2015 Ford AFE Filters Parts
Choose a Model for your 2015 Ford
Image
Product
Price
- SCORCHER HD Module
- Easy Plug and Play Installation; 4 Power Position Settings; Adjust Power Settings w/1 Button Switch;Not Legal For Sale Or Use In California HP Increase +60 hp; Torque Increase +90 lbs./ft.~ Increased Throttle And Acceleration Response
- SCORCHER HD Module Ford Diesel Trucks 11-16 V8-6.7L (td)
- SCORCHER HD Performance Module
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Direct Plug And Play Power
- Increased Turbo Boost And Fuel Pressure
- In Cabin On The Fly Power Adjustment
- 4-Power Position Settings: Stock
- Sport
- Sport+
- And Race
- Significant Power Gain And Reduce Turbo Lag
- Leaves No Trace On ECU
- Gains Plus 60 HP And 90 ft./lbs. Torque
- Put up to 40hp and 51lbs. x ft. torque to your N54 today! The aFe Power SCORCHER Module is designed to alter the pressure sensor signals to increase turbo boost to an optimum level throughout the entire RPM range. The result is a harmonious balance between power, throttle response and drivability. This module provides a hassle-free installation with no cutting, drilling or splicing required during the 30 minute installation time. Factory electronic accessories are not affected by installing the Scorcher module.
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - Ford F-350 Super Duty |
- aFe Control Rear Sway Bar
- Rear; Includes Aluminum Arms/Lightweight 3/8in. Rod End Links/Turn Buckles/Spacers/Hardware/Polyurethane Bushings/Center Rings
- aFe Control Rear Sway Bar Ford Mustang 15-16 (S550)
- aFe Control Sway Bar
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Adjustable Front And Rear Bars
- Specifically Designed For Camaro V8 w/ZL Spec Chassis
- Engineered To Optimize The Factory Shock Absorber Damping
- Powdercoat Finish For Unbeatable Look
- Direct Fit Installation
- Requires No Modifications
- aFe Control is proud to introduce the PFADT Series Heavy Rate Racing Sway Bar Front Service Kit for the 1997-2013 C5 & C6 Corvette. Corvette race cars see lots of action and this kit includes the most commonly damaged or worn components from the Heavy Rate Racing Rear Sway Bars.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2015 - Ford Mustang | Shelby GT350R |
- MACH Force-Xp 2-1/2in 409 Stainless Steel Axle-Back Exhaust System w/Black Tip
- 2.5 in. Tubing; Stainless Steel; Dual Rear Exit; Includes Tubing/Dual Mufflers/4 in. Black Stainless Steel Tips
- MACH Force-Xp 2-1/2in 409 Stainless Steel Axle-Back Exhaust System w/Black Tip Ford Mustang 15-18 I4-2.3L (t)/V6-3.7L
- MACH Force-Xp Axle-Back Exhaust System
- Product Attributes:
- Tail Pipe Material: Stainless Steel
- Tubing Diameter: 2.500 In.
- Exhaust Type: Axle-back
- Exit Position: Dual Rear
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Straight
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
-
Features:
- Dual High Flow Mufflers
- 2.5 in. Mandrel Bent Stainless Steel Tubing
- 4 in Double Wall Gloss Black 304SS Tip
- Hand Welded For Optimal Strength/Durability
- Includes High Quality Band Clamps
- Uses Factory Mounting Locations
- aFe is proud to introduce an all new Mach Force-Xp axle-back exhaust system for the 2015-2017 Ford Mustang with the I4-2.3L (t) EcoBoost & V6-3.7L engine. This axle-back exhaust system utilizes 2-1/2 in. stainless steel tubing and incorporates dual, high-flow mufflers to improve performance across the power band while maintaining an aggressive sound. To finish off the exhaust, dual 4 in. diameter gloss black 304 stainless steel tips are included. This system includes high quality clamps for a secure hassle-free installation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2015 - Ford Mustang | L | 2300 | 4 Cyl 2.3L | EcoBoost | 140 |
- aFe Control Rear Sway Bar
- Rear; Includes Aluminum Arms/Lightweight 3/8in. Rod End Links/Turn Buckles/Spacers/Hardware/Polyurethane Bushings/Center Rings Comes Factory w/2015 Ford Mustang S550
- aFe Control Rear Sway Bar Ford Mustang 15-16 (S550)
- aFe Control Sway Bar
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Adjustable Front And Rear Bars
- Specifically Designed For Camaro V8 w/ZL Spec Chassis
- Engineered To Optimize The Factory Shock Absorber Damping
- Powdercoat Finish For Unbeatable Look
- Direct Fit Installation
- Requires No Modifications
- aFe Control is proud to introduce the PFADT Series Heavy Rate Racing Sway Bar Front Service Kit for the 1997-2013 C5 & C6 Corvette. Corvette race cars see lots of action and this kit includes the most commonly damaged or worn components from the Heavy Rate Racing Rear Sway Bars.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2015 - Ford Mustang | GT |
- SCORCHER GT Module
- Plug And Play; 4 Power Position Settings; In Cabin On The Fly Power Adjustments;Not Legal For Sale Or Use In California HP Increase +30 hp; Torque Increase +51 lbs./ft.~ Internet Updateable
- SCORCHER GT Module Ford Focus ST 15-18 I4-2.0L (t)
- SCORCHER GT Performance Module
