Image
Product
Price
- Rebel Series 2-1/2 IN 409 Stainless Steel Cat-Back Exhaust System w/Black Tip
- 2.5 in. Tubing; 409 Stainless Steel; Includes Muffler Assy/Tail Pipe/Hardware/Dual 4.5 in. Black Tips; +9 HP/+14 Lbs. X Ft. Torque
- Rebel Series 2-1/2 IN 409 Stainless Steel Cat-Back Exhaust System w/Black Tip Jeep Wrangler (JK) 07-18 V6-3.6L/3.8L
- Rebel Series Cat-Back Exhaust System
- Product Attributes:
- Tail Pipe Material: Stainless Steel
- Tubing Diameter: 2.500 In.
- Exhaust Type: Cat-back
- Exit Position: Dual
- Tip Diameter: 4.500 In.
- WARNING CA Proposition 65: Yes
- Exit Style: Straight
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 4.500 In.
-
Features:
- Unique Dual Center Exit Exhaust System
- High-Flow Stainless Steel Muffler
- Mandrel Bent Stainless Steel Tubing
- Bolt-On Installation
- Hardware Included
- Introducing an all new Rebel Series Dual Center Exit Cat-Back exhaust system for the Jeep Wrangler (JK) with V6-3.6L/3.8L engine. This unique Rebel Series exhaust system is designed with dual center exit tips for an aggressive look. The Tips are 4-1/2" with aFe power plates and constructed out of stainless steel for durability. This performance cat-back exhaust is constructed of 2-1/2" MIG-welded mandrel-bent stainless steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. In testing, this cat-back exhaust system added an astounding +9 horsepower and +14 lbs. x ft. of torque as verified by our in house dyno. This exhaust system comes complete with a 22" free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2010 - Jeep Wrangler | V | 3778 | 6 Cyl 3.8L | Unlimited Sport | 231 |
- Rebel Series 2.5in 409 Stainless Steel Cat-Back Exhaust System w/Polished Tips
- 2.5 in. Tubing; Includes Dual Mufflers/Bayonet Hangers/4.5 in. Polished Tips w/AFE Logo; 409 Stainless Steel
- Rebel Series 2.5in 409 Stainless Steel Cat-Back Exhaust System w/Polished Tips Jeep Wrangler (JL) 2018 V6-3.6L
- Rebel Series Cat-Back Exhaust System
- Product Attributes:
- Tail Pipe Material: Stainless Steel
- Tubing Diameter: 2.500 In.
- Exhaust Type: Cat-back
- Exit Position: Rear
- WARNING CA Proposition 65: Yes
-
Features:
- Free Flowing Stainless Steel Muffler
- Hassle Free Installation
- MIG Welded For Strength
- This Rebel Series cat-back exhaust delivers power and sound by adding horsepower and torque as measured on our in-house dyno. Dual polished tips exit in front of the rear passenger side tire to make this system look as good as it performs. Factory mounting locations provide a stable and hassle-free installation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2018 - Jeep Wrangler | V | 3604 | 6 Cyl 3.6L | Unlimited Rubicon | 220 |
- ROCK BASHER 2-1/2in to 3in 409 Stainless Steel Cat-Back Before Axle Turn-Down Ex
- 3 in. Tubing; 409 Stainless Steel; Rear Exit; Includes Muffler Assembly/Turndown Tip; Aggressive Sound; +9 HP/+8 lbs/ft. Torque
- ROCK BASHER 2-1/2in to 3in 409 Stainless Steel Cat-Back Before Axle Turn-Down Exhaust System Jeep Wrangler (JL) 2018 V6-3.6L
- ROCK BASHER Axle-Back Exhaust System
- Product Attributes:
- Exhaust Type: Axle-back
- Exit Position: Rear
- WARNING CA Proposition 65: Yes
-
Features:
- 409 Stainless Steel Tubing For Unrestrictive Exhaust Flow
- Free Flowing Stainless Steel Muffler
- Muffler Has A Powerful Aggressive Performance Tone
- Shortened Pre-Axle Turn Down Exit Offers More Ground Clearance
- 100% Hand MIG-Welded For Strength and Durability
- This durable, purpose-built, cat-back exhaust system for the Jeep Wrangler JL 2 door improves clearance over rough terrain for the adventurist who wants it all. Large, 3" mandrel-bent 409 stainless steel tubing outflows the restrictive factory exhaust to deliver gains of up to +9 horsepower and +8 lbs. x ft. of torque, as measured on our in-house dyno. The free-flowing muffler delivers a powerful, performance tone while the ROCK BASHER'S shortened pre-axle turndown tip handles off-road obstacles. This system utilizes factory mounts for a quick and simple install.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2018 - Jeep Wrangler | V | 3604 | 6 Cyl 3.6L | Sport S | 220 |
- MACH Force-Xp 2.5 IN 409 Stainless Steel Cat-Back High-Tuck Exhaust System
- 2.5 in. Tubing; 409 Stainless Steel; Includes Muffler Assy/Extension Pipe/Mid-Pipe/Tailpipe/Hardware/Hi-Tuck Tip; +9 HP/+8 lbs./ft. Torque
- MACH Force-Xp 2.5 IN 409 Stainless Steel Cat-Back High-Tuck Exhaust System Jeep Wrangler (JL) 2018 V6-3.6L
- MACH Force-Xp Axle-Back Exhaust System
- Product Attributes:
- Tubing Diameter: 2.500 In.
