel, feature mandrel-bent piping, and high-quality OEM-style flanges with band clamps are used for a bolt-on, leak-free installation. The Y-pipes are available with high-flow 300 cell catalytic converters for better flow without CEL lights, or without catalytic converters for true race performance.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2012 - Jeep Wrangler | V | 3604 | Manual | 6 Cyl 3.6L | Unlimited Sahara | 220 |
- Momentum GT PRO 5R Cold Air Intake System
- Includes Pre-Oiled Air Filter/Housing w/Air Inlet and Sight Window/Intake Tube/Hardware; +16 HP/+15 Lbs. x Ft. Torque;CARB E.O. D-550-22 Will Not Fit Vehicles w/Shaker Hood
- Momentum GT PRO 5R Cold Air Intake System Dodge Challenger/Charger SRT/SRT-8 11-18 V8-6.4L HEMI
- Momentum GT Pro 5R Air Intake System
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- 1-Piece Housing
- 5 Layer Performance Air Filter
- Premium Hardware
- Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - Dodge Challenger | V | 6424 | 8 Cyl 6.4L | SRT8 | 392 |
- Magnum FORCE Stage-2 PRO 5R Cold Air Intake System
- Includes Pre-Oiled Air Filter/Top Mount Heat Shield/Intake Tube/3 Angle Adapter; +18 HP/+23 lbs. ft. Torque;CARB E.O. D-550-27
- Magnum FORCE Stage-2 PRO 5R Cold Air Intake System Dodge/RAM 1500 09-18 V8-5.7L HEMI
- Magnum FORCE Stage-2 Pro 5R Air Intake System
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Uses Pro 5R Filter For Maximum Air Flow
- Rotomolded Plastic Tube For Maximum Air Flow
- 98% cfm Flow Gain
- Improved Throttle Response
- Repl. Factory Intake For Improved HP/Torque/Styling
- Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ram 1500 | V | - | 8 Cyl 5.7L | 345 |
- Momentum GT PRO 5R Cold Air Intake System
- Includes Pre-Oiled Air Filter/Housing w/Air Inlet and Sight Window/Intake Tube/Hardware; +16 HP/+15 Lbs. x Ft. Torque Will Not Fit w/Factory HID Headlights
- Momentum GT PRO 5R Cold Air Intake System Dodge Challenger/Charger SRT/SRT-8 11-18 V8-6.4L HEMI
- Momentum GT Pro 5R Air Intake System
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- 1-Piece Housing
- 5 Layer Performance Air Filter
- Premium Hardware
- Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - Chrysler 300 | V | 6424 | 8 Cyl 6.4L | SRT8 | 392 |
- SCORCHER HD Module
- Easy Plug and Play Installation; 4 Power Position Settings; Adjust Power Settings w/1 Button Switch;Not Legal For Sale Or Use In California HP Increase +60 hp; Torque Increase +90 lbs./ft.~ Increased Throttle And Acceleration Response
- SCORCHER HD Module Dodge Diesel Trucks 07.5-12 L6-6.7L (td)
- SCORCHER HD Performance Module
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Direct Plug And Play Power
- Increased Turbo Boost And Fuel Pressure
- In Cabin On The Fly Power Adjustment
- 4 Position Switch
- Significant Power Gain And Reduce Turbo Lag
- Leaves No Trace On ECU
- Gains Plus 60 HP And 90 ft./lbs. Torque
- Put up to 40hp and 51lbs. x ft. torque to your N54 today! The aFe Power SCORCHER Module is designed to alter the pressure sensor signals to increase turbo boost to an optimum level throughout the entire RPM range. The result is a harmonious balance between power, throttle response and drivability. This module provides a hassle-free installation with no cutting, drilling or splicing required during the 30 minute installation time. Factory electronic accessories are not affected by installing the Scorcher module.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2012 - Ram 2500 | Laramie Longhorn |
- Magnum FORCE Stage-2 PRO 5R Cold Air Intake System
- Includes Pre-Oiled Air Filter/Heat Shield/Intake Tube/Throttle Body Adaptor/T-Bolt Clamp; +17 HP/+17 Lbs. x Ft. Torque;CARB E.O. D-550-22
- Magnum FORCE Stage-2 PRO 5R Cold Air Intake System Dodge Challenger/Charger/Chrysler 300C 11-18 V8-5.7L HEMI
- Magnum FORCE Stage-2 Pro 5R Air Intake System
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Uses 360 deg. Radial Flow Air Filter
- 5 Layer Oiled Cotton Gauze Media
- Washable And Reusable Air Filter
- Durable 16 Gauge Black Powdercoat Housing
- Rotomolded Heat-Insulating Tube
- Direct Bolt-On
- Stainless Steel T-Bolt Clamp
- Silicone Throttle Body Adapter
- All Hardware Included
- 40% cfm Flow Gain
- 17 Horsepower Gain/17 ft./lbs. Torque Gain
- 2 Year Limited Warranty
- Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - Dodge Charger | V | - | 8 Cyl 5.7L | SE | 345 |
- Momentum GT PRO DRY S Cold Air Intake System
- Includes Oil-Free Air Filter/Sealed Housing w/Auxiliary Air Scoop/Molded Intake Tube/Built-In Sight Window; +16 HP/+24 lbs. x ft. Torque;Not Legal For Sale Or Use In California Not Legal For Sale Or Use On Vehicles Registered In California
- Momentum GT PRO DRY S Cold Air Intake System Jeep Grand Cherokee (WK2) 11-18 V8-5.7L HEMI
- Momentum GT Pro Dry S Air Intake System
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Outflows Factory Intake By Up To 34%
- CAD-Designed Roto-Molded Intake Tube
- High Quality 1-Piece Sealed Housing w/Aux. Air Scoop
- Pro DRY S Oil-Free 3 Layer Synthetic Media
- Unique Housing To Filter Interface-Patent Pending
- Built In Sight Window Provides Easy Inspection Of Filter
- No Cutting Or Drilling On Factory Parts For Faster Installation
- Unique One-Piece Housing with Sight Window: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. (Housing-to-Filter Interface US PAT 9440175) Huge 3-Layer Performance Air Filter: The Momentum GT is designed around an oil-free, large 8" tall 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter to housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium Hardware: Premium stainless steel T-bolt clamps and a silicone hump coupler are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - Jeep Grand Cherokee | V | - | 8 Cyl 5.7L | Laredo | 345 |
Showing 1 - 10 of 31 products
Loading...