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Quick And Easy Plug And Play Installation
- Around 30 Minute Installation
- Dyno Tested And Produced Significant Power Increases
- Increase Turbo Boost To Improve Vehicle Performance
- Leaves No Trace On ECU (No Footprint)
- High Quality Case And Wire Harness w/Factory Style Connectors
- High Reliability
- 100% Of Units Tested
- Compatible w/Other aFe POWER Performance Products
- A simple 5 minute install gains you a huge increase in power. The aFe Power SCORCHER Module is designed to alter the pressure sensor signals to increase boost to an optimum level throughout the entire RPM range. The result is increased performance and improved throttle response across a broad power band as well as reduced turbo lag. In recent testing these modules produced +30 horsepower and up to +50 lbs. x ft. of torque verified by our in house dyno. Direct Plug In Power: This simple and safe plug and play module adds instant power by altering pressure sensor signals to increase boost to an optimum level throughout the entire RPM range. Blue L.E.D. Power Light: This module comes with a built-in blue L.E.D. light to show your module is powered up and functioning correctly. High Precision and Reliability: SCORCHER modules are 100% tested, have output protection on all signals and are built to a 0.1% tolerance on components in critical areas. Signal filtering is used for a smooth response. These modules work great on vehicles in stock trim but are optimized to maximum performance with use of aFe Power performance parts (intakes, filters, exhaust, etc.). High Quality Materials: aFe SCORCHER modules use OE style "all weather" connectors which require no modification to your factory harness, providing a secure factory-style fit and hassle-free installation. The housing is constructed of aluminum with a hard coat black anodized finish and uses Automotive grade TXL high heat and chemical resistant wire. SCORCHER Modules come with a 2-year limited warranty. NOTE: *Dyno Tested With Takeda's: Cat-Back Exhaust (49-33083)
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2015 - Ford Focus | ST |
- BladeRunner Intercooler Couplings/Clamps Kit; aFe Tubes Only
- Includes High Temp Silicone Coupler Set/Coupler Hose/Clamps; For Use w/Intercooler Tubes PN[46-20212-B/46-20214-B] Fits aFe Intercooler Tubes PN[46-20212-B][46-20214-B] Only
- BladeRunner Intercooler Couplings/Clamps Kit; aFe Tubes Only Ford F-150 15-16 V6-3.5L (tt)
- BladeRunner Intercooler Couplings And Clamp Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Outflows Stock Intercooler Tubes By 20%
- Powder Coated Textured-Red For Heat Resistance and Long-Life
- Bolt-On Kit Fits OEM Intercooler
- Uses High Quality T-Bolt Clamps And Heavy Duty Couplings Included
- Cold-Side Tube Upgrade
- Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2015 - Ford F-150 | V | 3496 | 6 Cyl 3.5L | 213 |
- BladeRunner 2 IN to 2-1/2 IN Intercooler Tube Hot Side Black
- Hot Side; 2 in to 2.5 in.; Includes Hardware; Fits OEM Intercooler; For Use w/Intercooler PN[46-20201];Not Legal For Sale Or Use In California
- BladeRunner 2 IN to 2-1/2 IN Intercooler Tube Hot Side Black Ford F-150 15-16 V6-3.5L (tt)
- BladeRunner Intercooler Tube
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Powder Coated Wrinkle Black For Heat Resistance
- Works w/aFe or OE Intercooler
- High Quality Clamps and Hi Temp Silicone Couplings For Durability
- Increased Flow and Performance For More Power
- Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2015 - Ford F-150 | V | 3496 | 6 Cyl 3.5L | 213 |
- Takeda Stage-2 PRO DRY S Cold Air Intake System
- Includes Oil-Free Air Filter/ 1 Piece Heat Shield/2 Piece 3 in. Intake Tubes; +14 HP/+15 lbs. x ft. Torque;Not Legal For Sale Or Use In California
- Takeda Stage-2 PRO DRY S Cold Air Intake System Ford Focus ST 15-18 I4-2.0L (t)
- Takeda Stage-2 Pro DRY S Air Intake System
- Product Attributes:
- Filter Material: Cotton Gauze
- System Type: Cold Air Molded Intake System
- WARNING CA Proposition 65: Yes
- Filter Color: Gray
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Color: Wrinkle Black
- Horse Power Increase: 14 Hp
-
Features:
- Uses Pro Dry S Air Filter For Maximum Convenience
- Outflows Factory Intake By 35%
- 1-Piece Heat Shield
- No Cutting Or Drilling On Factory Parts For Easy Installation
- Takeda intakes are constructed out of lightweight black wrinkle finish aluminum tubing or clear-coat anodized polished tubing for maximum air flow and a great style. This intake uses a large 360 degree high flow PRO Dry S air filter for maximum flow, filtration and convenience. The PRO Dry S air filter requires no oils and cleans with simple soap and water. Takeda intakes come complete with all tubing, filters, couplers and hardware for an easy installation.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 2015 - Ford Focus | L | 1999 | GAS | 4 Cyl 2.0L | ST | 9 | Turbocharged | 122 |
Showing 1 - 9 of 9 products
Loading...