- Exhaust Type: Axle-back
- Exit Position: Rear
- WARNING CA Proposition 65: Yes
-
Features:
- Outlasts and Outperforms Stock Exhaust
- Hi-Tuck Design For Clearance and Greater Approach Angles
- 100 Percent Hand MIG-Welded For Strength and Durability
- Factory Style Bayonet Hangers
- Ball Flange Connection
- Quality Hardware For Easy Installation
- If you want proven performance gains, more ground clearance and sound from your Jeep JL 3.6L 2 or 4 door, this Mach Force-XP cat-back exhaust system is what you need. 2-1/2" mandrel-bent 409 stainless steel tubing and 14" high flow muffler improves exhaust flow for increased horsepower and torque. In-house dyno testing resulted in gains of up to +9 horsepower and +8 lbs. x ft. of torque and delivers a noticeable exhaust tone. The Hi-Tuck designed tailpipe "tip" gives you extra clearance during extreme angle climbs or descents and an "Old School" traditional Jeep look. Factory-style hangers, ball flange connection and quality hardware are included for a hassle-free install.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Jeep Wrangler | V | 3604 | 6 Cyl 3.6L | Rubicon | 220 |
- MACH Force-Xp 2.5 IN 409 Stainless Steel Cat-Back High-Tuck Exhaust System w/Bla
- 2.5in. Tubing; 409 Stainless Steel; Includes Muffler Assy/Extension Pipe/Mid-Pipe/Tailpipe/Hardware/3.5in. Black Tip; +9 HP/8 lbs./ft. Torque
- MACH Force-Xp 2.5 IN 409 Stainless Steel Cat-Back High-Tuck Exhaust System w/Black Tip Jeep Wrangler (JL) 2018 V6-3.6L
- MACH Force-Xp Axle-Back Exhaust System
- Product Attributes:
- Tubing Diameter: 2.500 In.
- Exhaust Type: Axle-back
- Exit Position: Rear
- WARNING CA Proposition 65: Yes
-
Features:
- Outlasts and Outperforms Stock Exhaust
- Hi-Tuck Design For Clearance and Greater Approach Angles
- 100 Percent Hand MIG-Welded For Strength and Durability
- Factory Style Bayonet Hangers
- Ball Flange Connection
- Quality Hardware For Easy Installation
- If you want proven performance gains, more ground clearance and sound from your Jeep JL 3.6L 2 or 4 door, this Mach Force-XP cat-back exhaust system is what you need. 2-1/2" mandrel-bent 409 stainless steel tubing and 14" high flow muffler improves exhaust flow for increased horsepower and torque. In-house dyno testing resulted in gains of up to +9 horsepower and +8 lbs. x ft. of torque and delivers a noticeable exhaust tone. The Hi-Tuck designed tailpipe "tip" gives you extra clearance during extreme angle climbs or descents and an "Old School" traditional Jeep look. Factory-style hangers, ball flange connection and quality hardware are included for a hassle-free install.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Jeep Wrangler | V | 3604 | 6 Cyl 3.6L | Sport S | 220 |
- MACH Force-Xp 2.5 IN 409 Stainless Steel Cat-Back High-Tuck Exhaust System w/Pol
- 2.5in. Tubing; 409 StainlessSteel; Includes Muffler Assy/Extension Pipe/Mid-Pipe/Tailpipe/Hardware/3.5in. Polished Tip; +9HP/8lbs./ft. Torque
- MACH Force-Xp 2.5 IN 409 Stainless Steel Cat-Back High-Tuck Exhaust System w/Polished Tip Jeep Wrangler (JL) 2018 V6-3.6L
- MACH Force-Xp Axle-Back Exhaust System
- Product Attributes:
- Tubing Diameter: 2.500 In.
- Exhaust Type: Axle-back
- Exit Position: Rear
- WARNING CA Proposition 65: Yes
-
Features:
- Outlasts and Outperforms Stock Exhaust
- Hi-Tuck Design For Clearance and Greater Approach Angles
- 100 Percent Hand MIG-Welded For Strength and Durability
- Factory Style Bayonet Hangers
- Ball Flange Connection
- Quality Hardware For Easy Installation
- If you want proven performance gains, more ground clearance and sound from your Jeep JL 3.6L 2 or 4 door, this Mach Force-XP cat-back exhaust system is what you need. 2-1/2" mandrel-bent 409 stainless steel tubing and 14" high flow muffler improves exhaust flow for increased horsepower and torque. In-house dyno testing resulted in gains of up to +9 horsepower and +8 lbs. x ft. of torque and delivers a noticeable exhaust tone. The Hi-Tuck designed tailpipe "tip" gives you extra clearance during extreme angle climbs or descents and an "Old School" traditional Jeep look. Factory-style hangers, ball flange connection and quality hardware are included for a hassle-free install.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Jeep Wrangler | V | 3604 | 6 Cyl 3.6L | Rubicon | 220 |
- MACH Force-Xp 2-1/2in 409 Stainless Steel Cat-Back Exhaust System w/Black Tip
- 2.5in. Tubing; Stainless Steel; Includes Clamps/Muffler/Hangers/Sectional Tubing/Hardware/Black Tip; +7hp/+14lbs. x ft of Torque
- MACH Force-Xp 2-1/2in 409 Stainless Steel Cat-Back Exhaust System w/Black Tip Toyota Tacoma 13-15 I4-2.7L
- MACH Force-Xp Cat-Back Exhaust System
- Product Attributes:
- Tail Pipe Material: Stainless Steel
- Tubing Diameter: 2.500 In.
- Exhaust Type: Cat-back
- Exit Position: Rear Side
- Tip Diameter: 2.500 In.
- WARNING CA Proposition 65: Yes
- Exit Style: Turn Out
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
-
Features:
- Mandrel Bent
- Free Flow System
- Increased Horsepower And Torque
- Increased flow
- Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2014 - Toyota Tacoma | L | 2694 | 4 Cyl 2.7L | 60.3 | Pre Runner | Crew Cab Pickup | - |
- Momentum GT PRO 5R Cold Air Intake System
- Includes Pre-Oiled Air Filter/Sealed Housing w/Air Scoop and Sight Window/Roto-Molded Intake Tube/Hardware; +14 HP/+13 Lbs. x Ft. Torque;Not Legal For Sale Or Use In California
- Momentum GT PRO 5R Cold Air Intake System Dodge RAM 1500 2019 V8-5.7L
- Momentum GT Pro 5R Air Intake System
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Outflows Factory Intake By Up To 44 Percent
- High Quality 1-Pc. Roto-Molded Sealed Housing
- CAD Designed Roto-Molded Intake Tube
- Built-In Sight Window Provides Easy Inspection Of Filter
- A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the auxiliary airbox. (US PAT 9440175) For Filter-to-Housing Interface. This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large (6-3/4" x 4-3/4") oval flange and is 9" tall with an inverted top. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Ram 1500 | V | - | 8 Cyl 5.7L | Limited | 345 |
- Street Series Rear Differential Cover Raw (Dana M220)
- Rear; 2 Quart Lube Capacity; w/Machined Fins; Raw Finish
- Street Series Rear Differential Cover Raw (Dana M220) Jeep Wrangler (JL) 2018 V6-3.6L
- Street Series Differential Cover
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Durable Cast Aluminum
- Magnetic Drain Plug
- aFe Power's new rear differential cover brings performance engineering to the protection of your axle's differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs and machined fins for maximum strength and styling. This cover comes with all necessary hardware for easy installation. This cover fits 2018 Jeep Wrangler (JL) Sport Dana M220 12 bolt rear axles. This cover has about a 2 quart lube capacity at the factory line. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This system incorporates a magnetic drain plug to capture loose particles for maximum rear-end protection. Also included is a 1/8" NPT calibration plug that is set to the factory fluid level which eliminates accidental overfilling.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Jeep Wrangler |
- Pro Series Front and Rear Differential Cover Kit w/Oil (Dana M186/M220)
- Front And Rear; 5 Qt. Capacity; Black Finish w/Machined Fins; w/Dana M186-12 And M220-12; Includes 5 qt. Pro GUARD D2 Synthetic 75W-90 Gear Oil Fits Models W/Dana M186-12/M220-12 Axles
- Pro Series Front and Rear Differential Cover Kit w/Oil (Dana M186/M220) Jeep Wrangler (JL) 2018 V6-3.6L
- Pro Series Differential Cover Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Durable Cast Aluminum
- High Temperature High Shear Stability
- Lowers Operating Temperature
- No Additives Required
- aFe Power's new front and rear differential covers bring performance engineering to the protection of your axle's differentials. These differential covers are constructed out of durable cast aluminum with reinforced ribs and wrinkle black powder-coating with machined fins for maximum strength and styling. These covers come with all necessary hardware for easy installation. Pro Series differential covers include an oil level sight glass and a deep reach magnetic fill plug for maximum protection.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Jeep Wrangler |
Showing 1 - 10 of 153 products
Loading...